Drive shaft nuts on front-wheel-drive cars are typically torqued up to 300 foot pounds. If threadlock or rust has sealed the joint, the torque to undo it will be a lot more. Will this tool do it or is it still a case of having to stand on a 3/4" drive breaker bar? (I've already broken one or two one-nut-wonder electric wrenches) To be honest some of these tools are only suitable for lug nuts on compact cars and 150 foot pounds is their absolute limit (if you are lucky)
That might be the worst demonstration I have ever seen. Thank you for making me appreciate my snap on. Not impressed to see lugnuts come off and on amateur
Ingersoll Rand is great. They are high priced but great. I bought the craftsman 1/2 in drive inpact that runs on a 19.2v c3 battery. The pack charges in 1 hr. So far I have adjusted 1 of my dirt bikes rear tires several times rotated tires on my truck and gf's car changed Lmower blade torn dorn my YZ engine and havent changed the battery or had a loss in power. It seems to be better deal for the money.
how about Hunter Robby and any other girls request each other on facebook and message each other on there own time instead of wasting my time reading your stupid shit while trying to take in info about this impact. Nobody gives a fuck, what is this drama queen central? Why must people make corny videos and over exaggerate the no load part? Snap on clearly will overtake anything else when it comes to tools. I have never seen a tool take so much stress in my life as a snap on
@mickblock They aren't saying how well it works. They are stating its the best impact wrench out there. I have owned a 2135Ti model and it was a beast. Never gave me any problems, is light and tons of power (air driven). If either of those were to go against rusty exhaust bolts, it would just snap them off under the guns amount of torque.
@addvanced YEAH WELL...you cant show any torque responce by free handling a the torque wrench like he did..A 10 volt impact driver could show the same kick as that thing..
hahahh thats not even the number.back my mouth up how? you havent either on ANYTHING you said. i told you they give a 2 year warranty and offer a 5 year extended warranty.why is that so hard for you to understand? but i do have to laugh every time you say "robbie" it proves me right.oh and asshole grow up 40 year old fags dont type lmfao.
@robby844 There you go again little boy LMFAO can your read what you post simply says they have a warranty nothing in anythging you have ever posted says 5 years are you really that fucking supid LMFAO!!!!
robbie and mactco your not very good at playing two people at once you both posting from the same IP addy do you suck each others dick also or are you the same person?
@HunterCO1 really so you ran our ip's with out "are" consent? you know that jailtime right? well we know you love big dicks since your riding one right now.
@matcotoolguy68 not according to an IP trace try again robbie child your a fucking idiot now how about you get over the fact your a fucking moron and really just proved that. You needed to create another account so you could play two people to pretened you could compete on youtube.
i dont know what to think about you hunter. i wish you luck in life. big tools and a big box. ,i know you wouldnt want to but if you sold it all today what do you think you would get out of your snapon empire?
@HunterCO1 the point is you got took and dont even knowit . you wear that s on your chest which dont even matter anymore in the tool world anymore.tool companies are making snap, mac,cornwell and matco look like fools.putting out a product that other companies make for them . if you dont think they do , i can pick a snap on catalog apart along with mac and matco and cornwell . yeah the do make rachets and sockets but thats about it
@matcotoolguy68 yeah he claims that snapoff is 100% us made.its not.they ship wrenches in from china and put them in the press and have usa stamped in them.hes just hurt cuz he lied.
@robby844 i dont think he lied he just doesnt understand the tool market,if hes never been anyting other than snapoff( aka mary kay )he wouldnt know. they do pretend that they have 100 percent usa tools. i agree
@matcotoolguy68 lol yeah.all of the electronics are made in china just slapped with a us tag.if not they look odd looking like gook tools from other companies
@matcotoolguy68 dipshit you all sell certain tools made by (let me help you jackass) lisle, kd, otc, kent more ect. I am talking about the tools each company actually makes.
Nobody on the face of the planet earth can touch snap-on hand tools they have the best tool steel ever hands down.
matco dealer is coming with some cordless stuff if it is what he says and i will put it up against snap on then I will buy it.
@HunterCO1 dumbass thats just a screen name i could careless about matco either, i cant bust a grey socket or a sunex socket, but i can split a snapon down the middle,explain that one
@matcotoolguy68 dipshit nice cop out you must have learned that from robbie he always does that when he gets cornered with his stupidity.
I asked you a very siimple question what serperates matco from snap on its not a very hard answer if you do it for a living intstead of run your pie hole on youtube.
@HunterCO1 dumbass danher owns the armstrong companty along with gearwrench , kd matco,etc etc, danher is the name of the corparation.listen to me and youll learn
@matcotoolguy68 you like me to make an ass of you since you and robbie are complete dipshits and you never did answer my question why matco is better?
You gave a typical robbie dipshit response you avoided the question.
So why is matco better lets her an intelligent response...Youtube is waiting
@HunterCO1 one its not snapon. two is cheaper. three has the same warranty four i like better,not my favrorite but better to me. now answer my question why have i had grey china sockets that never bust and i can split a snapon down the middle? and yes the snapon is a impact sockets??????????? , dont worry about ass out of me hoss i can sit here all night if i want to
@matcotoolguy68 wrong dumbfuck its not cheaper its more expensive. You just proved your a fucking idiot. oh and little boy I can sit here all night also so if you want me to make a complete fucking idiot of you some more let me know.
@robby844 dumbfuck you already admited you dont have any tools much less you would not know the value or what they cost so why are you commenting you complete jackass??
@robby844 see you robby nice talking at you ,its been fun,hunter grow up and you might make it in the real world, and i hope i learned you a lesson tonight , dont let you mouth write a check your ass cant cash
@robby844 Little boy while you were talking to your self I was in bed since I had to work. So tell everyone how a real mechanic such as yourself works with no tools and you have admitted you don't have?
Never mind just humor me with more of your fucking stupidity It brightens my day that someobody as fucking stupid as you can still remember to keep breathing LOL!!!!!!!!!!!!!!
