This demo video would be a ton more effective if you used a similar riff for each setting demo'ed - it's difficult to discern tonal changes without a reference or benchmark.
@mattRRgraham1996 randy rhoads did indeed use a 10 band eq. put the 10 band eq between a cranked marshall and a distortion +, and you might get pretty close to his tone.
@gwombat ok thanks man! i mean i dont have a marshall (probs wont for a while) i do however have both a distortion plus and the ten band eq. i just cant have both on
I love this pedal. I admit it took some time to work out the tones I was looking for but if used properly it can make a difference. It DOES however need a strong power supply.
i dont think this guys as cool as he thinks. plus i hate the way he plays. you dont have to always play as fast as you can dude. your not impressing anybody
and also with the power adapter plug included with it, do wou have to have it plugged into some kind of special pedal power supply or can you just plug it into a wall outlet?
@yamahabmxer1 distortion, this pedal is an EQ, it can't make a distortion sound, it works like an equalizer like you have in recording software to make you sound godlike. For distortion you'll still need to switch to the lead channel of your amp (or a pedal)
hey....i tried to use this pedal as a booster for solos in my dist chanel and i do get a lot of tone and sustain but the volume doesn´t change.....what do i do??
i read somewhere that the frequency range on the standard six-string guitar is 82.4, open low E string to 1319, 24th fret high E string. any thoughts or corrections?
Could I use thegigrig generator to power it? I used to use a DC Brick but the piece of shit started pulsing on and off during a practice if a boss pedal was attached and has been like that ever since...
If you want a distortion boost, just get a metal muff or another pedal with built in boost. Easily cuts through and doesn't have 10 bloody confusing sliders. Simples.
@Baadger its not a volume booster... its an eq booster... ie, using it to boost the mids so that solo's can cut through the mix, or get some crazy sounds
@Baadger i agree i thought my volume slider was broken on it, but it doesnt seem to do anything, maybe someone on here could help me out and tell me why the volume slider doesnt work at all, im afraid to run it through a tube amp. so not just you man, but anyone on here have any ideas?
@fendersglespaul I think this mxr is meant to be used with preamp effects units, not onboard ones (i.e on the amp itself). My amp is a Marshall Vintage Modern, the gain and distorion is done on the amp itself, so the mxr eq merely saturates my signal before it reaches the amp instead of boosting actual volume...
It's always funny to me when they talk about metal tones in these demos. Metal uses very rich, high gain, chugging distortion, and yet this guy is using overdrive at best. I really get the feeling this guy doesn't even listen to metal.
Dreadfull demo - cant see the point in this at all - I have a tone pot on my guitar, tone pots on my amp, - if your tone is still crap - this isnt going to help - you need different gear.
@WTFROFLMOA555 It depends on where you have the pedal and what kind of sound you want. Just mess around until you find something you like. If you mean your using it in the FX loop as your EQ instead of the amp, set the knobs to no bass, full mids, no treble. That is the signal unaffected by the amp, mostly.
@Ironsixx No. What about folk with their soft vocals? You could say they're all wusses. People just dig the intensity of the sound. Those who don't like intensity wouldn't like it. Like I said, I really think it's just a different sound (or style of expression).
i play thrash metal and i want to buy this pedal to get a more scooped sound,does this version has any difference than the kerry king version??because this one is cheaper....does the kerry king model work better for thrash kind of sound(just because it is kerry king's model) or there is no real difference???
i got this pedal today and i plugged it to my Marshall MGHDFX100 and the sound went from a Marshall MG to a Marshall JMP! my amp sounds waaaaaaaaaay better now. Classic Tone i give this pedal 9/10
For anyone who really wants to hear how this sounds, I honestly suggest going out and trying to find the pedal itself at your local music shop and sitting down with it for at least 10 minutes. I have one in my Triple XXX's FX loop and it does make a difference. You just need to have patience with any pedal and remember, any pedal will change your sound depending where it sits. It's true.
the thing that sucks about this video is you don't know what pickups or amp he's using. does anyone have this, or the KFK version that uses it for metal? i really need to improve my tone i'm getting from the distortion on the amp, but not to the point where i need a full fledged distortion pedal.
