@anniepie17 LOL. Good attention to detail. I didn't realize that until recently. And then Skyward Sword comes out... and BAM. He's right handed! Go figure!
@dcanddyrdekfan92 Hmm... I don't think you can do that. From what I've seen PDO's are specific to Pepakura, and are the 3d models... where PDF's are the flattened 2d versions.
What paper did you use to make it? Cos I used normal paper but it wouldn't be as strong right?? Brilliant papercrafts tho especially the Spirit Gems, Rupee bag and Triforce! :)
@Vialiox15 Yea, normal paper would be too flimsy, especially after the ink makes it wetter. I use 110 lb cardstock lately, although I much prefer the 65 lb TEXT weight (not cover weight) from PrintWorks. It's thinner than 110, so better for small details. : )
@chris24jc Brilliant :) Thanks I'm a huge zelda fan an i started with kingdom hearts chibi papercraft which was easy for me an i started on the majoras mask link the other week and have only done his face haha! ;) x
@JanembaDude72 LOL! There's a Zelda Rap by youtube duo SMOSH, and they make mention of the 'annoying fairy' too. haha. Check it out! Good homage to the games!
@MasterOfPuppets4080 Haha. Yea, amazingly accurate! I assume the Link and Zelda and Majora's mask models were taken straight from the games (Ocarina of Time and Majora's mask)
@chris24jc I already thought Navi's final smash. She into your brain, and annoys NONSTOP. HEY HEY HEY HEY LISTEN LISTEN LISTEN LOOK LOOK LOOK! And your brain explodes! This is why Ocarina of Time isn't really my #1 Zelda.
@MrElcomcombre The white lines are a little hard to avoid sometimes. I score my edges with my pocketknife, which basically cuts a little into the paper, so when you fold it, those edges are exposed. Now, for a black papercraft, its easy enough to go over those with a black sharpie marker.
My suggestion would be to score with a very dull knife instead, so it doesn't actually cut the paper. That might make it easy to fold yet not expose the white lines. Lemme know if it works!
@chris24jc Thanks for the tips :)!!! You're right some white lines must be here x). Thanks and great link btw (i have the pattern but it seem hard with peparuka!!)
@MrElcomcombre Although, I should also mention that only some of the lines are from the folds... the others are from the edge of the paper that you glue onto another edge. No real way to avoid those, but here are some ways to hide them better.
*Use colored paper
*Use thinner cardstock
*for obvious joints, instead of gluing an edge onto a flap from another edge, cut off the flap and glue both edges onto another scrap piece of paper underneath, so both edges are lined up.
@IGotMadAtTheCheat No, unfortunately, I can't. I didn't create the templates, so I don't have the rights to sell any of them. Most of them were gifts anyhow, so they're not really mine anymore. ; )
However as I comment on other video; I dislike the use of opaline paper or cardboard. Indeed it gives strength and hardness to the work, but its very delator on the bends and pasted places and that detract aesthetics to the finish piece.
By the way, very creative use in the last two works.
@Seathon Opaline, eh? Yes, you do need to find a good balance between thicknesses. Too thick, and you can't get good detail. Too thin, and it's flimsy. My favorite is TEXT weight 65 pound cardstock. It's thinner than COVER weight 65 lb and the common 110 lb cardstock that I find at walmart.
@jgfresh1997 Hehe. These were made over a year or so period. But it's true, I do have lots of time. Or I used to. Most of these I made a few years ago at work while we had lots of down time. Those were the days... now my papercraft time is mainly at lunch.
@vinny8589 Not for quite awhile. for that one, once you cut out the pieces, watch the video again when I turn it around. That will help you see where all the pieces go. ; ) Hope that helps! Have Fun!
@jgfresh1997 hehe. Yup. Someone's gotta do it I guess. Nobody every cleans up their weeds in Hyrule... which sucks cause people apparently lose rupees in them constantly!
@BeepBros LOL. No kidding? That's pretty funny. I'd request that they play the Zelda theme song over the PA speakers instead of ringing a bell for recess. LOL.
