LENZLESS GENERATOR 2 without motor /early video

[smilisav]

Couldn't find large magnets. Now I'm making alternative design:

Current from inner coils send through rectifiers to electrolytes, replace outer magnets with large coils and connect them in series with output.

Since out current is DC, there is no reactance (impedance) in large outer coils. Also, cores for outer coils can be solid iron.

Remanants of magnetism in iron cores start current generation with each new generator start.

[lykenth08]

this concept does work, i can over an amp and only have millivoltes and thats with a less thank idea setup. im working on my own versions and using xeisting motor setups with the minimal of altercations, so its easy to produce and understand =D

[DQuale]

Thanks for sticking up for me, I have at least one other independently verified working replication so far besides you. I urge anyone else to watch my newer videos and go to my website overunitybuilder com before making judgments based upon this old video. You can also watch the other videos on my website. I leave this up as a reference to show things about it not shown in the newer videos, as well as being a part of my public education and disclosure of this device.

[ECX0x100h]

your generator is producing 0.03 watts (3 volts and 0.01 amps)... this doesn't prove that it is a lenzless generator. you are inputting much more energy than it is giving out because 0.03 watts is nothing - it is the output power of 4 bees. you can't say its dragless because you as a human won't be able to detect any drag from 0.03 watts mechanical resistance. nice try though. i'd recommend modelling your ideas in software (such as FEMM) before building them next time - saves you time and money.

[DQuale]

Why not watch the newer videos? This is one of my earliest videos. Newer videos show output powering over 200 jumbo leds each with a 20milliamp nominal rating at 2.5 volts, I changed the coils to 18 gage instead of 28 gage, this is not like a Francoeur design because I use repelling fields N-N or S-S not the failed N-S configuration. Also go to my website for more info overunitybuilder com you should do more research before drawing conclusions ii you are a scientific explorer.

[lykenth08]

Hi - again - i left a comment an its gone?!. oh well, lets hope this one sticks lol. Your build is impressive an nice to look at!. i have a much smaller ring magnet like yours, i get 100s if not 1000s of rpm an tourqe from it. i wanted to know where did you get them ring magnets from please, id like to scale up!! =D

[DQuale]

Go to my website overunitybuilder com go to the page for my generator there is a link to the site. I'd like to see your motor. Can you send a pic of it? My email link is one my website.

[BRONGOHORST]

Connect Bulb on it.Will it shine.

If shine that current is OK.

Only volts don`t meaning anything.

[DQuale]

If you had watched the entire video you would see me switch to the milliamp setting at 3:30 and measure about 10 ma current.

[BRONGOHORST]

Yes But don`t offend ,with 10 miliampers

noone can do anything.

Purpose is that i can Drive CAR, or heat my home, with free energy.

No more money for energy.Only free energy.

[DQuale]

It is a prototype for "science" sake! It is meant to demonstrate the working principle. It can be made better. What do you think the first diode, or electric motor did?

[BRONGOHORST]

I understand but on you tube there are MUCH MUCH eficiences machines,wich are alredy maded.Like in sport, only the best are on first 3 places.

[DQuale]

You must be mentally challenged so I am just going to block you now. There is no reason to continue this discussion.

[variablestatus]

real good stuff, thanks for the video. 5*'s

[DQuale]

My design uses ring magnets that prevent magnetic drag. His inductors with holes don't allow much flux to get to the coils. He didn't understand how the flux behaved.DQ

[DQuale]

I received an email from Mr Francouer informing me that he does understand how magnetic fields behave, so I suppose when he made the disc version he just wanted to show how not to make one. DQ

[importfanatik]

Good work, this is very similar to the interference disk generator by Alan Francour, and other magnetic reluctance generators.

Alan Francour's prototype was much larger than yours, but despite thousands invested could not get it to be sulf sustaining.

Even so, Ive always wanted to build this, and cant wait to see what kind of efficiency you can achieve.