Wow thank you!!! Just got it to work on my '05 Mustang. Dealer tried to explain it to me but couldn't figure it out till watching your video. Thanks!!!
good video, worked on my 2007 gt and i have a clifford aftermarket as well as the factory one. just use aftermarket remote to disarm aftermarket system when using factory alarm... (and vice-versa)
I tried it but after the locks, the buttons still don't work, I just bought the remote from Ford a couple months ago I don't think the battery could've died that fast could it?
A 70 YR. OLD HOTRODDER THANKS U, GREAT VIDEO, 1999 FOB WORKED FOR 2003 MUSTANG GT. CONVERT. EVEN TRUNK, MANY THANKS, U MADE MY DAY ps. remember to hold lock button down & turn fast
Brilliant! I lost the memory on one of my remotes a few years ago, just used the other one that came with my Mustang. Now I have two working remotes again. Thank you!
this dose not work with all mustang's, some mustang's like mine u have to put the key in the on position and go in the truck and touch 2 wires together in the drivers side panel. this was done with some mustang's starting in 1996 or 1997. the 2 wires will be together in a plug u just need a screw driver to touch them together and the locks will do the same thing as when u do the key 8 times
That was so easy...Thanks..Worked like a charm and saved me a whole lot of bucks. Your the man in my book this week. And now I can unlock my door without fumbling for the key
Although this technically works it isn't how you are supposed to program the keyless entry.
1. Turn ignition from OFF to RUN 8 times quickly (No need to hold any buttons)
2. This enables programming mode, the door locks will cycle to indicate this. press any button on the remote within 20 seconds and then take the key out.
3. The remote should now work.
I say this because by following the video instructions it may not work if you do not press any buttons after the initial 8 turns..
@iamtheman698 My remote is stock and I just replaced the batteries. I found a different site that tells how to do it for the 98 and older Mustangs... there's a two wire plug in the trunk, you have to jump the two together while the ignition is on and then press any button on the remote. Pretty crazy but worked just fine
Fuse 39 (gem fuse) under the dash on drivers side. Take it out for 20 seconds or longer then reinsert the 5 amp fuse. and try this youtube method again.
@91SiDerek yes it is most likely like mine u have to put the key in the on position and go in the truck and touch 2 wires together in the drivers side panel. this was done with some mustang's starting in 1996 or 1997
Wow man thanks a lot, just bought the car and thought I had to spend a lot of money fixing the keyless entry, replaced the battery and programmed it... Works Great :)
Thank you very much man this is very helpful, I went to the dealer today for a new remote for my 2002 F150 and they said it will be $79.99 to reprogram a new one for me.... Highway robbery if you ask me. Thanks a lot man!
And Another shout out goes to all the people out there who do simple video's like this and post it online!! The video's are so helpful, especially for the ladies (like me) who get taken advantage of at car dealerships lol :3 So thank youl! <3
I have a 2004 Ford Taurus and this worked on it!!! FINALLY lol >> I've had the batteries changed in it for 2 months and it would never work. I got to looking online and it lead me to this video, it took me a few times to get it to work, because had to time it just right lol. I took the remote of the key ring to make it easier lol. It did work for me thank you so much for the video and advice!! The dealerships so just wanna make a buck on these type of simple solutions. >>
worked fantastic, reprogrammed my sons keyless remote in seconds. Ford wanted 60.00 for remote and 60.00 to reprogram. Amazon had remote for 15.00. My sons car is a 2001 mustang. Thanks for the video!
Hey did you already have a working remote for your mustang? I want to buy a remote off ebay, but it says if I dont have a current remote then I have to go to the dealership to get it programed. Please let me know. thanks
thank you so much for the video. the keyless entry to my work van got broken. My bosses write us up if our vans are not fully locked so I purchased one of these and it did not come with instructions.
I just tried this and it WORKED. I purchased a 1999 Mustang that only has one key and one remote. The remote wasn't working and NOW IT DOES!!!!! Thank you! You Are The Man
@samantha455100 First of all, I made a mistake when making this video. You don't have to hold the lock button down while turning the ign. on and off 8 times. So turn your Ign on and off 8 times then but hit lock button on remote 1 then on remote 2. Then turn the ign to the off position.
Wow this worked the first time!!! on my 2002 Explorer,@ the ford dealership they wanted to charch me 70.00, just to reprogram my remote,this really helped thanks a lot!
