I have a problem. My laptop (a Compaq Netbook) for some reason will not go up to 1024 by 768 for some reason. Can you help me with this problem at all.
@godofcrap42 With Windows, anytime you cannot get the resolution that a monitor was designed for it is typically because the correct driver is not installed for the video card.
My moniter resolution was changed. After that my moniter is showing an error "input signal out of Range change settings to 1024x768-60Hz".
How do I change it back to default? There is only a black screen on moniter so I can't get to the desktop to click properties to change the resolution back to the suggested setting.
hi, have a question? My Screen Resolution is Pink can't take out the red out .. tried everything .what can i do to restore it back to it natural color?
@yolanda1161 You may have a bad connection or loose pin in a cable, could have bad video card or could have bad monitor.
Check connections, then swap out monitor if possible and try on another PC. If the problem goes with the monitor then the monitor is bad. If the problem stays with the PC then it's the video card.
i have a question, when i record something on my pc (full screen capture setting), the result just come with like 2/3 portion of my screen (which suppose to be full screen), the part of top right, bottom left, bottom right of the video is blank..
@FreeCompConsultant i downloaded sanandreas game, when i attempt to open it, it says you need 800x600x32, i'm well aware what this means? what do i do in that case...
@Wackey2k9 If you have the right driver installed, you should be able to choose whatever resolution is supported by your monitor. If the game requires the resolution to be NO MORE THAN 800x600x32, then you will have to set the resolution down to that to play the game - but no RECENT games would require you to do that, only very old ones.
@MasterOfGmodMichael If you have the correct video drivers loaded and the correct driver for your monitor - what you see is what your choices are. Either your monitor or video card do not support anything higher.
My original resolution was 1280 x 800. But I went to this NVIDIA Control Panel, chose a custom resolution of 1280 x 1040 and applied settings. Then boom, my screen was so clear!
@android059 Make sure that windows sees it as a 941bw and not just a plug n play monitor and that your video card is seen as the model it is and not a generic driver.
Also, your video card must be capable of that resolution
Help please. I want to get 1024x768 resolution because i have an application and its very important it won't work in my laptop which is 1024x600 in size. Can you give a site or help me to download this resolution? Please.
@FreeCompConsultant hey can help me? My father have 640x400 and 4 bit... when i try to make 1024x768 it change back to 640x400( I downloaded a Nvidia Update for my father PC ) PLZZZ HELP MEE !!!!
@bbbbaaaa122 I would suspect if you look in device manager, the updated driver is not installed. Either it's not the correct driver or perhaps you need to uninstall the driver, reboot and reinstall the driver.
@lazer46 It sounds like your video driver needs updating. When you go to the device manager, do you have a yellow exclamation mark next to the video/display icon?
hello my friend, i have the same problem, my resolution is stuck at 640x480, and I cant connect to the internet because the resolution is too low even for the software from my dsl, my pc is a dell dimension 8110 desk top, running windows xp. You seem to know a lot about pcs, please help me...
Hi, if your resolution is stuck at 640x480, it sounds like you have the wrong video driver on your PC. If you open up Device Manager on your PC, do you have a yellow exclamation mark next to the display property?
thanks snippets, I see the exclamation point next to other devices, under that I have video controller (vga compatible) with the exclamation point too, among others, is that the one..?
It sounds like you've just set your resolution too high. The higher the resolution allows more pixels to be used in the same amount of screen space. If you're having trouble reading the screen contents, adjust the screen resolution again to a lower value.
Hi, if you're referring to the yellow circle at the end of the mouse pointer. It is part of the software used to record the computer screen. The software is called Camtasia Studio.
I used my computer to show videos on videoprojector. After that my computer resolution is blurry. How could I fix that? Or why is that so? The resolution is set as it was before, but it is blurry...
lol dude my maximum resoulution is 2048 by 1536 pixles my graphics is ATI Radeon xpress 200M and im useing a laptop and it wasnt suppose to be.... well i like it like that
hi i have a question say my laptop was a foot my just an example it would start the right side of the screen on the 2nd inch and ends on the 10th inch on the sides it is black wat do i do
i played a game called combat arms and when i turned it off, the screen ended up being huge as if it was on 800x600 but when i checked it was on 1024x768. can u help me plz??