@CemetaryGatesML But if you need to control it during a gig you need to buy an FBV Footpedal, and those things range from 150 to 300 bucks. Better off buying a POD 3 LIVE.
it depends, if you want to change the sound of the Guitar, you put it right after the guitar (that is what he does here), now, if as an example your distortion is too bright, you put it after the distortion and modify the Distorted sound... and so on...
Funny how this is the best demo I've seen all night and yet when you watch the 6 band it sounds like crap. I guess that's marketing. Getting you to buy the bigger one. Enjoyed it all anyways
It just gives you a little more control. I first found this when I was using primarily an RG with EMGs, because they were hella muddy, and I wanted something to brighten it. It depends on what you want.
So this is basically a boost, overdrive and distortion pedal all in one? Looks cool, but i don't understand all of the frequency stuff. i'll probably try it out soon.
@asda6572 il try to explain it to. This may sound gay, but think of your sound as a rainbow, made up of separate colors. And the colors represent the different frequencies. An equalizer lets you boost or cut certain frequencies to "shape" your sound. Many equalizers also have a level slider to use as a booster as well as an equalizer
this is typically put in the effects loop of an amplifer. you need distortion on your amp for distortion, this is just an eq. it takes the signal from your preamp (amp eq, distortion etc) and changes it before sending it to the speaker.
well, i do'nt know the model name, but behringer has a rack eq for like 100 bucks that has i think 31 bands, no joke. that should take care of it. why would you need to take out that uch high end?
You'd need to get a high-pass filter. Not necessarily the typical graphic eq slider type. It acts as a cut for frequencies past a certain point. EQ with sliders only boost or cut the frequencies alotted on the pedal/rack.
Yes 15 and 31 Band EQ's offer more versatility but the MXR 10 Band EQ takes the 10 most crucial frequencies to guitar so the entire 31 Band EQ isn't exactly all the necessary to the average guitarist.
I have the six band it works great with my all valve Marshall. Don't expect this to make a crapy amp sound good. It will make a good amp sound better.
BTW: This guy sucks. When he TRYS to play fast the clarity and dynamics of the notes all all over the place. Slop.
I would say this one because 10 is more than 6, and the more bands you have available to mess with, the more versatility and control you have over your tone.
Lol its the same demo for the kfk. I know its the same pedal but still
crushingoverdrive 2 months ago
Well that was 3 minutes of bullshit
sabbathmc97 2 months ago
This demo video would be a ton more effective if you used a similar riff for each setting demo'ed - it's difficult to discern tonal changes without a reference or benchmark.
cossackpatrol 3 months ago
how could I get a Randy Rhoads tone out of this? I like his sound a lot
mattRRgraham1996 3 months ago
@mattRRgraham1996 randy rhoads did indeed use a 10 band eq. put the 10 band eq between a cranked marshall and a distortion +, and you might get pretty close to his tone.
gwombat 3 months ago
@gwombat ok thanks man! i mean i dont have a marshall (probs wont for a while) i do however have both a distortion plus and the ten band eq. i just cant have both on
mattRRgraham1996 3 months ago
Can I get the tab to that metal riff? Haha
I really do want this pedal though. Well done MXR
slojo88 3 months ago
I love this pedal. I admit it took some time to work out the tones I was looking for but if used properly it can make a difference. It DOES however need a strong power supply.
wannabehendrix 3 months ago
i dont think this guys as cool as he thinks. plus i hate the way he plays. you dont have to always play as fast as you can dude. your not impressing anybody
DaMusicMan203 4 months ago
and also with the power adapter plug included with it, do wou have to have it plugged into some kind of special pedal power supply or can you just plug it into a wall outlet?
topdog2328 5 months ago
@topdog2328 The wall is fine
redsfan293 5 months ago
does the gain knob act as a level control or like a distortion control on it?