@HunterCO1 so by saying "i dont claim to own any tools" you think i dont own any because i said that? and you werent in bed you were too big of a pussy to reply. how do i know? i replied 22 seconds after you replied to me.
@robby844 little boy I am only going off what you have proven and said not much more I can do on youtube. If you want to prove me wrong feel free and not the typical robbie jackass post of "I proved you wrong" wont work you will actually have to back your mouth up.
@HunterCO1 back my mouth up on what i have claimed nothing.im not a pussy like you.and cunter its robby not robbie.oh wait i forgot you dont know how to read.
@robby844 yep your right you have not claimed anything or ever backed you mouth up so whats new I see the people on youtube have not missed anything except for you doing what you do best makeing an ass of yourself LOL!!
@HunterCO1 "makeing" an ass out of myself? how is that? i have done nothing to be "makeing" an ass out of myself.but you on the other comment on every damn vid and claim you know every damn thing but in reality you know NOTHING
@robby844 well little boy yes you have made an ass out of yourself you see it is up to you to back your mouth up and as of yet you have not done that!
@HunterCO1 back it up to what? i have nothing to prove.you keep telling me that over and over and over but yet i have posted NOTHING i need to prove other than my point that your a FUCKtard and cant read.and i dont have to prove that since you do it for me with every comment you post
@robby844 littleboy keep digging you just proved my point you always back out and make an ass of your self for once just stand up to a question and answer it. I know its easy to make an ass of yourself but youtube is getting tired of your busllshit!!! LOL more fun with robby this child is the laugh of a life time it never ends!!
@HunterCO1 back out of what? i have no reason to post anything. you just keep telling me that im a little boy and i lie.prove to me that i lie. that simple tell me what i have to prove myself about.
@robby844 little boy stop makeing excuses thats all you do if somebodey asks you to make a point you claim you dont need too. If somebody asks you to prove anuything you have said once again you claim you dont need too............Well guess what little boy in real life you must back your mouth up and so far you are the youbube king of makeing a fucking ass of your self.
Not once ever have you backed anything you have ever said up.
Little boy lets play some more. I am haveing fun...LOL
@HunterCO1 i have backed up everything i have said with both pms to you and posts in the comment section.ok heres ir's warranty lets go over this AGAIN next post will be the policy
@HunterCO1 By choosing an Ingersoll Rand product, you have selected a well-crafted, highly engineered product from a company with over 125 years of experience in the industry.
To demonstrate our confidence, every piece of Ingersoll Rand equipment is backed by a full warranty. For warranty specifics, availability and details, please contact your local Ingersoll Rand authorized service provider.
@robby844 how would you know you have clearly stated you don't own a toolbox nor do you have any tools you fucking moron.
Also you never showed where IR gives your mythical 5 year warranty as it don't exist remember little boy I called them and they said your full of shit.
Keep it coming little boy you like a plastic fuck doll cheap and entertaining.
@HunterCO1 asshole i never said i didnt own a toolbox.i do own a toolbox but its not like your buddies that you posted.lol you keep saying you called but my superiors say nobody called.i find you amusing that you have an excuse for every thing but yet you know nothing.you also made a claim on another vid that ir didnt make a air gun that put out over 80k torque.which we know you were full of shit for claiming that
@robby844 jackass stop makeing a fucking idiot of your self and post the facts. I gave you the number I called in another video and once again please post the 5 year warranty that does not exitst.
I will keep makeing you look like a fucking idiot if you wish I will never stop so just give it up already.
@HunterCO1 you never ever posted any numbers.i gave you the number to call i gave you my warranty info i gave you my employee number.im not "makeing" myself look like anything.you are the "little boy" thats thinks he owns a tool box worth 150k and you dont have shit.if it was your box then why did it take you 3 weeks to post the vid? you still havent proved me wrong about the warranty thing and you never will
@robby844 I asked a simple question you fucking idiot post the 5 year waranty you makde the thye claim now back it it up or shut the fuck up already do you really love for me to make you look like a fucking idiot LMFAO!!!
@HunterCO1 hahahah not only does it prove me wrong but it proves you wrong as well.you can contact ir after you buy your tool and get an extended warranty.and yes i posted the direct number to the warranty center 7 times and sent you the number in pm's more than that.its not my fault you are a retard and cant pick up a phone and call a damn number.and im still waiting on your comment about the matco ratchet.i wanna hear it.
@robby844 back to the same ol bullshit robbie cant back his mouth up. LMFAO
Since robbie will not back his mouth up you all feel free to call IR they give a two year warranty. Robbie never gave a number my advice is to call them your self as all robibe will do is claim he proved you wrong on youtube!
If you feel the need to contact IR (800)392-5728 Ext. 3
feel free and of course ask them if they know robbie I am sure they will LMFAO....
@HunterCO1 hahahh thats not even the number.back my mouth up how? you havent either on ANYTHING you said. i told you they give a 2 year warranty and offer a 5 year extended warranty.why is that so hard for you to understand? but i do have to laugh every time you say "robbie" it proves me right.oh and asshole grow up 40 year old fags dont type lmfao.
@robby844 hahah ok are you twelve years old give the number then jackass. That is the number that IR's website gives sorry it dont work for you so give the number you claim you gave me!!
Oh and little boy I called them its a 2 year warranty not 5 but hey why not for once in you life give the secret number for everyone to call.
This 40 year old fag has called you out not back you mouth up jackass!!
@HunterCO1 oh im sorry cunter see i had something grownups like me call a job to go to.so sorry i didnt reply to your baby ass last night.see thats the number the website gives not the one i told you to call.oh but i like this line. "called you out not back you mouth up jackass!!" that just proves my point doesnt it. but thats not as grteat as "i dont own a dime of any of it" cant beat that one eh?
@HunterCO1 ok cunter let me do the simple math for you since you are too retarded to understand.the tool comes with a 2 year warranty standard.you call te number in the manual and you can get it extended to 5 years if you wanted to.see that adds 3 years to your existing 2 year warranty.so yeah a 5 year warranty.snap on doesnt even offer that now do they?
