How to Make: Soda Can Ring【ツ】

[infectedisme]

【ツ】

[MrJrises]

you should do narraton nice voice :) no perving intended lol thankyou shall be using this method for a flm prop

[MDKE114]

Great idea; pretty work! Instead of duct tape, maybe try copper or silver foil tape. Just an idea.

[ambroset1990]

@MDKE114 That's a good idea! If you try it let me know how it turns out!:) Thank you for watching

[shay456789]

I made cool earrings out of 1 soda can.You have inspired me to make my own creations. All you have to do is have a sheet of a can meaning cut of the top and bottom. Then cut 12 circles. You will need a earring hook and 10 jump rings as well. Use a thumbtack to poke 2 holes, one on the top of the circle and one on the bottom and make it as close to the edge as possible. Then take jump rings and connect the circles. I made them so i have 2 sets of 3 circles on a line and 6 circles on one earring:)

[megabirdlove]

【ツ】

[TheHaZMaTBand]

Same concept + thicker strip + mountain dew can = epic bracelet. Yep, ima guy and I have to say this video is pretty inspiring and cool

[ambroset1990]

@TheHaZMaTBand Wow I'm impressed! Way to get creative! Go you!!!:)

[haleymimi9]

Awsome you helped me out sooo much! I have forwarded this To My friends they are all making them now! :) xx

[ambroset1990]

@haleymimi9 Aww thank you so much! I hope you and your friends continue enjoying my videos! *hugs*

[GaVvAnAtOr]

thanks something to get someone for valentines day

[Manson0Skold0Ratliff]

How did you cut the strip!?

[ambroset1990]

@Manson0Skold0Ratliff scissors in this video-be careful since it is sharp

[Sugerberryxxx]

I am definetly gonna try this <3 thnx

[ambroset1990]

@Sugerberryxxx Be careful not to cut yourself but have fun!

[luvtodance99]

i love your video its awesome and i would love you to make more!

[ambroset1990]

@luvtodance99 thank you and I just uploaded a new craft video!:)

[Diana79737]

iLove This Video & iLove Your Voice Its Soo Calm No Hating

[tudela1228]

Wow, This was very useful. Never thought of it before, great idea

[superarmands]

ur voice is so calm... no h8

[ambroset1990]

@superarmands thank you:) I made a meditation video called "Relaxing Forest Meditation for You!" If you want to check it out you are more than welcome to!:)

[1amLtg]

@BieberShawtyRubiaz a can strip

[Authorf418]

How did you cut the strip of the soda can?

[zoeybatterup152]

or you can take the lid of a 2-l bottle and cut the top off.

[TheAuroragoddess]

Very clever lol to bad I don't buy a lot of soda.

[AdamTheMc]

I needed to make a last minute Xmas gift and I found this very help full. In my case of course i had to cut my self with the aluminum can and the ring came out nothing like yours.. But thanks for this. You have a very pleasant voice to listen to

[TheMasterOfOmni1900]

I used this and my past ideas to create a awesome Green Lantern ring, I'll post a how to soon and refer to this video so i won't have to explain much. I should be posting sometime after Christmas 2011, about January 2012. my name is TheMasterOfOmni1900

[ERIKANUMIR]

bravo Tatiana , facil y lindo!!

[BieberShawtyRubiaz]

what is that ? the gray think ! ?

[angiez82]

Do not make it I did and I cut my self and I had to get stiching

[julieg1985]

@angiez82 There's a warning at the beginning of the video to wear gloves if you're not used to this...

[thehkgirl1]

i made like five, they are great! my friends keep asking me to make them.

[ambroset1990]

@thehkgirl1 YEAH! They are pretty easy to make also!:)

[FaithAw]

I hope you don't mind..

[ambroset1990]

@FaithAw NOT AT ALL:)

[FaithAw]

You are so creative... I love your idea and I will be going to India to teach the little kids your idea so that they can make a living... you are such a blessing. Will try to post vids/pics and send you if possible...

Last but not least, i love your voice and your passion!

[ambroset1990]

@FaithAw Oh my goodness, thank you for all your kind words! Hope you have a safe trip to India and continue living with your amazing heart!:) *hugs*

[Msgothangel55]

@ambroset1990 i did this, and used my blue gun to add a few gems.... so cute >.<

[DogsGoWhat]

Instead of duct tape use hot glue

[kiferti]

SO creative !

[StargateFan2389]

This was pretty cool!, very creative :D



[scredbird]

I saw a video somewhere, about taking 2 safety pins and cut this off and make a loop here. I have been on 23 pages of YouTube, tonight and can't find it. Do you know how or can send me to another site? I really want to make these!