topdog2328 5 months ago
does he uses distortion or is it only the pedal and the amp
?
yamahabmxer1 6 months ago
@yamahabmxer1 distortion, this pedal is an EQ, it can't make a distortion sound, it works like an equalizer like you have in recording software to make you sound godlike. For distortion you'll still need to switch to the lead channel of your amp (or a pedal)
Simetra2803 6 months ago
Comment removed
eargasm3 6 months ago
I'm getting one from amazon.com. do i have to buy the adapter separately or is it included?
wuwei5150 6 months ago
@wuwei5150 included
spasian720 2 months ago
Tera Patrick's husband...!
onesppiegel 7 months ago in playlist pedals 5
hey....i tried to use this pedal as a booster for solos in my dist chanel and i do get a lot of tone and sustain but the volume doesn´t change.....what do i do??
ParkingLot1995 7 months ago
@ParkingLot1995 it isnt a volume boost pedal it's an EQ. If you want to get a boost try the CAE MXR clean boost
GuitarGod94XxXx 4 months ago
the hidden brother of Kerry King lol
Nice tone,wath is the song played at 1:53 please ?
KekeCOBHC 7 months ago
that's a righteous beard.
afzoomie67 7 months ago
i read somewhere that the frequency range on the standard six-string guitar is 82.4, open low E string to 1319, 24th fret high E string. any thoughts or corrections?
userboy6 7 months ago
2:20 i jizzed
james93uk 8 months ago
MXR M108 Has 56% Discount Now!!!
at w w w . cheapbuy-online . c o m / mxr-m108
don't miss only.
poundpit 9 months ago
this guy is almost as weird as Johnny Demarco
SpankieDublin33 9 months ago 20
I just noticed something, its pretty uch the same video as the demo for the kfk version of this eq pedal.
Wtf??
jessem220 10 months ago
@jessem220 Yeah it is except they use pictures of the KFK in that vid, otherwise it's the exact same.
redsfan293 8 months ago
Could I use thegigrig generator to power it? I used to use a DC Brick but the piece of shit started pulsing on and off during a practice if a boss pedal was attached and has been like that ever since...
suroj 1 year ago
Whel there you have it!!
Rocker5234 1 year ago
This has been flagged as spam show
i hate this man.....
theciv91 1 year ago
What's better, this or EHX's graphic fuzz?
Razwithz 1 year ago
Sounds exactly the same as the Kerry king EQ... definitely going to save my money and buy the regular EQ
seanmacman15 1 year ago
The examples he gave sounded better "before" and the final scoop setting didn't even show a before example. Fail.
audiotrax2000 1 year ago
The lowest freq. slider and top two sliders are useless. Well beyond guitar fundamentals and harmonics.
chopperdeath 1 year ago
@chopperdeath Not if you're using an octave pedal. I've also got an EHX micro synth which has mad sub bass.
suroj 1 year ago
@suroj Right!
chopperdeath 1 year ago
I use this with an MXR boost and an Axe FX through a Rockerverb Stack and it sounds great.
StaulkHolm 1 year ago
can i get an FM Radio sound with this pedal?
angusyoung98 1 year ago
@angusyoung98 Yes.
xloserx4xchristx 1 year ago
@angusyoung98 Your guitar already sounds like an FM radio... are you trolling?
xloserx4xchristx 1 year ago
@xloserx4xchristx lol no! i just thought i'd be fun to play a guitar like an FM radio, don't be so sensitive
angusyoung98 1 year ago
@angusyoung98 stick your Strat next to an FM radio. Done. Those single coil pickups are basically antennae.
CyValkarion 1 year ago
If you want a distortion boost, just get a metal muff or another pedal with built in boost. Easily cuts through and doesn't have 10 bloody confusing sliders. Simples.
dukelurnford 1 year ago
why couldn't you show the bypass sound and then with the pedal turned on... now i don't want to buy this pedal
noTULIPplz 1 year ago
This has been flagged as spam show
This guy sucks!!!
bebap75 1 year ago
This has been flagged as spam show
This guy sucks!!!
bebap75 1 year ago
i have a guitar aet up with lace sencor gold single coils would this pedal realy boost the out put of these pickups
captainsrejoice 1 year ago
@metalrocker68 a g&l legacy? i think
TheEchomaker 1 year ago
I have one of these. I got it to give my lead solos a "boost".