@robby844 I can do the math just fine dipshit and now its call the number in the manual what happened to the number you claimed you gave me??
I did call IR I even posted the number for everyone else to call and see who is full of shit. Well guess what dipshit you have just had your ass handed to you once again.
Lets play some more robbie little boy you are a glutten for punishment LOL!
@HunterCO1 wow you are so retarded arent you little fagot? i said "you call the number in the manual and you can get it extended to 5 years if you wanted to".
and now you take that out of context and still say im full of shit? i was referring to piss brains like your immature self retard.grow the fuck up and admit you are a liar and were wrong.now sorry cunt but i have to go to beddy by cuz i live in real life and have a job.oh one more thing.how come you still live with mommy and daddy?
@robby844 WOW just WOW is right once again you made a claim now back it up little boy. Games up I ignored you for months and you just keep coming I had to ban your stupid ass from my account.
Little boy post the number for IR's magic 5 year warranty how hard is that???
Prove me wrong dipshit post the number so all can call and get a 5 year warranty how fucking hard is that you fucking idiot!
Let me guess you next post is you proved me wrong LMFAO your such a jackass!~
@HunterCO1 hahahh thats not even the number.back my mouth up how? you havent either on ANYTHING you said. i told you they give a 2 year warranty and offer a 5 year extended warranty.why is that so hard for you to understand? but i do have to laugh every time you say "robbie" it proves me right.oh and asshole grow up 40 year old fags dont type lmfao.
@HunterCO1 hahahh thats not even the number.back my mouth up how? you havent either on ANYTHING you said. i told you they give a 2 year warranty and offer a 5 year extended warranty.why is that so hard for you to understand? but i do have to laugh every time you say "robbie" it proves me right.oh and asshole grow up 40 year old fags dont type lmfao.
@HunterCO1 hahahh thats not even the number.back my mouth up how? you havent either on ANYTHING you said. i told you they give a 2 year warranty and offer a 5 year extended warranty.why is that so hard for you to understand? but i do have to laugh every time you say "robbie" it proves me right.oh and asshole grow up 40 year old fags dont type lmfao.
@HunterCO1 hahahh thats not even the number.back my mouth up how? you havent either on ANYTHING you said. i told you they give a 2 year warranty and offer a 5 year extended warranty.why is that so hard for you to understand? but i do have to laugh every time you say "robbie" it proves me right.oh and asshole grow up 40 year old fags dont type lmfao.
@HunterCO1 thats not even the number.back my mouth up how? you havent either on ANYTHING you said. i told you they give a 2 year warranty and offer a 5 year extended warranty.why is that so hard for you to understand? but i do have to laugh every time you say "robbie" it proves me right.oh and asshole grow up 40 year old fags dont type lmfao.
@HunterCO1 thats not even the number.back my mouth up how? you havent either on ANYTHING you said. i told you they give a 2 year warranty and offer a 5 year extended warranty.why is that so hard for you to understand? but i do have to laugh every time you say "robbie" it proves me right.oh and asshole grow up 40 year old fags dont type lmfao.
@robby844 little boy you never gave me a number much less anything else and I did call IR an for the final time they said your full of shit. Your post you have make proves your full of shit all it says is they give a warranty never does ift give a 5 year claim are you really that fucking stupid...LMFAO
@matcotoolguy68 rehehehhehehally now? you think all i know is snapdick.woooooooooow you are mistaken asshole.i have a full tool set dated from 1938 from west germany.made by wustoff.you got beta tools krupp tools din zein swis ibc koe .oh wait you dont know german tools do you?sorry dickweed
@matcotoolguy68 so true.i broke 3 of the same snapoff sockets while the douche on the truck was sitting there watching me take a head off a deutz diesel.he gave me a fourth socket and the breaker bar broke.i went over to my toolbox pulled out my craftsman breaker bar and socket and snapped the head off the bolt.
@tech31336 ive taken off 1 inch nuts torqued to over 375 with mine.the guy i work with had yea HAD a snap off.he burned his up trying to break the other lugs loose.
@robby844 The only thing you ever do is talk out your ass and make a complete fucking idiot of yourself. It is humorous so keep up the laughs I know me and many others laugh our asses off at every dumbass comment you make.
@robby844 you mean the tool box i posted and in one post you claim I never posted it. the next post you claim it was somebody elses box. the next post you have your head so far up your ass we cant even understand what your saying.
Is that the tool box your refering to the one that dont exist one post but does the next? Are you really that fucking stupid you cant even keep up with the posts you have made.....Never mind don't answer that you fucking jackass LMFAO!
@HunterCO1 was that the box that you said was 150? now you said tool box was worth 150k not the tools in it.and the same vid at the end a guy comes over towards you? the same vid that so shitty we cant tell if its a box or your moms ass? that one? that vid? the one of somebody elses box? why didnt you open it and show your tools like you said you were going to? maybe since it wasnt your box you couldnt do that.
You're a moron...,,
AngeloR674 2 weeks ago
this is not the best video to represent IR
02915a 1 month ago
nice pattern.
stonedvideos1 2 months ago
sounds slow off the draw. Keep practicing.
ForDoverUSA 2 months ago
snap on better
96derricktf 3 months ago
So when does the demonstration start?
lee3r24 3 months ago
Drive shaft nuts on front-wheel-drive cars are typically torqued up to 300 foot pounds. If threadlock or rust has sealed the joint, the torque to undo it will be a lot more. Will this tool do it or is it still a case of having to stand on a 3/4" drive breaker bar? (I've already broken one or two one-nut-wonder electric wrenches) To be honest some of these tools are only suitable for lug nuts on compact cars and 150 foot pounds is their absolute limit (if you are lucky)
techdavey1000 3 months ago
how dumb... i could do that a 12 volt cordless drill. try a 11/2" nut torqued to about 600 ft pounds.
jackle842000 3 months ago
what a way to demonstrate nothing - my dewalt does that same thing as far as putting on and off lugs nuts - stupid ass demo
flyinasscritter 3 months ago
WTF is this? Look how fast it sounds. look how fast I can CRAM it onto these lug nuts.
mickblock 3 months ago
why is this guy so trigger happy compare that to air impact that's a good brand air whip is ass
12344richard 3 months ago
What kind of goofy, doped-up, dumbass, made this video? IR are you kidding????