@deitylink4567 It varies on which one your referring to. The more edges you see, the longer / harder it is. Also the smaller detailed ones are more difficult.
But since you've already got a feel for the cubeecrafts, that's great! Cause it means you're already used to the scoring and gluing! : )
I recommend to anyone to start with a few that don't look very daunting to get practiced, then tackle one that you really like. If you mess up, just cut it off and print that part again. ; )
its me mzz's son i played most zelda games like the legend of zelda zelda 2 ocarina of time including majora's mask also link to the past links awakening a demo for wind waker and the full game of twilight princess oh i was going to say i draw really good and was going to say if you want me to send a picture to you just tell my how i can get it over to you or how i can contct you.
@MzzQuesadilla Hi again! Wow, you've played more Zelda games than me for sure. I've played Ocarina of Time and Majora's mask, and I watched my friend play Wind Waker and some of Twilight Princess, but that's it.
That's awesome on your drawing? Do you draw by hand or on the computer?
Thank you for such an cool offer! I'm honored! I can get you my email address if you can send it that way. ; )
@MzzQuesadilla i'm impressed and i've played almost every single canonical zelda game, telling that i played more zelda games than you, but that's not my point
you're an artist
like your papercraft
really awesome
i'm sure i will never have the capability to make one of these
send your art to a gallery
just hope about your art being the first of these to enter because there are asian guys and they can do everything
@MasterOfTrapos LOL! Thanks. Yea... the papercrafting community in Japan is HUGE. I get lots of my templates from Japanese sites... which can be difficult when you can't read the font. haha!
@PuppyDogVids Yes, that one is kinda difficult. And VERY time consuming if you use the 'lineless' version. The creator of the template made one with the dotted lines, and one without so they don't show, which is great, but it takes longer to score those lines before folding.
@ImpressiveJEFF Some of the templates come with instructions... some don't. For those, I recommend doing the best you can to piece them together in your mind or in test before gluing, or use this video and pictures for reference. : )
@KingdomHearts1207 Yes. Some are harder than others however. If you're new to papercraft, I strongly suggest starting with an easy one, even if it looks way too easy for you. It will help get you used to the piecing together and gluing techniques you'll definitely need on the harder ones. "Haku" figures are great to start, cause they're just boxes. (Haku is just a style of figure, but it can be of any character) Can't get easier than that. Besides, they often make cute characters. ; )
@KingdomHearts1207 Yup! LOTS of em. Just search Haku Papercraft and you'll have tons to choose from. Find a character you know and like, and bam. You'll be hooked. ; )
Check out my vid for Ash from Army of Darkness for an example, or Simple G1 Optimus or Haku Devastator.
@xxDoomyBleedsxx I might be able to, but it will take me quite a while to get around to it unfortunately. What part are you stuck on?
Cut out all the pieces and fold them on their lines, then use this vid as a guideline on where the pieces go and match up. They only fit together one way, so that helps. ; )
@acefrehley813 Uh oh! Thanks for letting me know! Aw jeez... it's just a stupid ad now. Sigh. I found another link with rupee's so I replaced it in the description. Hope you like them!
@acefrehley813 Hehe. I hear ya. Sometimes the little pieces are insanely difficult to cut and fold, much less glue into place! Sometimes, if you do it right, you can print them on a larger scale, so it will be easier to make. However, it certainly takes time to make sure the pieces don't overlap pages and whatnot... way harder than printing smaller scale, unfortunately.
those r so awesome! the triforce, with the 3 stones is sick! its cool how that link has the sword that can go on his back, or he can hold it!!!!! i wish i could make those
@david164047 Actually, I can't technically charge for these, because someone else designed the templates to distribute freely. I suppose I could charge a 'builder's fee' for the construction labor alone... but I've never done that before. Which model are you referring to anyway?
sorry im mzzquesadillas son i want to apoligies because i was wrong i should have only said good job but its from majoras mask please forgive me in fact im the dumb dumb
@MzzQuesadilla That's very nice of you to apologize. Thank you, and I forgive you. I didn't take offense to it. You're not a dumb dumb though. I'm glad you like Legend of Zelda as much as I do! : ) Lots of people didn't care for the Majora's Mask game, but I loved it! Ocarina of Time is still my favorite, but Majora was really fun too!