Why is it my Laptop will not change and show more it bothers me that it does not make much room and do you know how to Fix it so my Internet is not So close up
Hi I Need your help i went to the properties and settings but the slider your are talking about the slider that changes the resloution my slider stays on the last and when i drag it it wont go any further it stays the and color quality stays lowest please help me!!!
i got a question i needed to do some vista download or something and when i did it my resolution got all screwed up and i did what u did and i tryed all of the resolutions thye have and none of them worked can you please help
THANKS FOR THE BIG HELP!!!
soyautista 2 days ago
I have a problem. My laptop (a Compaq Netbook) for some reason will not go up to 1024 by 768 for some reason. Can you help me with this problem at all.
godofcrap42 1 month ago
@godofcrap42 With Windows, anytime you cannot get the resolution that a monitor was designed for it is typically because the correct driver is not installed for the video card.
FreeCompConsultant 1 month ago
Hey...
My moniter resolution was changed. After that my moniter is showing an error "input signal out of Range change settings to 1024x768-60Hz".
How do I change it back to default? There is only a black screen on moniter so I can't get to the desktop to click properties to change the resolution back to the suggested setting.
Operating system : XP
Please help...
Thanks
Faiithangel 9 months ago
I have an hp laptop and I can't go past 1024x768. :(
DocterLOLer 9 months ago
hi, have a question? My Screen Resolution is Pink can't take out the red out .. tried everything .what can i do to restore it back to it natural color?
yolanda1161 10 months ago
@yolanda1161 You may have a bad connection or loose pin in a cable, could have bad video card or could have bad monitor.
Check connections, then swap out monitor if possible and try on another PC. If the problem goes with the monitor then the monitor is bad. If the problem stays with the PC then it's the video card.
FreeCompConsultant 10 months ago
hi..
i have a question, when i record something on my pc (full screen capture setting), the result just come with like 2/3 portion of my screen (which suppose to be full screen), the part of top right, bottom left, bottom right of the video is blank..
how to fix that?? please help me.. :(
Lamborghini210490 10 months ago
@Lamborghini210490 That's more an issue with your screen capture software and that capabilities that it does or does not have.
FreeCompConsultant 10 months ago
i can't move my Slider, its still on 1. :'( SOME
Wackey2k9 10 months ago
@Wackey2k9 Then you may not have the correct driver loaded for your video card
FreeCompConsultant 10 months ago
@FreeCompConsultant can i download it? PLZ
Wackey2k9 10 months ago
@Wackey2k9 Usually, yes, from the manufacturer's website.
FreeCompConsultant 10 months ago
@FreeCompConsultant whos my manufacterter, is that microsoft, or Compaq?
Wackey2k9 10 months ago
@Wackey2k9 If your computer is a Compaq computer, then go to their website.
FreeCompConsultant 10 months ago
@FreeCompConsultant i downloaded sanandreas game, when i attempt to open it, it says you need 800x600x32, i'm well aware what this means? what do i do in that case...
Wackey2k9 10 months ago
@Wackey2k9 If you have the right driver installed, you should be able to choose whatever resolution is supported by your monitor. If the game requires the resolution to be NO MORE THAN 800x600x32, then you will have to set the resolution down to that to play the game - but no RECENT games would require you to do that, only very old ones.
FreeCompConsultant 10 months ago
thank you very much!!!!!!!!!!!! the screen was way too big to do anything but thanks a lot! now its all better!
luchomame1 11 months ago
ummmm i want to know how to get it bigger then the highest one
MasterOfGmodMichael 1 year ago
@MasterOfGmodMichael If you have the correct video drivers loaded and the correct driver for your monitor - what you see is what your choices are. Either your monitor or video card do not support anything higher.
FreeCompConsultant 1 year ago
@FreeCompConsultant i only have one drive thing do you know how to install it correctly
MasterOfGmodMichael 1 year ago
please respond ASAP i only have 1 setting (649x480) with medium color qualaty (16 bit) and i just reformated my tower. do you know whats wrong?
x17ERIC17x 1 year ago
@x17ERIC17x If you re-installed Windows, you may well have to install a driver for your video card.
FreeCompConsultant 1 year ago
Thanks for the information
freespirited845 1 year ago
is screen resolution how big the stuff is on the screen?
mary047photoblue 1 year ago
@mary047photoblue Essentially, yes.
