Yo! Big "L" !! Wass' up from CANADA!! Old vid, but informative!! Have to start moulding some of the lighter ones in 6 months! Why 6 months you ask? 'Cause there's a warehouse buildin' up right now,..in CANADA!! Thank you, Hulse, Even-ish ,Tate, Hashey,smitty, athleanX( jeffery "C.Dog" ) and to anyone who can pull a challenge into them selves, then push it away, rather than just pushing it away.
awesome job man you have no idea how bad i want stones but those molds are insanely expensive! but def good instructions for when i finally do get some! thanks!
Thank you Hulse for this great post.... I've met Mr. Slater and he makes great stuff.... Slater's Hardware in Ohio! They have annual strongman competitions there for any interested.
@estebonchung87 Actualy it takes up some of the volume that normally the concrete would take, a foam ball with a 3 inch diameter (estimating) weighs less than 3 inch diameter ball made out of concrete.
mint vidio i made 3 one failed out of a space hopper one from a perspex plant pot from homebase and a 210 one from a plastic light bulb cover from a car park found it on a dump.that 400 of yours is a cracker.
to take up space and make the stone lighter. You put the foam ball in the center. You can also do the same thing with a lead ball to make the stone heavier.
@Brianman69 Would cellophane wrapped around it supplemented with duct tape work just as well, but conserve some tape? Or would the weight seep through it?
Thats the best instructional video i've seen on stones, makes it look easy. I've ordered 2 moulds from slaters so hopfully it works out well, what did you use to weigh them when they were done?
sick
MrKillahyn 1 week ago
Thanks Elliott!!
darrinlenton 1 month ago
How much concrete did you need???????
InteractiveWelness 1 month ago
thanks for the vid man, me and some buddies are making our first stones this weekend!
toddjsmith43 1 month ago
once again ladies and gentemen elliot hulse proves to the word why he's a boss! :D
jinunit 1 month ago
Where do you get the plastic containers to put the concrete mix in to make your atlas stone?
fuzzie567 4 months ago
How much does it approximatly cost to make a 250 pounds ball ? Thank you :)
StrenghtAthlete 5 months ago
The family in the end looked like the 'Big Dango Family', haha! Great videos, very helpful and interesting.
DimitriRadzinsky 6 months ago
Yo! Big "L" !! Wass' up from CANADA!! Old vid, but informative!! Have to start moulding some of the lighter ones in 6 months! Why 6 months you ask? 'Cause there's a warehouse buildin' up right now,..in CANADA!! Thank you, Hulse, Even-ish ,Tate, Hashey,smitty, athleanX( jeffery "C.Dog" ) and to anyone who can pull a challenge into them selves, then push it away, rather than just pushing it away.
blackkened1 6 months ago
GOOD VIDEO , HANDS ON EDUCATION .
GIANFRANCO FRONZI AUGUST 16
9493760 6 months ago
awesome job man you have no idea how bad i want stones but those molds are insanely expensive! but def good instructions for when i finally do get some! thanks!
Juice8711 6 months ago
I lift things up and put them down.
norb1937 8 months ago
just because they used 80lbs of concrete won't make an 80lb ball. You're forgetting about water weight.
some5672 8 months ago
Hey, it's just like making muffins!
...MAN MUFFINS!
PrivChurch 9 months ago
how did you get the foam ball to stay centered? we made one and had a problem getting it to stay in place. we had to use a metal rod to hold it down.
southst83 9 months ago
new channel Idea "making shit with Elliot"
Dayberry 9 months ago
I like the marks on his forearms. I've got some just like them.
slauge 10 months ago
I must watch this video like 3-4 times a year, just reminds me of the Summer so much, Bringon the summer
jonnofun123 11 months ago
ROLL IT DOWN A HILL!!!!!!
midnightoker1197 1 year ago
how much concreate do u put for the 157
snowskingz14 1 year ago
@snowskingz14 I'd bet he uses 157 lbs of concrete....
Deanwvu 1 year ago
@snowskingz14 lol, read the bag of concrete.. It should tell you how much concrete it yields..