@MzzQuesadilla Good eye and memory! I basically meant it was from the N64 games, vs Wind Waker or NES versions. But I should have been more specific. Thanks for clarifying!
awsome
gamefreak5037 3 days ago
HOW THE FUCK DID YOU DO THAT OR GOT THAT? ME WANT!
TonyAvalosGTA 5 days ago
@TonyAvalosGTA LOL. Check the description for the links to all the templates. : )
chris24jc 1 day ago
0:40 thumbs up if you were telling him that Link is left handed!!!
anniepie17 1 week ago
@anniepie17 LOL. Good attention to detail. I didn't realize that until recently. And then Skyward Sword comes out... and BAM. He's right handed! Go figure!
chris24jc 6 days ago
Comment removed
anniepie17 1 week ago
This has been flagged as spam show
Does anyone know how to convert a PDF file to a pdo file so I can print out a design
dcanddyrdekfan92 2 weeks ago
@dcanddyrdekfan92 Hmm... I don't think you can do that. From what I've seen PDO's are specific to Pepakura, and are the 3d models... where PDF's are the flattened 2d versions.
chris24jc 2 weeks ago
is awesome :Friki:
wolfang2020 2 weeks ago
@wolfang2020 Thanks!
chris24jc 2 weeks ago
Why does some of them i cant download such as the rupees and moneybag and some have passwords
GrubKiller96 3 weeks ago
@GrubKiller96 They're all from different people and websites, and some people like to do the password thing.
Which links are broken? The Rupee and moneybag are just pictures that you save.
Hope that helps!
chris24jc 2 weeks ago
@chris24jc the spirtual stones are the ones with the passwords
GrubKiller96 2 weeks ago
@GrubKiller96 Hm. The spiritual stones open up as a jpg for me... no password or anything. Weird!
chris24jc 2 weeks ago
@chris24jc well i used pepakura
GrubKiller96 1 week ago
What paper did you use to make it? Cos I used normal paper but it wouldn't be as strong right?? Brilliant papercrafts tho especially the Spirit Gems, Rupee bag and Triforce! :)
Vialiox15 3 weeks ago
@Vialiox15 Yea, normal paper would be too flimsy, especially after the ink makes it wetter. I use 110 lb cardstock lately, although I much prefer the 65 lb TEXT weight (not cover weight) from PrintWorks. It's thinner than 110, so better for small details. : )
chris24jc 3 weeks ago
@chris24jc Brilliant :) Thanks I'm a huge zelda fan an i started with kingdom hearts chibi papercraft which was easy for me an i started on the majoras mask link the other week and have only done his face haha! ;) x
Vialiox15 1 week ago
can u make a like like?? the thingy that eats your tunic and your shield??
BeaTanLim 3 weeks ago
@BeaTanLim Hmmm... I haven' t come across one of those online... but I know what you're talking about. They're quite annoying... LOL!
chris24jc 3 weeks ago
is ther any tutorial (:? or you bought your papercraft characters (:?
pokisbusa 1 month ago
@pokisbusa Some of them have instructions. Check the links in the description. ; )
Nope, they're all free for download.
chris24jc 3 weeks ago
WHO DISLIK ohhhh. never mind :)
rentenzen1 1 month ago
4:20
Hey you bastard WHY DON'T YOU LISTEN TO ME
JanembaDude72 1 month ago
@JanembaDude72 LOL! There's a Zelda Rap by youtube duo SMOSH, and they make mention of the 'annoying fairy' too. haha. Check it out! Good homage to the games!
chris24jc 3 weeks ago
One day, I'll build like like you :) right now I'm working on Medli from The Wind Waker!
deryer 1 month ago
@deryer Awesome!
chris24jc 3 weeks ago
@chris24jc all of them!