FreeCompConsultant 1 year ago
Guys how to set my screen resolution to something like "1440 x" something. The max I can change is to 1024 x 768 please I beg you, I have problems.
Nytherr 1 year ago
@Nytherr Your hardware has to be capable of it and you must have the correct drivers installed.
Free Support Forum at: FreeComputerConsultant (dot) com/forum
FreeCompConsultant 1 year ago
My original resolution was 1280 x 800. But I went to this NVIDIA Control Panel, chose a custom resolution of 1280 x 1040 and applied settings. Then boom, my screen was so clear!
distortedkid123 1 year ago
haahaa.. i use the lowest resolution xD
runescapedrawer1 1 year ago
i have a syncmaster 941bw and i should put it at 1440x900 but the best i can do is 1280x1024
how can i change it to 1440x900?
android059 1 year ago
@android059 Make sure that windows sees it as a 941bw and not just a plug n play monitor and that your video card is seen as the model it is and not a generic driver.
Also, your video card must be capable of that resolution
FreeCompConsultant 1 year ago
Help please. I want to get 1024x768 resolution because i have an application and its very important it won't work in my laptop which is 1024x600 in size. Can you give a site or help me to download this resolution? Please.
ramnhell18 1 year ago
@ramnhell18 Your laptop likely does not support that resolution and aspect ratio.
FreeCompConsultant 1 year ago
@FreeCompConsultant hey can help me? My father have 640x400 and 4 bit... when i try to make 1024x768 it change back to 640x400( I downloaded a Nvidia Update for my father PC ) PLZZZ HELP MEE !!!!
bbbbaaaa122 1 year ago
@bbbbaaaa122 I would suspect if you look in device manager, the updated driver is not installed. Either it's not the correct driver or perhaps you need to uninstall the driver, reboot and reinstall the driver.
FreeCompConsultant 1 year ago
@FreeCompConsultant I found another solution xD Settings-Advanced then Adapter-Properties , Driver and Roll Back Driver xD
bbbbaaaa122 1 year ago
wont work on netbook???
PaddyandKazTravels 1 year ago
@PaddyandKazTravels If your netbook supports more than one resolution it does.
FreeCompConsultant 1 year ago
my screen turn totally black. then it stands you need to change frequency. i can`t do anything because everything is black. Any help?
coppincopp 1 year ago
i have only 2 options plz help
kamilo321123 1 year ago
i just got my computer back from getting it fixed and a black bar is on the side of the screen
efee52 1 year ago
help me my screen resolution si stuck at 640x480 i tried everything help
daboss106 1 year ago
we've got a windows XP hp mini laptop and it is at 1024x576 and any time i try to resize the resolution, it won't do it's action!! plz help!
AngelsofGTA4 1 year ago
Check with HP support and make sure you have the latest video driver
FreeCompConsultant 1 year ago
Do you know where I can download a IBM T42 Thinkpad wireless driver?
Thanks
buju 2 years ago
wow, i am very impressed! Not many people- especially tech-minded folks- have such a gift for clear and concise explanation. excellent video.
DizzyHips 2 years ago
hey mine won't let me do it. It's stuck on 640 by 480 on 4 bit..please help...i don't know what's wrong...please help
lazer46 2 years ago
@lazer46 It sounds like your video driver needs updating. When you go to the device manager, do you have a yellow exclamation mark next to the video/display icon?
PCSnippets 2 years ago
@PCSnippets nope. how do i update it? i tried doing it with the right click option but i won't update. Please help
lazer46 2 years ago
What is the make and model of the PC? Also are you using the built in video card or do you have an additional video card?
PCSnippets 2 years ago
@PCSnippets it's a Hp pavillion 533c (desktop) and yes i'm using the built in video card.
lazer46 2 years ago
I've sent you a message with the url for your driver in it. I couldn't post it here for some reason.
PCSnippets 2 years ago
hello my friend, i have the same problem, my resolution is stuck at 640x480, and I cant connect to the internet because the resolution is too low even for the software from my dsl, my pc is a dell dimension 8110 desk top, running windows xp. You seem to know a lot about pcs, please help me...
sl2k4u 2 years ago
Hi, if your resolution is stuck at 640x480, it sounds like you have the wrong video driver on your PC. If you open up Device Manager on your PC, do you have a yellow exclamation mark next to the display property?