I have a 1997 Mercury Grand Marquis GS and I got myself a remote control, same one you showed in the video. I did the ignition trick and it did not work. I gotta ask you. Does my car need a remote sensor on the front dash for the fob remote to work or no? & do you know how to re-program a Mercury Grand Marquis GS from 1997?
i got a 1999 f150 and that doesnt work i have the fob and everything i checked to make sure i had an alarm and its got a viper 100hf so idk why this doesnt work ??? my locks are really weak on my truck now but they still click when i press the button inside so idk why this doesnt work
Actually what happens is, after you move the key (one of the originals) forward and back 8 times, you have engaged the "key fob set up" and then at that point you have 20 seconds to program your remote or remotes, you can tell by the chimes. and at that point, you have to press the lock button once on each remote, until you here the locks in the car doors lock.
Thanks, worked like a charm on '03 Taurus. I saw a Lincoln dealer charge an elderly couple $150 to purchase and program a remote for Lincoln TC. Robbery!
u dont have to hold the lock button. I programmed a remote to my 02 Taurus by doing the key 8 times on and off, then pushing any button on the remote, then turn the key off. It worked too.
does anyone know how to program a oldsmobile bravada 2002? y got the remote for free, and the stupid dealer wanted to charge me 120.00 + instalation, please can someone help
Dude. Kick ass! you just saved me so much trouble. I though I had to go to the dealer. My remote stopped working. Changed out the battery. Still didnt work. Tried this method, worked perfectly. Thanks a bunch!!!
this worked on ford escort 1998 so works for more cars ford lincon mercury this remote is from mercury works they charge u like 80 but this works and its in cars mannual can u belive that
hey thanks for the help of this video it really helped me a lot and saved me money to thanks for posting up this video and like i said thank you very much
I just programmed two remotes. My method: turn the key ask described, but without holding a remote button. When you hear the door locks click (which was about 5 or 6 turns for me), leave the key on and press a button on the first remote within 20 seconds. Then, press a button on the second remote within 20 seconds. Worked perfectly on my 2000 Mustang.
You are the Man. I tried on my 2003 Mustang that had the computer replaced and the remotes did not worked. In less than 30 sec. all done. One thing, I did not have to hold the lock button while turning the key. Again, mine is a 2003. Thanks Man.
Thank you so much! I have a 02 taurus and it worked! i bought a new battery at first and swiched them thinking that it would work and it didn't, so i looked it up and your video was ther and it worked!
You don't have to hold the lock button on the remote to program. I just got the same remote off ebay for $16, and programmed it for my 2002 Mustang GT. All the steps were the same minus holding the lock button, maybe that will eliminate some problems for people.
ok i just tried it at my gf's 99 v6 mustang. it did lock and unlock but the remote wouldnt work. This remote is from my old 2006 mustang GT. can anybody help me out here please?
Nice video but it didn't work for me. I have a 1999 Ford Mustang. I got all the way to the last step. when I press the buttons to see if its working I get nothing, Weird because it does the whole process even when you press the lock button to tell you that it reads it. but after I turn the ignition off it doesn't work. Maybe I need a New Remote?
I bet it is the same thing I did... Make sure the ignition is still on the ON or RUN position DO NOT turn the key back to the off side. Once you hear the double clicks lock then unlock the dooors with the remote. Chances are they wont work right... They will lock and unlock with only one click. Thats normal just turn the key back and then try it normally it should be mint. I have a 2001 Cobra and Thats what happend. Also if you have one hold the clutch in.
01 ford mustang it gets the double click but after that the buttons stop working?
pbdubz 6 days ago
Wow thank you!!! Just got it to work on my '05 Mustang. Dealer tried to explain it to me but couldn't figure it out till watching your video. Thanks!!!
DarickPadre94 1 week ago
good video, worked on my 2007 gt and i have a clifford aftermarket as well as the factory one. just use aftermarket remote to disarm aftermarket system when using factory alarm... (and vice-versa)
zombiegrease 4 weeks ago
Awsome!
TTx04xCOBRA 1 month ago
I have a 2005 Mustang and this didnt work....
iB1iz 1 month ago
@iB1iz I have an '05 Mustang and it did...