Hazza123498765 1 month ago
Do you have a tutorial by any chance? I would love to learn how to craft things like that! :)
Dudley731 1 month ago
@Dudley731 The closest thing I have to a tutorial is a vid on making papercraft pivots... check it out! Hope it helps!
chris24jc 1 month ago
Nice word :D
Hazza123498765 1 month ago
@Hazza123498765 LOL. Which one?
chris24jc 1 month ago
Wow, it's like they jumped out of the TV! It's like Super Smash Bros in real life :D
MasterOfPuppets4080 1 month ago
@MasterOfPuppets4080 Haha. Yea, amazingly accurate! I assume the Link and Zelda and Majora's mask models were taken straight from the games (Ocarina of Time and Majora's mask)
chris24jc 1 month ago
@chris24jc Just imagine if they fought on the desk once you left :O Link vs... NAVI!!!
MasterOfPuppets4080 1 month ago
@MasterOfPuppets4080 LOL. I'm sure he would find her annoying after awhile... we all do. haha.
Whoever loses would be in little paper shreds everywhere.
chris24jc 1 month ago
@chris24jc I already thought Navi's final smash. She into your brain, and annoys NONSTOP. HEY HEY HEY HEY LISTEN LISTEN LISTEN LOOK LOOK LOOK! And your brain explodes! This is why Ocarina of Time isn't really my #1 Zelda.
MasterOfPuppets4080 1 month ago
Love the papercraft, how to don't have the white lines please? i ll make my first papercraft in few day :)
MrElcomcombre 1 month ago
@MrElcomcombre The white lines are a little hard to avoid sometimes. I score my edges with my pocketknife, which basically cuts a little into the paper, so when you fold it, those edges are exposed. Now, for a black papercraft, its easy enough to go over those with a black sharpie marker.
My suggestion would be to score with a very dull knife instead, so it doesn't actually cut the paper. That might make it easy to fold yet not expose the white lines. Lemme know if it works!
chris24jc 1 month ago
@chris24jc Thanks for the tips :)!!! You're right some white lines must be here x). Thanks and great link btw (i have the pattern but it seem hard with peparuka!!)
MrElcomcombre 1 month ago
@MrElcomcombre Although, I should also mention that only some of the lines are from the folds... the others are from the edge of the paper that you glue onto another edge. No real way to avoid those, but here are some ways to hide them better.
*Use colored paper
*Use thinner cardstock
*for obvious joints, instead of gluing an edge onto a flap from another edge, cut off the flap and glue both edges onto another scrap piece of paper underneath, so both edges are lined up.
--====--
chris24jc 1 month ago
wow what inspiration!
zaemod 1 month ago
@zaemod Thanks!
chris24jc 1 month ago
would you sell also?
IGotMadAtTheCheat 1 month ago
@IGotMadAtTheCheat No, unfortunately, I can't. I didn't create the templates, so I don't have the rights to sell any of them. Most of them were gifts anyhow, so they're not really mine anymore. ; )
chris24jc 1 month ago
looks hard as tits!
IGotMadAtTheCheat 1 month ago
@IGotMadAtTheCheat LOL. Yea, some of em are.
chris24jc 1 month ago
This is art, yes, art! I like the legend of zelda too! :D
DogTheCats 1 month ago
@DogTheCats Cool!
chris24jc 1 month ago
you have talent!
TheCursedcupcake 1 month ago
@TheCursedcupcake Thanks!!!
chris24jc 1 month ago
Great collection!
However as I comment on other video; I dislike the use of opaline paper or cardboard. Indeed it gives strength and hardness to the work, but its very delator on the bends and pasted places and that detract aesthetics to the finish piece.
By the way, very creative use in the last two works.
Seathon 1 month ago
@Seathon Opaline, eh? Yes, you do need to find a good balance between thicknesses. Too thick, and you can't get good detail. Too thin, and it's flimsy. My favorite is TEXT weight 65 pound cardstock. It's thinner than COVER weight 65 lb and the common 110 lb cardstock that I find at walmart.
