Wiring car stereo & car amp with computer power supply

[sawmassacre13]

Are all the yellow wires 12v ? And can I connect all of them together to get best power ?

[MrKillabeez2]

@sawmassacre13 yes, especially if you have multiple rails on the power supply,, just remember the more amps the power supply can supply the better!

[sawmassacre13]

@MrKillabeez2 Thanks

[supashaker1]

I know no.1 will read this and help me but if u got a 900w edge subwoofer with built in amp would you recommend a psu for me guys and could I just get a RCA aux cable and just listen to my iPhone from it only bass please help me because I have to annoying my neibourgh who said bass was ther worse thing ever so I can show him how awesome it is plzzzzzz help me plzzzzzz plzzzzzz

[MrKillabeez2]

@supashaker1 There should be power requirements for the subwoofer i\f it has a built in amp. You need to look at the amps, and find a power supply very close or more than the required amperage. Yes you can get a 3.5mm audio adapter to left and right rca out adapter or cable and hook it to the amp.

[stan464]

@MrKillabeez2 Yeh true, i remember when i started on eletronics, getting nastey zaps from 240 volts and Capacitors and such, Really hurts xD, but nice video anyways.

[stan464]

@MrKillabeez2 Guessed you knew what you was doing, just thought id point it out :)

[MrKillabeez2]

@stan464 No problem, but it is a good thing to let people know... This work is not for the average person. Some soldering and electrical experience is required.

[vinon3]

i have a 3200 car amp. when i hook up in 300w psu. it is in protect mode. but when i remove the fuse. it becomes normal....help me please to solve this problem,,

[MrKillabeez2]

@vinon3 How many amps does the 12V line on the power supply have? you may want to check out how many amps the car amp requires to run.

[FreezEntertainment]

cool setup! what song is that btw in the background at the beginning ?

[jdbearbasher48]

im not quite sure, i cant quite figure out how to hook up the remote wire from the amp to the deck? do you somehow have to hook it up to the power?

[MrKillabeez2]

@jdbearbasher48 The remote wire must be hooked up to a 12V power source, so if you just have a remote pwr out from the deck, then use that power... otherwise just hook it up to the regular 12V line.

[rickybass96]

man the camera picks up good bass

[MrKillabeez2]

@rickybass96 Thanks, im actually recording this off of my phone at the time. Nokia N86 8MP

[stan464]

That looks very very very dangerous, exposed cap's and such, Be careful or you will blow your hands off xD

[MrKillabeez2]

@stan464 I am aware of the safety issues, the enclosure is usually on the power supply, it was just removed to show the power connections and joining of the wires.

[baszika]

the amp is running from a PSU....and the cd player from a nother PSU....the amp is turning off when you turning of the cd player??

[MrKillabeez2]

@baszika The amp would stay on, I prefer to have a psu for each device (amp, deck) So if one fails it wont take everything down with it.

[tctk1]

good lil wayne

[MrKillabeez2]

@tctk1 Damn skippy.

[bulgariancwalk]

what power must be a PC Suply for 350 Watts AMP and 600Watts Sub?