TommyMacDaddy1 4 months ago
they make this gun for snap-on!!
TheBlazen001 4 months ago
il put my snap-on cordless impact up aginst that pos
backwoodsctryboy 5 months ago
Use it on a skidmore torque tester for a real test
bob3104558 5 months ago
That might be the worst demonstration I have ever seen. Thank you for making me appreciate my snap on. Not impressed to see lugnuts come off and on amateur
ssmokedz 5 months ago
Hmmm dont all impact driver do that????????????
APSPROP 5 months ago
dude lay off the coke, and the fucking trigger.
Bmwood121 6 months ago
snap kills that sum bitch. leaves in the dust by far
TheDillonwadej 7 months ago
This guy is just being an asshole
disnukka79 8 months ago
It is an impressive tool you video just sucks
meka11113 8 months ago
NASCAR better get this guy in the PITS! hahahahhaahha
GeneralF34R 8 months ago
well that proved nothing....
dontwobble 8 months ago
silly man.. doesn't be know to always tighten opposites .....
Goolyfer 8 months ago 2
okay hassan ahmed woof woof
TheMsautobodyman 9 months ago
HEY JOHNNY FIVE, I FOUND YOU A WIFE!
rono8582 9 months ago
can u say get a snap on
kpath74 9 months ago
Looked like a complete fag when he was flailing around in the open air at the beginning.
Muffduster 9 months ago 4
great gun, ive had one for about 2years and i use it more than my air gun. never has failed on me
elramirez6 10 months ago
What a waste of time that was!
meka11113 10 months ago
@meka11113 If you owned one, you'd understand. Its not a waste of time... not one bit. It really is an impressive impact.
MrTech190 9 months ago
Comment removed
DAC31336 10 months ago
Rev Master strikes again.....
LRGHMN 10 months ago
Ingersoll Rand is great. They are high priced but great. I bought the craftsman 1/2 in drive inpact that runs on a 19.2v c3 battery. The pack charges in 1 hr. So far I have adjusted 1 of my dirt bikes rear tires several times rotated tires on my truck and gf's car changed Lmower blade torn dorn my YZ engine and havent changed the battery or had a loss in power. It seems to be better deal for the money.
jc250f 10 months ago
@jc250f As the saying goes, you get what you pay for. Every penny is worth it for this gun. Hands down.
MrTech190 9 months ago
Obviously not a mechanic judging by the circular lug tightening. The star pattern becomes habit pretty quickly...
X9xATIx7X 10 months ago 2
That was awesome! In your next video can you twirl some nunchucks?
YouStupidBunnies 11 months ago 3
Twat
mut7265 11 months ago 2
ingersoll is good but this video is stupid
Aholt454SS 11 months ago
the brand i WONT FUKIN BE BUYING..THNAXZ
migyard 11 months ago
Wow - I've never see someone make an impact wrench look as gay as you do.
GeorgeGraves 11 months ago 2
they defnitely seem like the go to company for air tools but i dont know about cordless impacts
reap62 1 year ago
this guy looks like he has add
crazyforcrcars 1 year ago
Robby844 @ HunterC01
HunterC01 @ Robby844
Robby844 @ HunterC01
HunterC01 @ Robby844
Bla, Bla, Bla, Bla, Bla,
You guys should share your phone numbers!
How about the Milwaukee 2662-20 M18 with 450 foot-pounds of torque? Is this a good one?
831sabino 1 year ago
@831sabino HEY... THAT SOUNDS GREAT
addvanced 1 year ago
how about Hunter Robby and any other girls request each other on facebook and message each other on there own time instead of wasting my time reading your stupid shit while trying to take in info about this impact. Nobody gives a fuck, what is this drama queen central? Why must people make corny videos and over exaggerate the no load part? Snap on clearly will overtake anything else when it comes to tools. I have never seen a tool take so much stress in my life as a snap on
sierra2500pk 1 year ago
im impressed
meiermotorsports 1 year ago
thnaks to you and your fucking useless video youve just put me right off buying one of these.
thanxx 1 year ago
TWAT...!
officersnout 1 year ago
Jackass,
elkaife 1 year ago
How is that any indication of how well it works? Stick that thing on a rusty exhaust flange and I'll watch.
mickblock 1 year ago 61
@mickblock They aren't saying how well it works. They are stating its the best impact wrench out there. I have owned a 2135Ti model and it was a beast. Never gave me any problems, is light and tons of power (air driven). If either of those were to go against rusty exhaust bolts, it would just snap them off under the guns amount of torque.
MrTech190 9 months ago
Does this guy talk?
kevykev38 1 year ago
Looked kind of silly when he was driving it in the air like that.
HassanAhmedAbou12 1 year ago 37
@HassanAhmedAbou12 yeah i know.dont know why he was doing that
robby844 1 year ago
@HassanAhmedAbou12 the kick shows the torque response very well
addvanced 1 year ago
@addvanced YEAH WELL...you cant show any torque responce by free handling a the torque wrench like he did..A 10 volt impact driver could show the same kick as that thing..
migyard 11 months ago
This has been flagged as spam show
hahahh thats not even the number.back my mouth up how? you havent either on ANYTHING you said. i told you they give a 2 year warranty and offer a 5 year extended warranty.why is that so hard for you to understand? but i do have to laugh every time you say "robbie" it proves me right.oh and asshole grow up 40 year old fags dont type lmfao.
robby844 1 year ago
now people please tell me where it says ir does not offer a 5 year extended warranty on the warranty post to mister hunter.
robby844 1 year ago
@robby844 There you go again little boy LMFAO can your read what you post simply says they have a warranty nothing in anythging you have ever posted says 5 years are you really that fucking supid LMFAO!!!!
HunterCO1 1 year ago
robbie and mactco your not very good at playing two people at once you both posting from the same IP addy do you suck each others dick also or are you the same person?