[littllebigcreator1]

When I did the first fold I used sharpie to smooth it was so awesome and thanx I showed my dad he said" where in da hell did u get da muny 2 by a silver ring"

[ambroset1990]

@littllebigcreator1 hahaha nice!:)

[littllebigcreator1]

@ambroset1990 okay I will and fall asleep thanx:)

[0petuniabear6]

you can use a score board to make the fold lines in the metal. It will make folding easier and prefent cuting yourself

[littllebigcreator1]

Ur voice is so soft I think I'm gonna replay .......... over and over :)

[ambroset1990]

@littllebigcreator1 you should listen to my meditation video I did less than a week ago:)

[lollipop76460]

i painted mine with nail polish :3

[SpartionTV]

Cool! thanks, when i can find out how to get the soda cans from off the top of my fridge, i'll enjoy a soda and make one, my dad made me a ring from a old steel

bar, its not rusted though, but he used it to make rings, i got one, but it would be cool to make my own! :3

[hazelnuts014]

AwwI wish I had a soft accent like yours :(

[angiez82]

Long but good

[YoungMoney835]

I just watched this because i love hearing your voice!

[ambroset1990]

@YoungMoney835 awww thanks:)

[zaine154]

@YoungMoney835

i agree, her voice is very soft and warming

[naniiz85]

why not try adding the tape that goes on the inside like before yu close it up on yur finger just saying lol =]



[TheAngelWrath]

Aaawwww! I sliced my finger!!!!! Wtf!!!! Aaaghh!!!! It's bleeding!!!! Awww! My keyboard!!!!!! Aaaahhhhh!!!!!

[LioeIe]

so cool!! im going to make one! thanks

[ambroset1990]

@LioeIe no problem!

[musiconly1221]

I love your fingers!!!!

[HerroSterra0515]

I also dont know how to get a strip of the can...:\

[HerroSterra0515]

I could listen to you talk all day:) No hating. Im serious. It's so soothing and stuff!:D I<3yourchannel!:D

[ambroset1990]

@HerroSterra0515 Aw thank you! I plan on doing a meditational video sometime in the next few months. in response to your question to get a strip of can you have to stab the can with a pair of scissors and then just cut a strip out without cutting yourself-wear gloves

[HerroSterra0515]

@ambroset1990

:DD Thank you so much!!!<3

[Sanguinarian15]

how does this ring do against constant wear? planning to make my girl one just as a cute present then get her a better ring later.

[ambroset1990]

@Sanguinarian15 For constant wear I wouldn't use duct tape--maybe electrical or painters tape b/c the duct tape stickiness 'melts' with constant body heat.

[tretastellar]

this very nice! Thank you!!

[ldyjewell]

if you use a ballpoint to run along the lines you draw at the beginning, it will make the folding easier.

[ambroset1990]

@ldyjewell Good tip!:)

[ldyjewell]

if you use a ballpoint to run along the lines you draw at the beginning, it will make the folding easier

[TinierSelfy]

I just made one out of an Arizona can :D

[AbryonaRose]

This is amazing! Good Idea!



[nbltrmbe98]

uhm wiouldn't the soda can thingy give u cuts?

[The4Gomez]

Iam afraid of u how u handle the pop can can do it with beer cans yeah luv it what ur FB search cant find u

[Rafa600]

Wooow girl, i love your voice!!! Nice rings!! i will make some.

[ambroset1990]

@Rafa600 Thank you and tell me how the rings turn out!

[TheNanner]

Cool ring! Wouldn't it be great to glue some hotfix crystals around it?

[ambroset1990]

@TheNanner Who says you cant glue those on??? GO FOR IT!

[liliopopez7z]

i was just saying

of no oh hsit oh god she gonna hurt her self with that can soda

and i felt so comfertable when u end it like that^^

thx for the gvid...

[Unicorn123Lover]

YOUR SO STRONG!!!!!8O...or maybe i am just weak:/anyway! i love your videos, thanks for uploading them:)

[ambroset1990]

@Unicorn123Lover hahahahaha your comment had me laughing for a good minute:P Thank you for the love:)

[CatLover62011]

once she is doing the tape it gets hard 2 tell wht she is doing... ahh shame cuz i like this idea... very creative

[alepilam]

do u hv facebook ??

[Mindlessnashalie]

My rings gonna say mindless behavior so happy thanks

[megabadboy400]

cool video i made one for my mom and i think shes going to LOVE it

[ambroset1990]

@megabadboy400 Aw! That's great:)

[ambroset1990]

@megabadboy400 Aw! That's great:)

[megabadboy400]

@ambroset1990 by the way awsome channel keep it up :D

[sosaerica18]

nice thank you so much you have no idea how much this video has helped

[ambroset1990]

@sosaerica18 aw I am very happy this helped you out! :) Thanks for watching!