It doesn't boost volume at all. I'm pissed off.
Baadger 1 year ago
@Baadger that's exactly what I wanted to try it for... Nuts...
Moviegod37 1 year ago
@Baadger its not a volume booster... its an eq booster... ie, using it to boost the mids so that solo's can cut through the mix, or get some crazy sounds
Zorlak108 1 year ago
@Baadger MXR micro amp boost pedal
spmspm1000 1 year ago
@Baadger i agree i thought my volume slider was broken on it, but it doesnt seem to do anything, maybe someone on here could help me out and tell me why the volume slider doesnt work at all, im afraid to run it through a tube amp. so not just you man, but anyone on here have any ideas?
fendersglespaul 1 year ago
@fendersglespaul I think this mxr is meant to be used with preamp effects units, not onboard ones (i.e on the amp itself). My amp is a Marshall Vintage Modern, the gain and distorion is done on the amp itself, so the mxr eq merely saturates my signal before it reaches the amp instead of boosting actual volume...
Baadger 1 year ago
That beard is triumphant
srrycharlie 1 year ago
say if i wanted to use this to make my distorted tone rin g through for a bit more lead what kinda settings could u use ?
megadeth1996 1 year ago
I find this pedal useless...just made everything sound lifeless and fake.
GallowayJesse 1 year ago
It's always funny to me when they talk about metal tones in these demos. Metal uses very rich, high gain, chugging distortion, and yet this guy is using overdrive at best. I really get the feeling this guy doesn't even listen to metal.
jg76aries 1 year ago
Metal isn't all bar chords...damn.
Xyrium 1 year ago
Dreadfull demo - cant see the point in this at all - I have a tone pot on my guitar, tone pots on my amp, - if your tone is still crap - this isnt going to help - you need different gear.
slugpumper1 1 year ago
It didn't sound like scooped mids...
SidVicious10101 1 year ago
Dunlop.......that video was lame. Doesn't show enough possibilities of the pedal.
darrenw5094 1 year ago
everysingle time he plays something metal he alwyas goes down fret by fret its kinda annoying
TheBigglenn311 1 year ago
this pedal would be better if it had a switch to use the volume and gain sliders without the eq
TheMetalGuy01 1 year ago
this guy is good but right hand is moving too fast to understand the tone
neronosman 1 year ago
Eighteen volts? That's not compatable with anything.
Johngtr13 1 year ago
Scooping mids is for fails.
aligatorsandwitch72 1 year ago
@aligatorsandwitch72 lol......fails?
44eelz 1 year ago
Great sound! what kind of pickups are You using?
Murmeniusz 1 year ago
@Murmeniusz single coils , i think
ParkingLot1995 1 year ago
@ParkingLot1995 Sure. But witch mark of single coils? dimarzio? emg? or something different?
Murmeniusz 1 year ago
How will that work with bass?
Astrokratov 1 year ago
was he on the clean channel the whole time?
SiXsTrInG2287 1 year ago
I use this for my bass. Works really well for on-the-fly tone adjustments in acoustically problematic venues.
Muaguana 1 year ago
Love your video effects. They manage to be crazy and inventive, without actually getting in the way of the video content. Fun.
muzboz 1 year ago
can someone tell me how i should have the knobs on my amp when i have this pedal on?
WTFROFLMOA555 1 year ago
@WTFROFLMOA555 It depends on where you have the pedal and what kind of sound you want. Just mess around until you find something you like. If you mean your using it in the FX loop as your EQ instead of the amp, set the knobs to no bass, full mids, no treble. That is the signal unaffected by the amp, mostly.
TheCobra94 1 year ago
metal is so gay. Its so wanna be cool.