NJnaturalBB 1 year ago
Get the stones from the mountains
Stijlistik 1 year ago
Thank you Hulse for this great post.... I've met Mr. Slater and he makes great stuff.... Slater's Hardware in Ohio! They have annual strongman competitions there for any interested.
lawsonhc 1 year ago
can i know where to get the molds? i can't seem to get it in singapore
deadbass89 1 year ago
check out my videos! give me some tips!
lildrummerboy189 1 year ago
yea if i started lifting stones i could prob get a lot stronger i need to make some
mossberg451 1 year ago
so you cant purchase the stones you would have to buy the molds?
mossberg451 1 year ago
ok lets go bowling naw just kidding awesome 375
S2000rules 1 year ago
where do you get the molds
marcosisfat 1 year ago
thats one big ass stone ball lol
parkerman16 1 year ago
how many days did you wait till you took the mold apart
705ish 1 year ago
hey wanna buy one of your strength camp shirts really badly
craigedwards1992 2 years ago
@ImTheDarkcyde the foam balls are for making for a lighter weight stone by taking up some of the mass inside the actual concrete stone...
estebonchung87 2 years ago 5
@estebonchung87 Actualy it takes up some of the volume that normally the concrete would take, a foam ball with a 3 inch diameter (estimating) weighs less than 3 inch diameter ball made out of concrete.
NJnaturalBB 1 year ago
mint vidio i made 3 one failed out of a space hopper one from a perspex plant pot from homebase and a 210 one from a plastic light bulb cover from a car park found it on a dump.that 400 of yours is a cracker.
mickpend1 2 years ago
What were the foam balls for?
ImTheDarkcyde 2 years ago
to take up space and make the stone lighter. You put the foam ball in the center. You can also do the same thing with a lead ball to make the stone heavier.
TheOpenSight 2 years ago
Awesome!!!
yyportne 2 years ago
Make sure to use enough tape or the mold will separate and that sucks
Brianman69 2 years ago
@Brianman69 Would cellophane wrapped around it supplemented with duct tape work just as well, but conserve some tape? Or would the weight seep through it?
dethmaul 1 year ago
Thats the best instructional video i've seen on stones, makes it look easy. I've ordered 2 moulds from slaters so hopfully it works out well, what did you use to weigh them when they were done?
rgugliel 2 years ago
I lolled at 9:01, what did your friend say?
Younowkoed 2 years ago
great video. They turned out better than my stones. how much water did you use in the concrete mix?
spagnot 2 years ago
Great videos!! Everyone of them are inspiring!! Thanks a lot Elliott!!
Kilo1164 2 years ago
man u have the best gym and the strongest members
PregnantWorker 2 years ago 8
you should try mma fighting if you like competing...im pretty sure ur strong enough all you need is little experience and some cardio your good
datboiko15 2 years ago
I found it. Slaterhardware(dot)com
theDrumkilla 2 years ago
thats awsome nice work. That sounds like a future project for myself...after I build my sled !
TheAmericanCreep 2 years ago
What was the name of the website to visit for the amount of concrete for each Atlas Stone??
I heard either slayerstone or slayyourstone???
theDrumkilla 2 years ago 2
google: slater stones
strengthcamp 2 years ago 2
@strengthcamp
the concrete,should be a little bit more liquid
sfentonas88 1 month ago
@theDrumkilla I pick things up and I put them down.
norb1937 10 months ago
@norb1937 oh do u now
Bishiup 8 months ago
haha! -- I have my daughters (5 and 3) load little sand filled bags for fun and torture :)
strengthcamp 2 years ago
did you break your right arm? that scar you have looks kinda big.
toshiba009 2 years ago
no, those are scars from loading stones :)
strengthcamp 2 years ago
definatley doin this.
moiphy 2 years ago
wow man your good at making those
yasinpatel12345 2 years ago
Great Video! I'm going to have to try this one day. Thanks for posting, Elliot.
haider87 2 years ago
Thats bad ass nice tip they came out better than what I was imagining.
TexasAmateur 2 years ago
what does the big one weigh?
nikkonaa 2 years ago
i thought they would be really expensive to make, i might try this...
nikkonaa 2 years ago
wow, cheap as chips way to do it!!!!
my hat comes off for you Elliott
IRISHSAS0001 2 years ago
Good stuff!
might try this next spring ;)
TaeIeon 2 years ago