HunterCO1 1 year ago
@HunterCO1 really so you ran our ip's with out "are" consent? you know that jailtime right? well we know you love big dicks since your riding one right now.
robby844 1 year ago
Comment removed
matcotoolguy68 1 year ago
This has been flagged as spam show
@HunterCO1 is that the best you can come up with mr snapon?
matcotoolguy68 1 year ago
@HunterCO1 is that the best you can come up with mr snapon , if it is i am going to bed , your ass got handed to you tonight hoss
matcotoolguy68 1 year ago
@matcotoolguy68 robbie little boy since when have you ever handed anybody there ass LMFAO!
HunterCO1 1 year ago
@HunterCO1 ohh gees man, your speaking to the wrong dude
matcotoolguy68 1 year ago
@matcotoolguy68 i am going to bed, you must be tried your not a challange to me tonight, you just go in circles , repeating yourself. over and over .
matcotoolguy68 1 year ago
@matcotoolguy68 not according to an IP trace try again robbie child your a fucking idiot now how about you get over the fact your a fucking moron and really just proved that. You needed to create another account so you could play two people to pretened you could compete on youtube.
My advise is to go eat a bag of shiit moron!
HunterCO1 1 year ago
@HunterCO1 whatever mrsnapon youre full of it
matcotoolguy68 1 year ago
i dont know what to think about you hunter. i wish you luck in life. big tools and a big box. ,i know you wouldnt want to but if you sold it all today what do you think you would get out of your snapon empire?
matcotoolguy68 1 year ago
@matcotoolguy68 its not his he doesnt own any of what he shot in the vid
robby844 1 year ago
@matcotoolguy68 nothing to think about I do it for a living if you have something to offer I will buy it what more is there to think..
'What do you think my matco empire woud be worth had I went that route???
Thats a really stupid question dont ya think? You and robbie realted by chance?
HunterCO1 1 year ago
@HunterCO1 the point is you got took and dont even knowit . you wear that s on your chest which dont even matter anymore in the tool world anymore.tool companies are making snap, mac,cornwell and matco look like fools.putting out a product that other companies make for them . if you dont think they do , i can pick a snap on catalog apart along with mac and matco and cornwell . yeah the do make rachets and sockets but thats about it
matcotoolguy68 1 year ago
@matcotoolguy68 yeah he claims that snapoff is 100% us made.its not.they ship wrenches in from china and put them in the press and have usa stamped in them.hes just hurt cuz he lied.
robby844 1 year ago
@robby844 i dont think he lied he just doesnt understand the tool market,if hes never been anyting other than snapoff( aka mary kay )he wouldnt know. they do pretend that they have 100 percent usa tools. i agree
matcotoolguy68 1 year ago
@matcotoolguy68 lol yeah.all of the electronics are made in china just slapped with a us tag.if not they look odd looking like gook tools from other companies
robby844 1 year ago
@robby844 id like to know who makes that cordless impact for them .whoever did .they did do a pretty good job
matcotoolguy68 1 year ago
@robby844 how much crack did you smoke to day little boy LMFAO is that the best you can do once again talk out your ass?
I will make it real simple prove what you just said!!!!!!!
HunterCO1 1 year ago
This has been flagged as spam show
@HunterCO1 and what did i just say? hahaha funny you sit there you know the truth you are just too big of a pussy to admit it.
robby844 1 year ago
@matcotoolguy68 dipshit you all sell certain tools made by (let me help you jackass) lisle, kd, otc, kent more ect. I am talking about the tools each company actually makes.
Nobody on the face of the planet earth can touch snap-on hand tools they have the best tool steel ever hands down.
matco dealer is coming with some cordless stuff if it is what he says and i will put it up against snap on then I will buy it.
HunterCO1 1 year ago
@HunterCO1 i used the matco cordless 1/2 inch, slow speed but more power than snappy
matcotoolguy68 1 year ago
@matcotoolguy68 Really so what seperates them expalin to the class what makes matco better!
HunterCO1 1 year ago
@HunterCO1 dumbass thats just a screen name i could careless about matco either, i cant bust a grey socket or a sunex socket, but i can split a snapon down the middle,explain that one
matcotoolguy68 1 year ago
@matcotoolguy68 dipshit nice cop out you must have learned that from robbie he always does that when he gets cornered with his stupidity.
I asked you a very siimple question what serperates matco from snap on its not a very hard answer if you do it for a living intstead of run your pie hole on youtube.
HunterCO1 1 year ago
@HunterCO1 armstong makes matco hard for them they dont make anything, its good stuff but armstrong makes it.
matcotoolguy68 1 year ago
@matcotoolguy68 hardline sorry
matcotoolguy68 1 year ago
@matcotoolguy68 nope dumbfuck danher makes matco hand tools and they also make craftsmen toos since 1994 arent you a fucking idiot now. LMFAO
HunterCO1 1 year ago
@HunterCO1 dumbass danher owns the armstrong companty along with gearwrench , kd matco,etc etc, danher is the name of the corparation.listen to me and youll learn
matcotoolguy68 1 year ago
@matcotoolguy68 sad thing is man he doesnt listen.hell eh cant even read
robby844 1 year ago
@HunterCO1 cunter oh cunter im still waiting for you to back up that lie you told about a CAT vid that i commented on
robby844 1 year ago
@robby844 Little boy that was settled back then go back to that video and comment are you really that fucking retarded!
HunterCO1 1 year ago
@HunterCO1 your the one that brought it up! why should i go back and prove you wrong?
robby844 1 year ago
@robby844 i like fussing with hunter but hes no match for someone with real tool knowledge, all he knows is snapdick.
matcotoolguy68 1 year ago
@matcotoolguy68 you like me to make an ass of you since you and robbie are complete dipshits and you never did answer my question why matco is better?
You gave a typical robbie dipshit response you avoided the question.