Thanks on the last 2! I'm pretty proud of those.
chris24jc 1 month ago
9001 views...
beebnegron 2 months ago
dear santa...
Vendosser 2 months ago
is it easy to build?
randomvideosagain 2 months ago
@randomvideosagain Which one? Some of these are quite hard, others are relatively simple.
chris24jc 2 months ago
@chris24jc the link one from majorars mask and link form wind waker? i was planning on making those
sephirogamer 1 month ago
That's awesome!
BrunoTheLegendKiller 2 months ago
@BrunoTheLegendKiller Thanks!
chris24jc 2 months ago
@chris24jc I tried the link the hard one is link when I was making the face I got so frustrated when I was making it
dragonballzboy1000 1 month ago
That is freaking beastly!
TheZeldalover1999 2 months ago 2
@TheZeldalover1999 Hehe. Thanks! Great comment!
chris24jc 2 months ago
you have allot of time on your hands
jgfresh1997 2 months ago
@jgfresh1997 Hehe. These were made over a year or so period. But it's true, I do have lots of time. Or I used to. Most of these I made a few years ago at work while we had lots of down time. Those were the days... now my papercraft time is mainly at lunch.
chris24jc 2 months ago
@chris24jc they look great thow
jgfresh1997 2 months ago
@chris24jc an u teach or show me how u made the wind waker link?
vinny8589 2 months ago
@vinny8589 Not for quite awhile. for that one, once you cut out the pieces, watch the video again when I turn it around. That will help you see where all the pieces go. ; ) Hope that helps! Have Fun!
chris24jc 1 month ago
3:05 "choping down the vegatation"
jgfresh1997 2 months ago
@jgfresh1997 hehe. Yup. Someone's gotta do it I guess. Nobody every cleans up their weeds in Hyrule... which sucks cause people apparently lose rupees in them constantly!
chris24jc 2 months ago
@chris24jc great line lol.
jgfresh1997 2 months ago
that big triforce was a great idea! that's so sick
chucker173 2 months ago
@chucker173 Hehe. Thanks! Nice and simple too!
chris24jc 2 months ago
this is amazing! perfect for gift too. thanks for sharing!
lizoxoxo121 2 months ago
@lizoxoxo121 Agreed. In fact many of them WERE gifts to my fellow Zelda fans. : )
chris24jc 2 months ago
This has been flagged as spam show
BUYING ALL ZELDA COLLECTIBLES OR ITEMS, I JUST LOVE ZELDA ANY SELLERS PLEASE EMAIL ME AT: briansanch69@yahoo.com
WILL PAY GOOD!
BrianUFC1 2 months ago
@chris24jc ya
TheNICKoroni 2 months ago
como los haces
cheleramirez2000 3 months ago
Comment removed
cheleramirez2000 3 months ago
did he say this is princess zelda as a girl?!?
TheNICKoroni 3 months ago
@TheNICKoroni Hehe.. Yea. You know, as a little girl. As opposed to the adult (teen) version when she's grown up. ; )
chris24jc 3 months ago
Is it strange that my old middle school was called zelda
BeepBros 3 months ago
@BeepBros LOL. No kidding? That's pretty funny. I'd request that they play the Zelda theme song over the PA speakers instead of ringing a bell for recess. LOL.
chris24jc 3 months ago
How long does it take to make these, and i am wondering if it is very hard. im use to making cubeecrafts and not real ones.
deitylink4567 3 months ago
@deitylink4567 It varies on which one your referring to. The more edges you see, the longer / harder it is. Also the smaller detailed ones are more difficult.