Ironsixx 1 year ago
@Ironsixx That's straight ignorant. It's just a different sound.
thacrack3r 1 year ago
@thacrack3r come on you gotta admit that it is. The whole screaming and growling vocals you know it is.
Ironsixx 1 year ago
@Ironsixx No. What about folk with their soft vocals? You could say they're all wusses. People just dig the intensity of the sound. Those who don't like intensity wouldn't like it. Like I said, I really think it's just a different sound (or style of expression).
thacrack3r 1 year ago
@Ironsixx Music is way to express yourself. I don't know if true music lovers or musicians would make such statements. I love music.
MKimXP 1 year ago
i play thrash metal and i want to buy this pedal to get a more scooped sound,does this version has any difference than the kerry king version??because this one is cheaper....does the kerry king model work better for thrash kind of sound(just because it is kerry king's model) or there is no real difference???
Podarias 1 year ago
@Podarias the biggest difference is that the KK version can be used in stereo. other than that, i never noticed much difference
kornklone 1 year ago
does it have a true bypass?
screw66 1 year ago
@screw66 Im pretty sure.. Ive noticed alot of MXR pedals have that Button, which i believe is a 3PDT switch. Which means it Should be true Bypass.
jaki54321 1 year ago
@jaki54321 thanks
screw66 1 year ago
@screw66 yup yup =D
jaki54321 1 year ago
i like the way he headbangs using his beard
mrlgsn 1 year ago
Just ordered an MXR 31-band EQ. Hope it sounds as good as this 10-band when I hook it up!
TheZombieRitual 1 year ago
this guy can bang his heart!
horseman863 1 year ago
I Paid the few bucks more & got the Kerry King model. It has 2 outputs.
KevinFL 1 year ago
nice beard!
derdude 1 year ago
2:20 ... epic...
kebekoi66 1 year ago
You can use it without the 18 volt adaptor?
Typhoonhack 1 year ago
Is this noisy?
posiedonpowertrio 1 year ago
what do you do with your amp's EQ when using an EQ pedal? all at 0?
ilikecheese1011 1 year ago
@ilikecheese1011 You can keep your amps EQ alone & play with the MXR EQ. Always put it in your effects loop for the best effect. Hope this helps
KevinFL 1 year ago
that second clean tone sounds exactly like metallica's cleanss
wolfeman85 1 year ago
i got this pedal today and i plugged it to my Marshall MGHDFX100 and the sound went from a Marshall MG to a Marshall JMP! my amp sounds waaaaaaaaaay better now. Classic Tone i give this pedal 9/10
lonerocker08 1 year ago
There's no reson for the Kerry fucking king one.
broodwar1 1 year ago 12
wow congatulations on having a decent demo i dint really like the metal tone but atleat scooped mids and cut mids werent your only two settings haha
skillet000red 1 year ago
thin sounding sc???
44eelz 1 year ago
For anyone who really wants to hear how this sounds, I honestly suggest going out and trying to find the pedal itself at your local music shop and sitting down with it for at least 10 minutes. I have one in my Triple XXX's FX loop and it does make a difference. You just need to have patience with any pedal and remember, any pedal will change your sound depending where it sits. It's true.
njmithra 1 year ago
yeah dude nice demos....
akunmano 2 years ago
The demonstrations are identical with the KFK version! What da fuck
Paulaum1 2 years ago
This has been flagged as spam show
the thing that sucks about this video is you don't know what pickups or amp he's using. does anyone have this, or the KFK version that uses it for metal? i really need to improve my tone i'm getting from the distortion on the amp, but not to the point where i need a full fledged distortion pedal.
pensown11 2 years ago
get a line 6 pod 2.0 or XT its the best bet for good tone, that wont break the bank for any amp
CemetaryGatesML 2 years ago
@CemetaryGatesML But if you need to control it during a gig you need to buy an FBV Footpedal, and those things range from 150 to 300 bucks. Better off buying a POD 3 LIVE.
