Looks like you have your trim tabs, at least one..way to one side. Center trim tabs, turn transmitter on first, then connect battery. May or may not fix it.
If i could do a smiley that rolled its eyes, I would. This has been solved and I just wanted to show likely causes. LIke I said if you read the page, it was caused by the motor having a horrible solder job on it.
I had this problem it's was because I turned the heli on before I turned on the radio. When I turned the radio on first I never had the problem again. I was very new to all this back then.
ya mine does the same exact thing..i accidently turned the idle up switch on and didnt realize until i was mad that it was broke lol first day ever having or flying an rc heli
this is just a guess because the only heli ive flown is the blade cp but radios interfere with it some times and make it go crazy dont think you had a radio on but i've had it happen
they come pretty well but mine had a problem when I first fly it it was well untill I start to force it allot jaja with inverted fly that the main blade grips collapse so since then I replace all the possible things with aluminium and carbon fiber I also install a Lipo 2100ma. and its a beat flying
yeah i had that with my hummingbird. it lasted like 10 seconds i took it outside after a good recharge and it was fine and ive had it for 2 years and not done the same thing since. its most probs the interferance
I know that wifi for computers messes with these and FM Radio and TV signals all affect them too. So go tell your neighbors to turn off all of their junk cause you want to fly!
no i have'nt tried but i fixed it it wasnt that big of a deal and i dont have 2 of these this is my ONLY one i finally fixed it because i focused my attention on my t rex no one in my neighborhood flies or has any thing with the same frequency. yes i did fix it all i had to do was solder something
Well if u have the motor unplugged and full on. Its gonna do that. Thats shitty shock gyro kicking in.
91Racing426 2 years ago
Looks like you have your trim tabs, at least one..way to one side. Center trim tabs, turn transmitter on first, then connect battery. May or may not fix it.
l8again49 3 years ago
it's because ur inside interfering with ur electronics it's normal so take this video out and how does it feel getting called out b a 12 year old
crzygutrsnobrdr 4 years ago
If i could do a smiley that rolled its eyes, I would. This has been solved and I just wanted to show likely causes. LIke I said if you read the page, it was caused by the motor having a horrible solder job on it.
fishravioli 4 years ago
Charge heli battery and raise your antennae.
FailedSquare 4 years ago
battery is in need of a charge.
egiggy 4 years ago
Yup, thats why I went spectrum.
fishravioli 4 years ago
I had this problem it's was because I turned the heli on before I turned on the radio. When I turned the radio on first I never had the problem again. I was very new to all this back then.
vidiator65 4 years ago
ya mine does the same exact thing..i accidently turned the idle up switch on and didnt realize until i was mad that it was broke lol first day ever having or flying an rc heli
kyleg0707 4 years ago
I dont think I said it was amazing, just wanted to inform others about this problem I had.
fishravioli 4 years ago
this is just a guess because the only heli ive flown is the blade cp but radios interfere with it some times and make it go crazy dont think you had a radio on but i've had it happen
wiiman1218 4 years ago
they come pretty well but mine had a problem when I first fly it it was well untill I start to force it allot jaja with inverted fly that the main blade grips collapse so since then I replace all the possible things with aluminium and carbon fiber I also install a Lipo 2100ma. and its a beat flying
GNaranjoN 4 years ago
oooooooo ghost radio
bfap 4 years ago
yeah i had that with my hummingbird. it lasted like 10 seconds i took it outside after a good recharge and it was fine and ive had it for 2 years and not done the same thing since. its most probs the interferance
dink29 4 years ago
Re-solder your tail motor wires, thats all it was.
fishravioli 4 years ago
I'm having the same problem could you please tell me how you fixed it.
grandmasterswigg 4 years ago
i thik nk it's interference
helicub81 4 years ago
do ur servos make taht grouding sound? if they do that means that there's too much preassure on the servos
helicub81 4 years ago
I know that wifi for computers messes with these and FM Radio and TV signals all affect them too. So go tell your neighbors to turn off all of their junk cause you want to fly!
youtwoba 4 years ago
read the description, this only happens when i pull the throttle up.
fishravioli 4 years ago
no i have'nt tried but i fixed it it wasnt that big of a deal and i dont have 2 of these this is my ONLY one i finally fixed it because i focused my attention on my t rex no one in my neighborhood flies or has any thing with the same frequency. yes i did fix it all i had to do was solder something
fishravioli 4 years ago
It could be your buddy next door flying his rc.
Does it do this with the TX off?
Unplug each servo one at a time and see if it stops
I've noticed my AXE TX had a loose crystal.
Anyways why do you have two of these?
team222badbrad 4 years ago
haha funny
migser85 4 years ago
no its my old one i had'nt turned it on in like two months. i decided i would fix it!
fishravioli 4 years ago
is that ur new axe cp?
jpshoar 4 years ago