DarickPadre94 1 week ago
worked fine thanks
Cory1510 1 month ago
Can you do it with two remotes at the same time??
lovefromdemon 1 month ago
Man it really work I tought it was a joke but it actually works !!
vatoface23 1 month ago
Trying it now.
xxINTOXIFADEDxx 1 month ago
This also works on a 2003 Ford Taurus SE but you don't need to hold down a button. Just turn it from Off to On 8 times until you hear them click.
acid1one 1 month ago
Worked GREAT, thanks, saved me a lot of time and money!!!
207nkf 2 months ago
eggselent video
djs259 2 months ago
Comment removed
burninhate33 2 months ago
i just saved 50 bucks, thanks man
hahaha12345678993 2 months ago
I tried it but after the locks, the buttons still don't work, I just bought the remote from Ford a couple months ago I don't think the battery could've died that fast could it?
burninhate33 2 months ago
It worked! Thank you so much!!! Ford wanted to charge me $60 to program my 04 Mustang.
dabear1075 3 months ago
A 70 YR. OLD HOTRODDER THANKS U, GREAT VIDEO, 1999 FOB WORKED FOR 2003 MUSTANG GT. CONVERT. EVEN TRUNK, MANY THANKS, U MADE MY DAY ps. remember to hold lock button down & turn fast
70RWJ 3 months ago
i have a 2003 mustang gt im hearing the locks but when i press the unlock again nothing....
somebody please help me... trying to surprise my son....
MrFedexdriver 3 months ago
Brilliant! I lost the memory on one of my remotes a few years ago, just used the other one that came with my Mustang. Now I have two working remotes again. Thank you!
fordwagonnut 3 months ago
Thank you for posting this!!!!! IT WORKED!!!
mindelson 4 months ago
hey gracias man buen trabajo how you show that
tin101976 4 months ago
Worked perfect on my 2000 GT vert!! Thanks alot!!!
JEMANF 4 months ago
Great vid bro. ☠
ACCSESS247 6 months ago
thats for 1 remote?.....what happened if i want to "deprogram" one of the remotes/....plz let me know!
djemontes 6 months ago
2001mustang, can't get it 2go into programin mode , can any 1help?
neji888 6 months ago
You f*ckin rock dude. They were going to charge me $40 for 15 seconds of work. Thanks.
ambersfool77 7 months ago
this dose not work with all mustang's, some mustang's like mine u have to put the key in the on position and go in the truck and touch 2 wires together in the drivers side panel. this was done with some mustang's starting in 1996 or 1997. the 2 wires will be together in a plug u just need a screw driver to touch them together and the locks will do the same thing as when u do the key 8 times
klpecoraro4 7 months ago
Worked for me! Thanks a bunch!!
tootbloom 7 months ago
will it work on my 03 cobra?
FlawlessVizionz08 7 months ago
That was so easy...Thanks..Worked like a charm and saved me a whole lot of bucks. Your the man in my book this week. And now I can unlock my door without fumbling for the key
bham4ever 7 months ago
Good video. I actually got my instructions from keylessfobprogramming. com
I guess a video is a little easier to follow.
MakeAnimatedMovie 7 months ago
This has been flagged as spam show
Can I try it on the Marquis 2009 ls
thrthr300 7 months ago
This has been flagged as spam show
Can I try it on the Marquis 2009
thrthr300 7 months ago
Freakin awesome video man. Do you know how to program one for a 94?
justinsn95 8 months ago
Although this technically works it isn't how you are supposed to program the keyless entry.
1. Turn ignition from OFF to RUN 8 times quickly (No need to hold any buttons)
2. This enables programming mode, the door locks will cycle to indicate this. press any button on the remote within 20 seconds and then take the key out.
3. The remote should now work.
I say this because by following the video instructions it may not work if you do not press any buttons after the initial 8 turns..
shibby35263 8 months ago
@shibby35263
He said to hit lock again when he was done you deaf fuck so fuck you and fuck your comment!
ambersfool77 7 months ago
And the award for hero of the day goes to .... The maker of this video!
Thank you so much! Worked perfectly
VladTV22 8 months ago
That was not hard
mccrackenphillip 9 months ago
Is this a hack?..or is it how Ford does it?
fernfeyes 9 months ago
Well this didn't work on my 98 GT... any suggestions???
91SiDerek 9 months ago
@91SiDerek
Is your keyless entry stock or aftermarket?