So why is matco better lets her an intelligent response...Youtube is waiting
HunterCO1 1 year ago
@HunterCO1 one its not snapon. two is cheaper. three has the same warranty four i like better,not my favrorite but better to me. now answer my question why have i had grey china sockets that never bust and i can split a snapon down the middle? and yes the snapon is a impact sockets??????????? , dont worry about ass out of me hoss i can sit here all night if i want to
matcotoolguy68 1 year ago
@matcotoolguy68 wrong dumbfuck its not cheaper its more expensive. You just proved your a fucking idiot. oh and little boy I can sit here all night also so if you want me to make a complete fucking idiot of you some more let me know.
HunterCO1 1 year ago
@HunterCO1 what since when? matco is cheaper than snapoff any day.you need to go back to school dipshit.
robby844 1 year ago
@robby844 dumbfuck you already admited you dont have any tools much less you would not know the value or what they cost so why are you commenting you complete jackass??
HunterCO1 1 year ago
Comment removed
robby844 1 year ago
@robby844 little boy we dont care about your nazi dildos we want to see some tools so why dont you make a video of your tools??
HunterCO1 1 year ago
@HunterCO1 i dont have too.i never made a claim like you did retard.
robby844 1 year ago
@robby844 yes you did little boy you said IR is better than snap on now back your mouth up!
HunterCO1 1 year ago
@HunterCO1 wow any retard knows that dipshit.wow cunter you sure are retarded.how can it be the same ip when we are 3000 miles apart?
robby844 1 year ago
This has been flagged as spam show
@robby844 simple he knows he cant back up any of the shit he throws out,
matcotoolguy68 1 year ago
@robby844 dumdfuck you tell everyone on youtube how that could be since your a too expert that has never owned any tools.
HunterCO1 1 year ago
@robby844 see you robby nice talking at you ,its been fun,hunter grow up and you might make it in the real world, and i hope i learned you a lesson tonight , dont let you mouth write a check your ass cant cash
matcotoolguy68 1 year ago
@matcotoolguy68 yep I learned my lesson its fun to fuck with retards and thanks for playing!
HunterCO1 1 year ago
@HunterCO1 whatever you think, just scoll down , and look how many times you showed that you really dont know anything about tools . goodnight
matcotoolguy68 1 year ago
@matcotoolguy68 tell your snapoff dealer to sale you some common sense. it wont come cheap , but damn you need it that bad
matcotoolguy68 1 year ago
@HunterCO1 well hunter the real mechanics have to go to bed since we have real jobs.been nice playing today
robby844 1 year ago
Comment removed
HunterCO1 1 year ago
@robby844 Little boy while you were talking to your self I was in bed since I had to work. So tell everyone how a real mechanic such as yourself works with no tools and you have admitted you don't have?
Never mind just humor me with more of your fucking stupidity It brightens my day that someobody as fucking stupid as you can still remember to keep breathing LOL!!!!!!!!!!!!!!
HunterCO1 1 year ago
@HunterCO1 so by saying "i dont claim to own any tools" you think i dont own any because i said that? and you werent in bed you were too big of a pussy to reply. how do i know? i replied 22 seconds after you replied to me.
robby844 1 year ago
@robby844 little boy I am only going off what you have proven and said not much more I can do on youtube. If you want to prove me wrong feel free and not the typical robbie jackass post of "I proved you wrong" wont work you will actually have to back your mouth up.
Let mje know when your ready!
HunterCO1 1 year ago
@HunterCO1 back my mouth up on what i have claimed nothing.im not a pussy like you.and cunter its robby not robbie.oh wait i forgot you dont know how to read.
robby844 1 year ago
@robby844 yep your right you have not claimed anything or ever backed you mouth up so whats new I see the people on youtube have not missed anything except for you doing what you do best makeing an ass of yourself LOL!!
HunterCO1 1 year ago
@HunterCO1 "makeing" an ass out of myself? how is that? i have done nothing to be "makeing" an ass out of myself.but you on the other comment on every damn vid and claim you know every damn thing but in reality you know NOTHING
robby844 1 year ago
@robby844 well little boy yes you have made an ass out of yourself you see it is up to you to back your mouth up and as of yet you have not done that!
HunterCO1 1 year ago
@HunterCO1 back it up to what? i have nothing to prove.you keep telling me that over and over and over but yet i have posted NOTHING i need to prove other than my point that your a FUCKtard and cant read.and i dont have to prove that since you do it for me with every comment you post
robby844 1 year ago
@robby844 littleboy keep digging you just proved my point you always back out and make an ass of your self for once just stand up to a question and answer it. I know its easy to make an ass of yourself but youtube is getting tired of your busllshit!!! LOL more fun with robby this child is the laugh of a life time it never ends!!
HunterCO1 1 year ago
@HunterCO1 back out of what? i have no reason to post anything. you just keep telling me that im a little boy and i lie.prove to me that i lie. that simple tell me what i have to prove myself about.
robby844 1 year ago
@robby844 little boy stop makeing excuses thats all you do if somebodey asks you to make a point you claim you dont need too. If somebody asks you to prove anuything you have said once again you claim you dont need too............Well guess what little boy in real life you must back your mouth up and so far you are the youbube king of makeing a fucking ass of your self.
Not once ever have you backed anything you have ever said up.
Little boy lets play some more. I am haveing fun...LOL
HunterCO1 1 year ago
@HunterCO1 i have backed up everything i have said with both pms to you and posts in the comment section.ok heres ir's warranty lets go over this AGAIN next post will be the policy
robby844 1 year ago
@HunterCO1 By choosing an Ingersoll Rand product, you have selected a well-crafted, highly engineered product from a company with over 125 years of experience in the industry.
To demonstrate our confidence, every piece of Ingersoll Rand equipment is backed by a full warranty. For warranty specifics, availability and details, please contact your local Ingersoll Rand authorized service provider.
uh oh proved you wrong AGAIN
robby844 1 year ago
@robby844 how would you know you have clearly stated you don't own a toolbox nor do you have any tools you fucking moron.
Also you never showed where IR gives your mythical 5 year warranty as it don't exist remember little boy I called them and they said your full of shit.