[pvonsparty]

adding this to my to do list :-)

[ambroset1990]

@pvonsparty YEAH!:)

[PiNksIzzlEs]

how did u make the smiley face in the name of ur video

[xxkeichii]

cool! :d.

[missmecriss]

What did you use to cut the sheet of the can!? Without slicing yourself open..? Please reply as soon as you get this!!!

[ambroset1990]

@missmecriss SCISSORS!!!:) just hold the strips in the center--not on the sides:)

[missmecriss]

@ambroset1990 Sorry, I ment to cut the sheet out of the whole can. Like when you have the full pop can, how did you cut a sheet out of it?

[ambroset1990]

@missmecriss WEll i take the scissors and stab the can and then start the cutting:)

[missmecriss]

@ambroset1990 Ohh I see!!! Thank you very much!!!

[ambroset1990]

@missmecriss Anytime!:)

[pvonsparty]

@ambroset1990 thankyou!!! I can never figure out how to cut it! I have to have my dad use a blade to cut it!

[jtown908077]

im gonna make it asap

[ambroset1990]

@jtown908077 Did you make it??? How did it turn out?:)

[multigunlover]

i did this for my gf a while back and imprinted her name in it using a metal rod like a pen

[ambroset1990]

@multigunlover Aw great idea!:)

[multigunlover]

@ambroset1990 thank you, im going to sub u btw you seem cool

[ambroset1990]

@multigunlover Yeah! Thank you for supporting my channel with a sub I really appreciate it!

[0crazymoon0]

Nice recycle my daughter will love this one

[ambroset1990]

@0crazymoon0 Yeah! So happy! Tel me how it turns out!

[Magmc7]

cool

[SaahRaah123]

imade mine out of a sprite can and looks pretty good (: thanks for the video :D

[ambroset1990]

@SaahRaah123 SWEET! good job on completing the ring!:):):)

[le97ah]

Wow it even looks good plain, without any design.

[ambroset1990]

@le97ah I totally agree:)

[KyliesMom415]

I love this!!! Great job!

[ambroset1990]

@KyliesMom415 thank you!

[blackbears200]

SUBBED

[chenchen1957]

also, if you taper one end, you c an slide it in to the other, and no need for tape. so, cut the ring a bit wider than you want, score and fold it so that it will fold to as wide as you want, taper one end, and slide it into the other end o that it fits.

[chenchen1957]

if you use a bone folder and your ruler and score along the lines, it will fold quickly and perfectly...no practice needed.

[shinobusora]

This is so cool! Now I can make simple jewelry and show it off! Awesome video!

[ambroset1990]

@shinobusora Glad you enjoyed it:)

[marlettegarcia]

Very cute :)

[SackBoyMedia]

i can melt down aluminum cans and while its molten i put designs in them 

[ambroset1990]

@SackBoyMedia That is awesome! I would try that but being in a college dorm and all...I wont risk it haha

[ilovemusic123s]

omg i love you so much thank you



[ambroset1990]

@ilovemusic123s ha ha you r so welcome!

[CrackersGanza]

YOU SAVED ME!! i have spent an hour looking for easy to make christmas presents and i found one video of some nice bracelets but this is even better!!!!!! SHE LOVES RINGS AND THESE ARE SO COOL!!!!

[ambroset1990]

@CrackersGanza yeah! glad you like them! I havent tried electrical tape for the inside but I think that would work alot better than the sticky duct tape!

[panzuman]

very very nice! i should have my tut up this week

[ambroset1990]

@panzuman Cant wait!:)

[megpenname]

ohhh that's so cool!! and pretty

[ambroset1990]

@megpenname thanks megs!

[cherrybomb619]

I LOVE YOUR VIDS!!!!!!

[ambroset1990]

@cherrybomb619 awww thank you so much for watching and the love:)

[SuperMac18ROX33]

I would add it to my favorites... But I already have 688, and you can't save more than that! >:l Which is not fair!!

[ambroset1990]

@SuperMac18ROX33 i dont know if I really believe you would favorite this:P jk jk. Thank you for watching and commenting:) Thats always appreciated!

[iamthepokemonlover]

@SuperMac18ROX33 just make playlists :)

thats what i do xD

[SuperMac18ROX33]

@iamthepokemonlover LOL. Did that. I already saved 200, and had to make another. LOLOLOL.

[iamthepokemonlover]

@SuperMac18ROX33 i have like 10 playlists x3

1 for each category (how to, tricks, songs, amvs, ect) x3

200 videos on one playlist? o___O

[SuperMac18ROX33]

LOVE IT!!! XD