Is your battery in the remote good?
iamtheman698 9 months ago
@iamtheman698 My remote is stock and I just replaced the batteries. I found a different site that tells how to do it for the 98 and older Mustangs... there's a two wire plug in the trunk, you have to jump the two together while the ignition is on and then press any button on the remote. Pretty crazy but worked just fine
91SiDerek 9 months ago
@iamtheman698 thanks 4 keeping it quick, simple, and for heaven's sake MUSIC-LESS!
honeybun33 5 months ago
This has been flagged as spam show
Fuse 39 (gem fuse) under the dash on drivers side. Take it out for 20 seconds or longer then reinsert the 5 amp fuse. and try this youtube method again.
MrRiiiccckkkyyy 4 months ago
@91SiDerek yes it is most likely like mine u have to put the key in the on position and go in the truck and touch 2 wires together in the drivers side panel. this was done with some mustang's starting in 1996 or 1997
klpecoraro4 7 months ago
@klpecoraro4 I think it works for 94-98 as long as it had the key-less entry option from the factory but I could be wrong.
thirdgenguy17 7 months ago
@91SiDerek Check out my video for 94-98 Mustang Key-less remote programing if you still having problems figuring it out.
thirdgenguy17 7 months ago
Comment removed
MrRiiiccckkkyyy 4 months ago
Does pressing the lock button twice blow the horn when locking the doors like on most remotes?
ltrebl 10 months ago
Wow man thanks a lot, just bought the car and thought I had to spend a lot of money fixing the keyless entry, replaced the battery and programmed it... Works Great :)
atomikobigmac 11 months ago
Do you by any chance know how to deprogram or uninstall one? (how ever you say it)
solishs 11 months ago
Work on my espedition 2002 thank's so much
n36r05 1 year ago
Thank you so much!! It worked! Now my sister considers me her hero!! LoL! AWesome awesome POst!
mrsheatherdc 1 year ago
Thank you. Worked great
walk2hard2 1 year ago
Thank you very much man this is very helpful, I went to the dealer today for a new remote for my 2002 F150 and they said it will be $79.99 to reprogram a new one for me.... Highway robbery if you ask me. Thanks a lot man!
XxTournaquetxX 1 year ago
And Another shout out goes to all the people out there who do simple video's like this and post it online!! The video's are so helpful, especially for the ladies (like me) who get taken advantage of at car dealerships lol :3 So thank youl! <3
awnryredhead 1 year ago
I have a 2004 Ford Taurus and this worked on it!!! FINALLY lol >> I've had the batteries changed in it for 2 months and it would never work. I got to looking online and it lead me to this video, it took me a few times to get it to work, because had to time it just right lol. I took the remote of the key ring to make it easier lol. It did work for me thank you so much for the video and advice!! The dealerships so just wanna make a buck on these type of simple solutions. >>
awnryredhead 1 year ago
cool JUST ACTIVATED MY REMOTE FOR 2007 MUSTANG GT ! EASY THANX !!!
MrN0bady 1 year ago
is there a way to add range i have a 95 taurus same remote but the distance is short
ezkeyboardkid58 1 year ago
Nice!!! Worked like a charm on my son's 99 mercury mountaineer. Any easy way to program a second key?
MrMikeMcCormack 1 year ago
looks like this may work on all fords. dad had the same remote on an expedition
yamoo001 1 year ago
worked fantastic, reprogrammed my sons keyless remote in seconds. Ford wanted 60.00 for remote and 60.00 to reprogram. Amazon had remote for 15.00. My sons car is a 2001 mustang. Thanks for the video!
kidkaras 1 year ago
@kidkaras i tried this bought it 15.00 on 1994 mustang GT locks never worked after 8 on offs whats wrong
Rm125m 1 year ago
@Rm125m , Is the battery in the remote ok? 1994 is your keyless entry aftermarket or factory?
iamtheman698 1 year ago
thank you man!!!!!
it worked on a Ford Focus SE 2001
saved money thanks dude
worked around the 6 time i turned the key
awesome
martincanaca 1 year ago
thanks u save me from buying a new one i thought mine broke
marcogastelum 1 year ago 4
@marcogastelum
:-)
iamtheman698 1 year ago
worked on a 98 windstar, but the locks did their thing about the 5th 'turn on'. Thanks.
phlatulance 1 year ago
Would this work on a 2001 trans am?