Keep it coming little boy you like a plastic fuck doll cheap and entertaining.
HunterCO1 1 year ago
@HunterCO1 asshole i never said i didnt own a toolbox.i do own a toolbox but its not like your buddies that you posted.lol you keep saying you called but my superiors say nobody called.i find you amusing that you have an excuse for every thing but yet you know nothing.you also made a claim on another vid that ir didnt make a air gun that put out over 80k torque.which we know you were full of shit for claiming that
robby844 1 year ago
@robby844 jackass stop makeing a fucking idiot of your self and post the facts. I gave you the number I called in another video and once again please post the 5 year warranty that does not exitst.
I will keep makeing you look like a fucking idiot if you wish I will never stop so just give it up already.
HunterCO1 1 year ago
@HunterCO1 you never ever posted any numbers.i gave you the number to call i gave you my warranty info i gave you my employee number.im not "makeing" myself look like anything.you are the "little boy" thats thinks he owns a tool box worth 150k and you dont have shit.if it was your box then why did it take you 3 weeks to post the vid? you still havent proved me wrong about the warranty thing and you never will
robby844 1 year ago
@robby844 I asked a simple question you fucking idiot post the 5 year waranty you makde the thye claim now back it it up or shut the fuck up already do you really love for me to make you look like a fucking idiot LMFAO!!!
HunterCO1 1 year ago
@HunterCO1 hahahah not only does it prove me wrong but it proves you wrong as well.you can contact ir after you buy your tool and get an extended warranty.and yes i posted the direct number to the warranty center 7 times and sent you the number in pm's more than that.its not my fault you are a retard and cant pick up a phone and call a damn number.and im still waiting on your comment about the matco ratchet.i wanna hear it.
robby844 1 year ago
@robby844 back to the same ol bullshit robbie cant back his mouth up. LMFAO
Since robbie will not back his mouth up you all feel free to call IR they give a two year warranty. Robbie never gave a number my advice is to call them your self as all robibe will do is claim he proved you wrong on youtube!
If you feel the need to contact IR (800)392-5728 Ext. 3
feel free and of course ask them if they know robbie I am sure they will LMFAO....
my guess is he is the janitor
HunterCO1 1 year ago
@HunterCO1 hahahh thats not even the number.back my mouth up how? you havent either on ANYTHING you said. i told you they give a 2 year warranty and offer a 5 year extended warranty.why is that so hard for you to understand? but i do have to laugh every time you say "robbie" it proves me right.oh and asshole grow up 40 year old fags dont type lmfao.
robby844 1 year ago
@robby844 hahah ok are you twelve years old give the number then jackass. That is the number that IR's website gives sorry it dont work for you so give the number you claim you gave me!!
Oh and little boy I called them its a 2 year warranty not 5 but hey why not for once in you life give the secret number for everyone to call.
This 40 year old fag has called you out not back you mouth up jackass!!
HunterCO1 1 year ago
This has been flagged as spam show
@HunterCO1 oh im sorry cunter see i had something grownups like me call a job to go to.so sorry i didnt reply to your baby ass last night.see thats the number the website gives not the one i told you to call.oh but i like this line. "called you out not back you mouth up jackass!!" that just proves my point doesnt it. but thats not as grteat as "i dont own a dime of any of it" cant beat that one eh?
robby844 1 year ago
@HunterCO1 ok cunter let me do the simple math for you since you are too retarded to understand.the tool comes with a 2 year warranty standard.you call te number in the manual and you can get it extended to 5 years if you wanted to.see that adds 3 years to your existing 2 year warranty.so yeah a 5 year warranty.snap on doesnt even offer that now do they?
robby844 1 year ago
@robby844 I can do the math just fine dipshit and now its call the number in the manual what happened to the number you claimed you gave me??
I did call IR I even posted the number for everyone else to call and see who is full of shit. Well guess what dipshit you have just had your ass handed to you once again.
Lets play some more robbie little boy you are a glutten for punishment LOL!
HunterCO1 1 year ago
@HunterCO1 wow you are so retarded arent you little fagot? i said "you call the number in the manual and you can get it extended to 5 years if you wanted to".
and now you take that out of context and still say im full of shit? i was referring to piss brains like your immature self retard.grow the fuck up and admit you are a liar and were wrong.now sorry cunt but i have to go to beddy by cuz i live in real life and have a job.oh one more thing.how come you still live with mommy and daddy?
robby844 1 year ago
@robby844 dipshit post the number in the manual.......Then expleanin to the class why they only give a 2 year warranty.
Once again little boy your like playing with a plastic fuck doll your so fucking sutpid words can not even say
playing with robbie is like a walk in the park he talks out his ass and never backs it up.
HunterCO
HunterCO1 1 year ago
@HunterCO1 wow just wow. im the dumb one but yet you are the retard the refuses to admit youre wrong.just give up like your mom gave up on you
robby844 1 year ago
@robby844 WOW just WOW is right once again you made a claim now back it up little boy. Games up I ignored you for months and you just keep coming I had to ban your stupid ass from my account.
Little boy post the number for IR's magic 5 year warranty how hard is that???
Prove me wrong dipshit post the number so all can call and get a 5 year warranty how fucking hard is that you fucking idiot!
