Scotty, is belt dressing no good? I thought you said it was crap to someone, but just wanted to be sure. I've used it on my drivebelt and it stopped the squeaking momentarily, then shortly after I changed out the idler pully which I thought was the issue. It stopped for awhile, then came back though. It's so hard pinpoint exactly where it's coming from because it drives 4 acc. Any advice on snuffing it out? Thanks, Ryan.
@rhaydon6784 Yes, it's not good, it actually wears stuff out faster and if too much is put on it can ruin bearings on pulleys. I would put a new belt on first, new belts wear the inside grooves too deep then they make noises even though they look OK. Scotty
@scottykilmer Ok thanks for the quick response. I just have one more question. I was looking for a video from you on vibration while braking at high speeds and I didn't see one. Everytime I'm on the highway and I have to brake, my car vibrates like crazy. I already replaced a warped rotor, which I thought was the problem, but that didn't work....Do you think it could be out of alignment that's causing it? Ryan
@rhaydon6784 you have to replace rotors and brake pads together in sets of two. Start there, then check worn front end parts if that doesn't do it. Scotty
my belt only squeeks when i start it in the morning or like everytime i start my car, but it disappears over tiem when im driving it... and i jsut changed my belt a few months ago... so what seam to be the problem scott? pls help
@scottykilmer: thanks that helped, now this may be silly but can u do another video on how check and fix a problem like mine or something similar thank you
Yeah quick question I changed my belts and there is still squeaking every time i start the car every once and awhile is there any lube or spray I need I have an 04 mitsu eclipse
@Snakecharmer21xx NO, never use that crap. Either one belt is not tight enough, or the pulleys they drive have a problem, like worn alternator bearings. Scotty
i know you dont work on Daewoos but the Chevy Aveo would be the same way since its the same engine my Daewoo has 3 belts it has the Drive belt the Serpentine belt and of course the Timing Belt so my question is what would the Drive Belt run compared to the Serpentine belt and if you have ever worked on a chevy aveo you would know that none of the belt are visable so how would u know if it need replacing?
I never worked on either of those models so I can't say. But you would have to access the belt and see if it was cracking on the drive side. Scotty Kilmer
It would still run, but of course the alternator and water pump would not work, so you couldn't go far before the engine would overheat and you'd run out of electricity. Scotty Kilmer
well it would take power from the battery then wouldnt it? then once the batterys dead the car will stall? so if it broke i could still drive it so i can safely pull over?
Well, it's close to being mine. I just got it for my oldest son, as he didn't want the 94 ST I now drive which I got from an old customer. He had to have a 5 speed, didn't want anything else. Scotty Kilmer
I got mine free from a Gates belt representative. If you contact Gates I'm sure they'd either send you one or sell you one, they couldn't cost much, they are just plastic small gauges. Scotty Kilmer
Scotty, how do you change serpentine belts on a 96 nissan pickup?
charmscereal 1 week ago
@charmscereal I just answered this in an e mail to you
scottykilmer 1 week ago
Scotty, is belt dressing no good? I thought you said it was crap to someone, but just wanted to be sure. I've used it on my drivebelt and it stopped the squeaking momentarily, then shortly after I changed out the idler pully which I thought was the issue. It stopped for awhile, then came back though. It's so hard pinpoint exactly where it's coming from because it drives 4 acc. Any advice on snuffing it out? Thanks, Ryan.
rhaydon6784 7 months ago
@rhaydon6784 Yes, it's not good, it actually wears stuff out faster and if too much is put on it can ruin bearings on pulleys. I would put a new belt on first, new belts wear the inside grooves too deep then they make noises even though they look OK. Scotty
scottykilmer 7 months ago
@scottykilmer Ok thanks for the quick response. I just have one more question. I was looking for a video from you on vibration while braking at high speeds and I didn't see one. Everytime I'm on the highway and I have to brake, my car vibrates like crazy. I already replaced a warped rotor, which I thought was the problem, but that didn't work....Do you think it could be out of alignment that's causing it? Ryan
rhaydon6784 7 months ago
@rhaydon6784 you have to replace rotors and brake pads together in sets of two. Start there, then check worn front end parts if that doesn't do it. Scotty
scottykilmer 7 months ago
my belt only squeeks when i start it in the morning or like everytime i start my car, but it disappears over tiem when im driving it... and i jsut changed my belt a few months ago... so what seam to be the problem scott? pls help
cavanfamily12345 8 months ago
@cavanfamily12345 tighten the belt, or replace the auto adjuster if it has one. Scotty
scottykilmer 8 months ago
@scottykilmer: thanks that helped, now this may be silly but can u do another video on how check and fix a problem like mine or something similar thank you
Snakecharmer21xx 9 months ago
Yeah quick question I changed my belts and there is still squeaking every time i start the car every once and awhile is there any lube or spray I need I have an 04 mitsu eclipse
Snakecharmer21xx 9 months ago
@Snakecharmer21xx NO, never use that crap. Either one belt is not tight enough, or the pulleys they drive have a problem, like worn alternator bearings. Scotty
scottykilmer 9 months ago
I just answered my own question. For antone who wants one of those belt gauges you can go to gates.com and order one and they are free.
dennis525371 1 year ago
Hey Scotty, where did you get your belt gauge ? Thank s for the great videos.
dennis525371 1 year ago
i know you dont work on Daewoos but the Chevy Aveo would be the same way since its the same engine my Daewoo has 3 belts it has the Drive belt the Serpentine belt and of course the Timing Belt so my question is what would the Drive Belt run compared to the Serpentine belt and if you have ever worked on a chevy aveo you would know that none of the belt are visable so how would u know if it need replacing?
Matthew55904 2 years ago
I never worked on either of those models so I can't say. But you would have to access the belt and see if it was cracking on the drive side. Scotty Kilmer
scottykilmer 2 years ago
say you were driving and this belt was to break would it cause serious damage to the car? would the car still run or would it stall out?
Matthew55904 2 years ago
It would still run, but of course the alternator and water pump would not work, so you couldn't go far before the engine would overheat and you'd run out of electricity. Scotty Kilmer
scottykilmer 2 years ago
well it would take power from the battery then wouldnt it? then once the batterys dead the car will stall? so if it broke i could still drive it so i can safely pull over?
Matthew55904 2 years ago
As long as it didn't overheat. Scotty Kilmer
scottykilmer 2 years ago
our impala the drive belt has cracks but it doesnt squeal so should it be replaced anyway?
Matthew55904 2 years ago
Yes, if it's cracked, it's time to change it. Scotty
scottykilmer 2 years ago
Hey Scotty,
How's Wyeth doing?
RX7GSLSEowner 2 years ago
He's now a Chief Engineer in the 101st airborne and is going back to Afghanistan in April. Scotty Kilmer
scottykilmer 2 years ago
Congratulations Scotty! Safe returns for Wyeth!
RX7GSLSEowner 2 years ago
Screamin' Eagles!
lovemym16 2 years ago
Is that your personal Celica ST?
I had a 5th gen GT in the same color....GREAT CAR...went to 200K miles when I sold it. Current owner loves it as well.
texan176 2 years ago
Well, it's close to being mine. I just got it for my oldest son, as he didn't want the 94 ST I now drive which I got from an old customer. He had to have a 5 speed, didn't want anything else. Scotty Kilmer
scottykilmer 2 years ago
I got mine free from a Gates belt representative. If you contact Gates I'm sure they'd either send you one or sell you one, they couldn't cost much, they are just plastic small gauges. Scotty Kilmer
scottykilmer 2 years ago