2001tranzam 1 year ago
Nice, worked like a charm. Thanks.
mcmadson 1 year ago
Hey bro I found thsi same remote for my 197 mustang. will it work the same as urs?
corvettechristian 1 year ago
Hey did you already have a working remote for your mustang? I want to buy a remote off ebay, but it says if I dont have a current remote then I have to go to the dealership to get it programed. Please let me know. thanks
sk8erboy509 1 year ago
@sk8erboy509
No I bought if from ebay because i lost my keys and remote.
iamtheman698 1 year ago
Think i would work on a 1996 Lincoln?
Rare92Mustang 1 year ago
@Rare92Mustang if you know, plz tell me! im tryin to find out the same thing!
williamtword 1 year ago
will this work for my 1994 ford mustang?
tyler5569 1 year ago
No need to hold down the lock button while you turn the key back and forth 8 times. Just hit the butter after you hear the locks go.
tjtrail 1 year ago
thanks bro it worked
Qvole1 1 year ago
Nice. Worked on my '99 Mustang. I'd rather use visual instructions because the ones it came with were not as straight forward as this video.
YoTonyValdo 1 year ago
o man thank thank you i love u!!!! hahaha
drmmer101 1 year ago
Worked like a champ for a 2000 Focus. I have an aftermarket remote starter that wouldn't respond, but heck, this is so cool.
ajhenry1944 1 year ago
thank you!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
sho4life 1 year ago
thank you so much for the video. the keyless entry to my work van got broken. My bosses write us up if our vans are not fully locked so I purchased one of these and it did not come with instructions.
debocase13 1 year ago
Hey quick question thanks for the video..If i already have 2 programmed and want one more will it unactivate the other 2?
excursionboy22 1 year ago
works on my ford explerer tanks
100ELECTRICO 1 year ago
I just tried this and it WORKED. I purchased a 1999 Mustang that only has one key and one remote. The remote wasn't working and NOW IT DOES!!!!! Thank you! You Are The Man
tswhite30 1 year ago
"Ford wanted to charge me $100.00 for the remote! Also $60.00 to program it!"
No wonder this Country and the economy is in the shape it's in with all the crooks out there.
TheKeckman 1 year ago
thanks man it's works on my P-71 crown vic 1999
king911love 1 year ago
it worked on my 2009 ford focus it took 3 seconds thank you!
acip4u 1 year ago
This worked on my 2003 ford fucus! but how do I program 2 of them?
samantha455100 1 year ago
@samantha455100 First of all, I made a mistake when making this video. You don't have to hold the lock button down while turning the ign. on and off 8 times. So turn your Ign on and off 8 times then but hit lock button on remote 1 then on remote 2. Then turn the ign to the off position.
iamtheman698 1 year ago
hey dude can this work on a 1997 mustang gt???
eddy71193r 1 year ago
This is great it really works! Did it on my 2009 Mustang!!
CelineCourtney 1 year ago
can anyone tell how i can program for my vw jetta 2000 ? thanks
afgrules09 1 year ago
Wow this worked the first time!!! on my 2002 Explorer,@ the ford dealership they wanted to charch me 70.00, just to reprogram my remote,this really helped thanks a lot!
rayasgom 1 year ago
I have a 1997 Mercury Grand Marquis GS and I got myself a remote control, same one you showed in the video. I did the ignition trick and it did not work. I gotta ask you. Does my car need a remote sensor on the front dash for the fob remote to work or no? & do you know how to re-program a Mercury Grand Marquis GS from 1997?
Thanks,
Maverick
texasmaverick1983 1 year ago
worked on my 98 explorer first try!! sweeet
TheDane87 1 year ago
Worked like a charm on my 03 GT. TY Sir!
TT03GT 1 year ago
Worked on my '05..Thanks!!
man1982100 1 year ago
can you tell me what other vehicles this will work for?
riddlerthemarine 1 year ago
Just tried it on my '05 Mustang, and it worked!! Thank you sOOOO much!! :)
Eli5on 1 year ago
just bought for a toyota camry 2001? will it work on that?
sumdog747 1 year ago
i got a 1999 f150 and that doesnt work i have the fob and everything i checked to make sure i had an alarm and its got a viper 100hf so idk why this doesnt work ??? my locks are really weak on my truck now but they still click when i press the button inside so idk why this doesnt work
MPRdrummer 1 year ago
i just bought a 94' mustang and im not sure that i hav the original key?! will this method still work if it's not the original key?
redheadscute89 1 year ago
Will this work for a '1994 Ford Mustang GT'?