Let me guess you next post is you proved me wrong LMFAO your such a jackass!~
HunterCO1 1 year ago
Comment removed
HunterCO1 1 year ago
This has been flagged as spam show
@HunterCO1 hahahh thats not even the number.back my mouth up how? you havent either on ANYTHING you said. i told you they give a 2 year warranty and offer a 5 year extended warranty.why is that so hard for you to understand? but i do have to laugh every time you say "robbie" it proves me right.oh and asshole grow up 40 year old fags dont type lmfao.
robby844 1 year ago
This has been flagged as spam show
@HunterCO1 hahahh thats not even the number.back my mouth up how? you havent either on ANYTHING you said. i told you they give a 2 year warranty and offer a 5 year extended warranty.why is that so hard for you to understand? but i do have to laugh every time you say "robbie" it proves me right.oh and asshole grow up 40 year old fags dont type lmfao.
robby844 1 year ago
This has been flagged as spam show
@HunterCO1 hahahh thats not even the number.back my mouth up how? you havent either on ANYTHING you said. i told you they give a 2 year warranty and offer a 5 year extended warranty.why is that so hard for you to understand? but i do have to laugh every time you say "robbie" it proves me right.oh and asshole grow up 40 year old fags dont type lmfao.
robby844 1 year ago
This has been flagged as spam show
@HunterCO1 hahahh thats not even the number.back my mouth up how? you havent either on ANYTHING you said. i told you they give a 2 year warranty and offer a 5 year extended warranty.why is that so hard for you to understand? but i do have to laugh every time you say "robbie" it proves me right.oh and asshole grow up 40 year old fags dont type lmfao.
robby844 1 year ago
This has been flagged as spam show
@HunterCO1 thats not even the number.back my mouth up how? you havent either on ANYTHING you said. i told you they give a 2 year warranty and offer a 5 year extended warranty.why is that so hard for you to understand? but i do have to laugh every time you say "robbie" it proves me right.oh and asshole grow up 40 year old fags dont type lmfao.
robby844 1 year ago
This has been flagged as spam show
@HunterCO1 thats not even the number.back my mouth up how? you havent either on ANYTHING you said. i told you they give a 2 year warranty and offer a 5 year extended warranty.why is that so hard for you to understand? but i do have to laugh every time you say "robbie" it proves me right.oh and asshole grow up 40 year old fags dont type lmfao.
robby844 1 year ago
@robby844 little boy you never gave me a number much less anything else and I did call IR an for the final time they said your full of shit. Your post you have make proves your full of shit all it says is they give a warranty never does ift give a 5 year claim are you really that fucking stupid...LMFAO
HunterCO1 1 year ago
@matcotoolguy68 yeah he just keeps on talking.btw id buy matco anyday.
robby844 1 year ago
@robby844 ohh dude dont speak about this , he will just cuss cause he doest have clue about what the nazi movement was ,youll confuse him
matcotoolguy68 1 year ago
This has been flagged as spam show
@matcotoolguy68 see what i mean
matcotoolguy68 1 year ago
@matcotoolguy68 haahha so true man.
robby844 1 year ago
This has been flagged as spam show
@matcotoolguy68 is that the best you can come up with mr snapdick?
matcotoolguy68 1 year ago
@HunterCO1 go for it ,i am waiting,you wont even aswer me about the grey question,you avoid it because you dont know do you mr snapon?
matcotoolguy68 1 year ago
@HunterCO1 btw asshole he told you SEVERAL times.you just proved YET AGAIN -sigh shakes head- that you CANT FUCKING READ
robby844 1 year ago
@matcotoolguy68 rehehehhehehally now? you think all i know is snapdick.woooooooooow you are mistaken asshole.i have a full tool set dated from 1938 from west germany.made by wustoff.you got beta tools krupp tools din zein swis ibc koe .oh wait you dont know german tools do you?sorry dickweed
robby844 1 year ago
@HunterCO1 umm dick face matco is better that snapoff any day.hands down.and its robby dickwad.
robby844 1 year ago
@robby844 another gret post by a retard with no facts but guess what the next post he will claim he poved me worng. LMFAO
HunterCO1 1 year ago
@HunterCO1 i cant even read what this says.wtf is he saying? you want fact? you are the biggest dick head in the history of youtube.
robby844 1 year ago
@matcotoolguy68 so true.i broke 3 of the same snapoff sockets while the douche on the truck was sitting there watching me take a head off a deutz diesel.he gave me a fourth socket and the breaker bar broke.i went over to my toolbox pulled out my craftsman breaker bar and socket and snapped the head off the bolt.
robby844 1 year ago
@robby844 grey is better socket by far, they never break and count on them
matcotoolguy68 1 year ago
@matcotoolguy68 yup i believe it too.
robby844 1 year ago
@HunterCO1 dont give me a bunch of shit about american steel,hell i think snapon getting it where craftman get theirs, arnt they american made also?
matcotoolguy68 1 year ago
@matcotoolguy68 nice cop out once again robby are you a glutten for punishment?
HunterCO1 1 year ago
@HunterCO1 reaaly like what?
matcotoolguy68 1 year ago
@HunterCO1 cunter it is cunter right? the why do snapoffs break before my craftsman tools? i think you need mental help there bud
robby844 1 year ago
Comment removed
robby844 1 year ago
Wrong bolting pattern dumbass.
Sr20d3t 1 year ago
Snap-on 18 V.CT6850 has 620 ft/lbs breakaway torque and 400 ft.lbs output torque. Is this the 19.2 V IRW360 that puts out 360 ft. lbs of Max torque?
tech31336 1 year ago
@tech31336 ive taken off 1 inch nuts torqued to over 375 with mine.the guy i work with had yea HAD a snap off.he burned his up trying to break the other lugs loose.
robby844 1 year ago
@robby844 The only thing you ever do is talk out your ass and make a complete fucking idiot of yourself. It is humorous so keep up the laughs I know me and many others laugh our asses off at every dumbass comment you make.
HunterCO1 1 year ago
@HunterCO1 really cuz it seems its the other way around. were still waiting for a vid of your $150000 tool box
robby844 1 year ago
@robby844 you mean the tool box i posted and in one post you claim I never posted it. the next post you claim it was somebody elses box. the next post you have your head so far up your ass we cant even understand what your saying.
Is that the tool box your refering to the one that dont exist one post but does the next? Are you really that fucking stupid you cant even keep up with the posts you have made.....Never mind don't answer that you fucking jackass LMFAO!
HunterCO1 1 year ago
@HunterCO1 was that the box that you said was 150? now you said tool box was worth 150k not the tools in it.and the same vid at the end a guy comes over towards you? the same vid that so shitty we cant tell if its a box or your moms ass? that one? that vid? the one of somebody elses box? why didnt you open it and show your tools like you said you were going to? maybe since it wasnt your box you couldnt do that.
robby844 1 year ago