But since you've already got a feel for the cubeecrafts, that's great! Cause it means you're already used to the scoring and gluing! : )
I recommend to anyone to start with a few that don't look very daunting to get practiced, then tackle one that you really like. If you mess up, just cut it off and print that part again. ; )
chris24jc 3 months ago
What kind of paper do I have to use? ps: sorry if you tell that in the video, no sounds here.
kaps1024 3 months ago
@kaps1024 I prefer to use cardstock Printworks TEXT weight 65 lbs. (Cover weight is thicker)
Lately, I've been forced to use 112 lb, and it's definitely thicker... harder to get good detail in.
chris24jc 3 months ago
@chris24jc ok, thank you ^^
kaps1024 3 months ago
its me mzz's son i played most zelda games like the legend of zelda zelda 2 ocarina of time including majora's mask also link to the past links awakening a demo for wind waker and the full game of twilight princess oh i was going to say i draw really good and was going to say if you want me to send a picture to you just tell my how i can get it over to you or how i can contct you.
MzzQuesadilla 3 months ago
@MzzQuesadilla Hi again! Wow, you've played more Zelda games than me for sure. I've played Ocarina of Time and Majora's mask, and I watched my friend play Wind Waker and some of Twilight Princess, but that's it.
That's awesome on your drawing? Do you draw by hand or on the computer?
Thank you for such an cool offer! I'm honored! I can get you my email address if you can send it that way. ; )
chris24jc 3 months ago
@MzzQuesadilla i'm impressed and i've played almost every single canonical zelda game, telling that i played more zelda games than you, but that's not my point
you're an artist
like your papercraft
really awesome
i'm sure i will never have the capability to make one of these
send your art to a gallery
just hope about your art being the first of these to enter because there are asian guys and they can do everything
watch your back heheh
MasterOfTrapos 3 months ago
@MasterOfTrapos LOL! Thanks. Yea... the papercrafting community in Japan is HUGE. I get lots of my templates from Japanese sites... which can be difficult when you can't read the font. haha!
chris24jc 3 months ago
What paper are u using for the printing? Doesnt look like A4.. Sorry im a noob at this... |:
ilovemyprs 4 months ago
@ilovemyprs No, actually I use Letter size 8.5 x 11 inches (in the US, that's the standard).
I use 65lb TEXT weight cardstock from PrintWorks. : )
chris24jc 3 months ago
Was young link MM hard????
PuppyDogVids 4 months ago
@PuppyDogVids Yes, that one is kinda difficult. And VERY time consuming if you use the 'lineless' version. The creator of the template made one with the dotted lines, and one without so they don't show, which is great, but it takes longer to score those lines before folding.
chris24jc 3 months ago
Is there a tutorial!?
ImpressiveJEFF 4 months ago
@ImpressiveJEFF Some of the templates come with instructions... some don't. For those, I recommend doing the best you can to piece them together in your mind or in test before gluing, or use this video and pictures for reference. : )
chris24jc 3 months ago
i actually made a life size majoras mask and ima make another to wear i might add with these things though thanks for the links :D
redshadowtheultimate 4 months ago
@redshadowtheultimate Oh Awesome! That'd be a kick butt halloween costume! ; )
Lemme know if you ever upload a vid of it. I'd love to see!
chris24jc 4 months ago
Link from Majora Mask my friend.
Tecnomy 4 months ago
@Tecnomy Yea... you're not the first to correct me on that... haha. Brain-fart while recording... sorry.
chris24jc 4 months ago
@chris24jc but your work is EXCELENT!!
Tecnomy 4 months ago
i could only make the goron
ceyel6 4 months ago
@ceyel6 Gorons are cool!!!
chris24jc 4 months ago
Even with templates, isn't it still complicated to make these?
KingdomHearts1207 4 months ago
@KingdomHearts1207 Yes. Some are harder than others however. If you're new to papercraft, I strongly suggest starting with an easy one, even if it looks way too easy for you. It will help get you used to the piecing together and gluing techniques you'll definitely need on the harder ones. "Haku" figures are great to start, cause they're just boxes. (Haku is just a style of figure, but it can be of any character) Can't get easier than that. Besides, they often make cute characters. ; )
chris24jc 4 months ago
@chris24jc Oh, wow - thank you so much! I'll try that sometime, are there any templates on the internet or something?