Markanthony32102009 1 year ago
thanks for saving me my hard earned cash........thank you
iwllkilluall 1 year ago
thankzzzz it work on ma 02 escape
SUCKITINMIAMI 1 year ago
Hey would you happen to know if this would work on a 1999 Ford Explorer ? Thanks
windomino 1 year ago
OMG! thank you so so so MUCH!!!! youve saved me soo much trouble man, thanks :)
rossvinskas 2 years ago
@ImNotSorryInc Then you have to press and hold the lock button on both remotes,
rossvinskas 2 years ago
@rossvinskas oh and i forgot, that you have to do them at the same time.
rossvinskas 2 years ago
Actually what happens is, after you move the key (one of the originals) forward and back 8 times, you have engaged the "key fob set up" and then at that point you have 20 seconds to program your remote or remotes, you can tell by the chimes. and at that point, you have to press the lock button once on each remote, until you here the locks in the car doors lock.
rossvinskas 2 years ago
thanks mate do u know were i can buy a spare key for the 2002 mustang im in england
carlmadboy 2 years ago
THANKS DUDE!
DJMAKABR0 2 years ago
will this work in 2002 honda accord?
narendar2009 2 years ago
Thanks, worked like a charm on '03 Taurus. I saw a Lincoln dealer charge an elderly couple $150 to purchase and program a remote for Lincoln TC. Robbery!
impalsragtop 2 years ago
Thanks to this video I was finally able to program my keypad thats been in the drawer for months. Thanks alot!!!
chrisivy2006 2 years ago
u dont have to hold the lock button. I programmed a remote to my 02 Taurus by doing the key 8 times on and off, then pushing any button on the remote, then turn the key off. It worked too.
brandonya1990 2 years ago
This has been flagged as spam show
@ImNotSorryLnc
it will still work dude!
cashmoney0917 2 years ago
Comment removed
cashmoney0917 2 years ago
will it work in 94 mercury sable??
cashmoney0917 2 years ago
Thank you very much.
badassgt 2 years ago
does this works on any car, mine is a 04 ford focus
setesientas 2 years ago
will this technique work for a Mustang 2003?
josephtristan 2 years ago
@josephtristan
yes
iamtheman698 2 years ago
@josephtristan IT SHOULD
fade915 2 years ago
10000000 thanks
ALI197519751 2 years ago
thanks thanks thanks thanks
anticristo2k7 2 years ago
Great tip
irobot2k 2 years ago
thank you so much.. you help me so much.. I had to sign in just to think you..
m007amd 2 years ago
does anyone know how to program a oldsmobile bravada 2002? y got the remote for free, and the stupid dealer wanted to charge me 120.00 + instalation, please can someone help
amigatete224 2 years ago
does any kno how program a keyless entry remote for a dodge neon 03...plz comment back.
NeonEvo41 2 years ago
Anyone know if this works for SN-95 (94' - 98') Mustangs?
dan9tran2 2 years ago
Dude. Kick ass! you just saved me so much trouble. I though I had to go to the dealer. My remote stopped working. Changed out the battery. Still didnt work. Tried this method, worked perfectly. Thanks a bunch!!!
jblmp215 2 years ago
awsome
sethrobey777 2 years ago
this worked on ford escort 1998 so works for more cars ford lincon mercury this remote is from mercury works they charge u like 80 but this works and its in cars mannual can u belive that
TheA911a 2 years ago
Thank You, for sharing this info your the best.
mariagon80 2 years ago
its so bad that they charge you so much to do something so easy
namieownz 2 years ago
thank you for sharing this knowledge ! you're helping us save ALOT !
yuribe22 2 years ago
hey thanks for the help of this video it really helped me a lot and saved me money to thanks for posting up this video and like i said thank you very much
krazymanny7 2 years ago
Thanks for the video. Its quick, to the point, and it works.
civicanimosity 2 years ago
hi ,can you tellme how can i programing my remote control in my mustang 98?thanks
zantoscoy 2 years ago
I just programmed two remotes. My method: turn the key ask described, but without holding a remote button. When you hear the door locks click (which was about 5 or 6 turns for me), leave the key on and press a button on the first remote within 20 seconds. Then, press a button on the second remote within 20 seconds. Worked perfectly on my 2000 Mustang.
wintermute740 2 years ago
This has been flagged as spam show
does anyone know if this works on a 98 mustang?
pookie8273 2 years ago
thanks!
d2dseymour 2 years ago
thanks thanks thanks a lot dude
the dealer want to much for this operation but i did with your help in 30 sec. on my 2005 ford mustang ...
thanks a lot
KISSDASE 2 years ago
thank you so much.