PRSseSinglecut 1 year ago
where in the pedal chain do you put the eq pedal?
Teutonic1250 2 years ago
it depends, if you want to change the sound of the Guitar, you put it right after the guitar (that is what he does here), now, if as an example your distortion is too bright, you put it after the distortion and modify the Distorted sound... and so on...
foxthewolfie 2 years ago
Funny how this is the best demo I've seen all night and yet when you watch the 6 band it sounds like crap. I guess that's marketing. Getting you to buy the bigger one. Enjoyed it all anyways
hypnoxic 2 years ago 14
@hypnoxic why would anyone who wants an effective EQ buy a six band anyway?
TheFunnyzach 1 year ago
Can someone please tell me what an EQ pedal does i have been wondering for the longest time.
firegeek22 2 years ago
It would have been a lot better to show the distortion at the end with single coils. I guess the girth was B.S?
joesl8 2 years ago
You can tell this guy's reading off of cue cards.
mw0305 2 years ago 38
either that or a teleprompter.
d22587 2 years ago
@mw0305 "if i put glasses on they won't be able to see that I'm reading lines off of a card"
snapascrew 1 year ago
@mw0305 Thats why he got the sunglasses XD
236987451 10 months ago
eq pedals rule. If you want versatility in ur tone buy
topografer 2 years ago
i'm always slightly confused with eq pedals, would this pedal be worth using with my Engl invader stack... or should i just use the amps eq ?
dimebagalways 2 years ago
It just gives you a little more control. I first found this when I was using primarily an RG with EMGs, because they were hella muddy, and I wanted something to brighten it. It depends on what you want.
AllThingsGuitar 2 years ago
@dimebagalways
That's up to you. If you absolutely love your tone, don't get it. If you want to enhance or add to it, get it. EQ pedals are awesome.
JerkyChid 2 years ago
@asda6572 and @emeraldstudio,
no. no. no. no.
the distortion you hear is coming from his amp/pedals. the gain slider acts like post gain on a rack mixer for a studio or live rig.
Now, it will help an overdriven/distorted signal get more dirty but it will, in no way, get anywhere near OD or dist. ranges.
This is not an "all in one pedal." This is ten bands of EQ and nothing else.
1012musicman1012 2 years ago
what does this have that the 6 band eq doesn't have?
metaldrummer181 2 years ago 2
So this is basically a boost, overdrive and distortion pedal all in one? Looks cool, but i don't understand all of the frequency stuff. i'll probably try it out soon.
asda6572 2 years ago
@asda6572 il try to explain it to. This may sound gay, but think of your sound as a rainbow, made up of separate colors. And the colors represent the different frequencies. An equalizer lets you boost or cut certain frequencies to "shape" your sound. Many equalizers also have a level slider to use as a booster as well as an equalizer
mikejoanderson 2 years ago
hahah very nicely put ;P
SexyFuckingBeast1 2 years ago
@mikejoanderson thanks man, and ya btw that did sound gay lol but still man thanks from now on i will always think of it like that very creative! lol
firegeek22 2 years ago
I blew a nut wehen i heard the distortion!
emeraldstudio 2 years ago
forgive a probably silly question..but if you have a pedalboard warwick with 5 9v alimentation and one 12v would this pedal work?
Alessandoctor 2 years ago
No, unless you get a plug to combine two 9v outputs into one 18v.
paparazzi3p 2 years ago
no you need an 18v
Vexion193 2 years ago
I have one of this sitting after the Tubeking, and i love it. Never turn it off even when i need the clean tone, it made my sound alot better.
TheIcezy 2 years ago
your amps best friend :)
SoundOfAShark 2 years ago
is this good for solo?