KingdomHearts1207 4 months ago
@KingdomHearts1207 Yup! LOTS of em. Just search Haku Papercraft and you'll have tons to choose from. Find a character you know and like, and bam. You'll be hooked. ; )
Check out my vid for Ash from Army of Darkness for an example, or Simple G1 Optimus or Haku Devastator.
chris24jc 4 months ago
@chris24jc All right - thank you so much! I will!
KingdomHearts1207 4 months ago
you need skull kid
zeroninja44 5 months ago
@zeroninja44 Yeah, totally. Haven't gotten around to making him yet...
chris24jc 4 months ago
How do you make the piece of heart? I am so lost on what to do. @_@ Can you make a tutorial?
xxDoomyBleedsxx 5 months ago
@xxDoomyBleedsxx I might be able to, but it will take me quite a while to get around to it unfortunately. What part are you stuck on?
Cut out all the pieces and fold them on their lines, then use this vid as a guideline on where the pieces go and match up. They only fit together one way, so that helps. ; )
chris24jc 5 months ago
im trying to get the rupee collection one but it doesn't work
acefrehley813 5 months ago
@acefrehley813 Uh oh! Thanks for letting me know! Aw jeez... it's just a stupid ad now. Sigh. I found another link with rupee's so I replaced it in the description. Hope you like them!
chris24jc 5 months ago
i wish i could make the smaller PCs but my hands are to big to fold the little pieces
acefrehley813 5 months ago
@acefrehley813 Hehe. I hear ya. Sometimes the little pieces are insanely difficult to cut and fold, much less glue into place! Sometimes, if you do it right, you can print them on a larger scale, so it will be easier to make. However, it certainly takes time to make sure the pieces don't overlap pages and whatnot... way harder than printing smaller scale, unfortunately.
chris24jc 5 months ago
those r so awesome! the triforce, with the 3 stones is sick! its cool how that link has the sword that can go on his back, or he can hold it!!!!! i wish i could make those
crazyskia7795 5 months ago
@crazyskia7795 Thanks! And there's a ppc of adult Link too, that one looks sweet! Haven't had time to make it yet tho.
chris24jc 5 months ago
@chris24jc can u make me one for money?
david164047 5 months ago
@david164047 Actually, I can't technically charge for these, because someone else designed the templates to distribute freely. I suppose I could charge a 'builder's fee' for the construction labor alone... but I've never done that before. Which model are you referring to anyway?
chris24jc 5 months ago
So cool!
parsonsian 6 months ago
Awesome! :'D
SoraFFKH 6 months ago
sorry im mzzquesadillas son i want to apoligies because i was wrong i should have only said good job but its from majoras mask please forgive me in fact im the dumb dumb
MzzQuesadilla 7 months ago
@MzzQuesadilla That's very nice of you to apologize. Thank you, and I forgive you. I didn't take offense to it. You're not a dumb dumb though. I'm glad you like Legend of Zelda as much as I do! : ) Lots of people didn't care for the Majora's Mask game, but I loved it! Ocarina of Time is still my favorite, but Majora was really fun too!
chris24jc 7 months ago
Comment removed
MzzQuesadilla 7 months ago
@MzzQuesadilla Good eye and memory! I basically meant it was from the N64 games, vs Wind Waker or NES versions. But I should have been more specific. Thanks for clarifying!
chris24jc 7 months ago
@chris24jc Sorry my son used my profile to post his ignorant comment smh... clever little Link replica hard to believe that's paper.
MzzQuesadilla 7 months ago
@MzzQuesadilla No worries. I've been called worse. lol. At least it was PG. ; )
chris24jc 7 months ago
can u ever make a tutorial for one of them?
iitzJason 7 months ago
@iitzJason Good idea. I think I will do that soon to a simple one... and give some papercrafting tips.
I did already post a vid on how to customize and make a pivot joint, didja see that one?
chris24jc 7 months ago
@chris24jc what's it called?
iitzJason 7 months ago
@iitzJason It's called Papercraft Poseability: How to create a pivoting joint for arms and necks
chris24jc 7 months ago