1860volcomguy1 2 years ago
nice........ fuck the Dealers!
crsl33 2 years ago
listen i did that to my honda accord 99 to see if work it din;t . work wat i have 2 do
TEQU1LLO 2 years ago
You have to do something different with different types of vehicles. Google it.
kraftjesse 2 years ago
Worked on my 2003 GT from the first try!!
THANKS!!!
hEEdLesSLy 2 years ago
THX got it first try!
atlantabkid 2 years ago
You are the Man. I tried on my 2003 Mustang that had the computer replaced and the remotes did not worked. In less than 30 sec. all done. One thing, I did not have to hold the lock button while turning the key. Again, mine is a 2003. Thanks Man.
babylatino56 2 years ago
Will this work on a 97
romeroluz7 2 years ago
hello i got an 05 ford explore and mine stop workin lol and i tried that and it dident work lol what dod i do where can i buy a remote from >?
NEIL4SHO 2 years ago
Thank you so much! I have a 02 taurus and it worked! i bought a new battery at first and swiched them thinking that it would work and it didn't, so i looked it up and your video was ther and it worked!
Thanks alot!
mikeyr260 2 years ago
if none of these options work (holding lock button/not holding lock button) does that probably mean the remote is bad?
etrnldragon 2 years ago
Will this work on a 97 Gt ? Becuase my car currently does not want to start on the fact that I lost my keyless remote, haha.
eternal10111 2 years ago
You don't have to hold the lock button on the remote to program. I just got the same remote off ebay for $16, and programmed it for my 2002 Mustang GT. All the steps were the same minus holding the lock button, maybe that will eliminate some problems for people.
KlockworcX 2 years ago
ok i just tried it at my gf's 99 v6 mustang. it did lock and unlock but the remote wouldnt work. This remote is from my old 2006 mustang GT. can anybody help me out here please?
doodad 2 years ago
LOL SAVED ME $160 (2 remotes)!
JUNIORxMAFIAx4xLIFE 2 years ago
Read my reply above it might help.
JUNIORxMAFIAx4xLIFE 2 years ago
Nice video but it didn't work for me. I have a 1999 Ford Mustang. I got all the way to the last step. when I press the buttons to see if its working I get nothing, Weird because it does the whole process even when you press the lock button to tell you that it reads it. but after I turn the ignition off it doesn't work. Maybe I need a New Remote?
sulside 2 years ago
I bet it is the same thing I did... Make sure the ignition is still on the ON or RUN position DO NOT turn the key back to the off side. Once you hear the double clicks lock then unlock the dooors with the remote. Chances are they wont work right... They will lock and unlock with only one click. Thats normal just turn the key back and then try it normally it should be mint. I have a 2001 Cobra and Thats what happend. Also if you have one hold the clutch in.
JUNIORxMAFIAx4xLIFE 2 years ago
do you know or anybody else you know can figure out how to do that on acura cl 2001?
dipsetallstar7 3 years ago
WORKS ON THE 05 MUSTANG THANKS...
KSMCGATHEY 3 years ago
REMOTES Rattler EZSDEI474P KEYLESS on a 94 civic ?? does it work the same??
meEnLiEw 3 years ago
you are the shit for makin this vid bro. thanks so muh
Bastankhah 3 years ago
will you do a video but you click the lock button twice so we can hear what type of horn sound it makes? please a quick video please thank you!
bridgefa9 3 years ago
Sorry, but I lost my battery charger for my cam. I can't make anymore videos until I replace it or get a new cam. Really sucks!
iamtheman698 3 years ago
wait so your saying that it wont work with one keyless remote? cuase i only have one and its a 99 also
mariolincon 3 years ago
Thank you
amadorcanales 3 years ago
Thank you very much
amadorcanales 3 years ago
thanks for the info man
kweber101 3 years ago