PCSnippets 2 years ago
thanks snippets, I see the exclamation point next to other devices, under that I have video controller (vga compatible) with the exclamation point too, among others, is that the one..?
sl2k4u 2 years ago
I've sent you a private email with a link to all the drivers for your Dell Dimension 8110.
PCSnippets 2 years ago
thanks snippets, but where did you send it, I just check my mail and it is not there, thanks again...
sl2k4u 2 years ago
I got them my friend, thanks so much, you are a real help...
sl2k4u 2 years ago
Everything's small...The screen is big but everything else is small.
NinjaMuffinMaster 2 years ago
It sounds like you've just set your resolution too high. The higher the resolution allows more pixels to be used in the same amount of screen space. If you're having trouble reading the screen contents, adjust the screen resolution again to a lower value.
PCSnippets 2 years ago
dude where do u get the yellow cursor
ghfd99 2 years ago
Hi, if you're referring to the yellow circle at the end of the mouse pointer. It is part of the software used to record the computer screen. The software is called Camtasia Studio.
PCSnippets 2 years ago
what if the screen resolution doesn't stay at what you change it to
ERIK5564 2 years ago
What do you mean it doesn't stay? Does it change back after a set amount of time? Does it change back after a reboot?
PCSnippets 2 years ago
I used my computer to show videos on videoprojector. After that my computer resolution is blurry. How could I fix that? Or why is that so? The resolution is set as it was before, but it is blurry...
tehtud2008 2 years ago
under the part where it say display mine dont show up
t3zzop99 2 years ago
this thing knows everyone...-.-
Shikato15 2 years ago
Thanx! helped a lot! now i can open windows full screen instead of being annoyed by it. Appriciate it!
whyohwhy8 2 years ago
lol dude my maximum resoulution is 2048 by 1536 pixles my graphics is ATI Radeon xpress 200M and im useing a laptop and it wasnt suppose to be.... well i like it like that
azbabby 2 years ago
hi i have a question say my laptop was a foot my just an example it would start the right side of the screen on the 2nd inch and ends on the 10th inch on the sides it is black wat do i do
uncleluke125 2 years ago
i played a game called combat arms and when i turned it off, the screen ended up being huge as if it was on 800x600 but when i checked it was on 1024x768. can u help me plz??
fireboy585 2 years ago
Sweet thanx man....my PC had to restart and i needed to put it back sooo thanx
Mattyboe 3 years ago
Why is it my Laptop will not change and show more it bothers me that it does not make much room and do you know how to Fix it so my Internet is not So close up
sexibrandon1 3 years ago
my pc Screen Resolution is not working i get ajust
paki99 3 years ago
Hi I Need your help i went to the properties and settings but the slider your are talking about the slider that changes the resloution my slider stays on the last and when i drag it it wont go any further it stays the and color quality stays lowest please help me!!!
Atb194 3 years ago
Sounds like you don't have the proper drivers loaded.
I can help you at the support forum on my website.
FreeCompConsultant 3 years ago
yea none of them worked
mattmatt369 3 years ago
right click the desktop, select Properties
FreeCompConsultant 3 years ago
What display "thingy"?
FreeCompConsultant 3 years ago
i got a question i needed to do some vista download or something and when i did it my resolution got all screwed up and i did what u did and i tryed all of the resolutions thye have and none of them worked can you please help
mattmatt369 3 years ago
What do you mean by "none of them worked"? They weren't what you wanted?
FreeCompConsultant 3 years ago
thanks man
totaled999 3 years ago
thanks!!
Jordanclegg 3 years ago
Thanks for your help
evilsora1 3 years ago
umm is it bad if you max it to them max does it affect your eyes
NinjaDKDavid 3 years ago
Try watching the follow up video I just did - Part 2
FreeCompConsultant 3 years ago
the screen resolution button wont move.know how to fix it?
imanoob4 3 years ago
how to make it 1680x1050 60 hz?
aliallamiK 3 years ago
please send me link to where you got that mouse cursor?
we0wnpl0x9ownsyou 3 years ago
Glad it helped!
FreeCompConsultant 3 years ago
thank you so much! this video really helped when my computer's moniter was too small and the screen was to big.
so thank you :)
darkniall0 3 years ago