FanSlash00 2 years ago
Is this good for using for my ENGL Blackmore tube amp? No distortion pedals just this and amp distortion? :D
zupanman23 2 years ago
does this act as a distortion pedal if the sliders are set right or to u have to run it over amp distortion?
vivalasexy 2 years ago
It can. I've got this on my board, and it's sick what I can do with it by just messing around with it.
t3golf 2 years ago
this is typically put in the effects loop of an amplifer. you need distortion on your amp for distortion, this is just an eq. it takes the signal from your preamp (amp eq, distortion etc) and changes it before sending it to the speaker.
zeemonkey187 2 years ago
is there an actual audible differece b2een this eq and the Kerry king one. like is the kerry King one heavier sounding or something?
Jb5258 2 years ago
So what do all those bands mean? What are the controls for mid? :P I am noob at this pedal!
InFuriatedShadows 2 years ago 2
lol. the stuff near the left is the bass. the stuff closer to the middle is the mids. To the right is obviously treble
ruffles272 2 years ago
im gonna use this so much.....that's what she said
OnlyByFishStandards 2 years ago
2:20 jizzz
rhysdigby 2 years ago
what would the best eq pedal be if I want to completely take out the high frequencies past like 6-7khz?
ScorchinBeats 2 years ago
well, i do'nt know the model name, but behringer has a rack eq for like 100 bucks that has i think 31 bands, no joke. that should take care of it. why would you need to take out that uch high end?
OnlyByFishStandards 2 years ago
You'd need to get a high-pass filter. Not necessarily the typical graphic eq slider type. It acts as a cut for frequencies past a certain point. EQ with sliders only boost or cut the frequencies alotted on the pedal/rack.
omina3 2 years ago
I know. Actually a low-pass filter, but I have no idea where to find one. Plus an EQ could help with other things eg. take out boominess
ScorchinBeats 2 years ago
Yes 15 and 31 Band EQ's offer more versatility but the MXR 10 Band EQ takes the 10 most crucial frequencies to guitar so the entire 31 Band EQ isn't exactly all the necessary to the average guitarist.
JordanSky30 2 years ago
Because all of that high end sounds really fizzy. It's pretty much noise.
ScorchinBeats 2 years ago
I have the six band it works great with my all valve Marshall. Don't expect this to make a crapy amp sound good. It will make a good amp sound better.
BTW: This guy sucks. When he TRYS to play fast the clarity and dynamics of the notes all all over the place. Slop.
chucke1963 2 years ago
which " all valve marshall" you got?
plummustangs 2 years ago
which is better this one or the MXR 6 band
TheKingGR3Gm 2 years ago
I would say this one because 10 is more than 6, and the more bands you have available to mess with, the more versatility and control you have over your tone.
samdtall 2 years ago
Does anyone know if this can be used on a bass?
dill359 2 years ago
yes it can be used on bass
RobLikesCereal 2 years ago
my EQ is better it's a Dual 15-band EQ from Radioshack and it's only $74.95!
DimeZakkEVH 2 years ago
wow 15 band? I thought 10 was the maximum...
guysapire 2 years ago
nope actually 31-band is the most pretty crazy huh.
DimeZakkEVH 2 years ago
Actually you can go stereo at 15 to each channel (maybe even more) and really create that custom tone you are looking for.
Kangsryche 2 years ago
its the same thing as the kerry king model just one single output
mm2fan 2 years ago
this is hilarious to watch
niiiiiiiiiiiiiiiiick 2 years ago
Boss EQ-20 FTW xD
MioJ0xD 2 years ago
i was gonn buy it, but i saw the 18 volt thing. nice beard tho.
Ifyousayso666 2 years ago
i think mine came with the adapter...either way it works in a dc brick or something like that.
arhall2 2 years ago
hey do u know if the 10 band eq
OZZYTS808 2 years ago
Fucking 18v adaptor ,where to buy it in Europe?
alenv3 2 years ago 11
πες τα ρε φιλε!...: Exactly!
fullofblood 2 years ago
but i think the pedal comes with it.
fullofblood 2 years ago 4
just go to a guitar store they should carry it
guitarman104 2 years ago
@alenv3 it think they sell it together with the adaptor , if not you can make it yourself
agenrahasia 1 year ago
@alenv3 thomann.de
Notlaugh 1 year ago