My problem with this software is "keeping the lights on" after I pull up the landing gear. For some reason once the gear comes up....the lights are gone...737-800. I want to keep them lit until FL100 and when descending under FL100 without lowering the landing gear. Did anybody have the same problem? Got a fix?
@SilverS21995 I also had this problem. I turned on FSX and boom. 173 Liveries gone. I freaked just like you did. Now I remember correctly I uninstalled and went back to the original file that the software backed up for me. Then I moved that file to my desktop. I then installed the Shockwave software again. But this time I copied and pastied the aircraft.cfg planes into the new aircraft.cfg file that included Shockwave. It worked just fine cause the data was still there.
HEY THERE.I JUST DOWNLOADED IT AND INSTALLED IT.BUT THERE IS A PROBLEM.WHEN I WAIT FSX TO LOAD (TO FLY,NOT TO GET READY( ON SPLASHSCREEN),IT STOPS ON 100% AND THEN IT SAYS FOR A FATAL ERROR.HOW CAN I FIX IT?
purchased this and got screwed lost all my repaints and cant place any textures in my fsx folder but i can say this is a cracking really. well worth the money. but on the downside slave away and try to find words that say. fucking great but all my work on fsx is truely fucked. this is great but remember to back up your files prior to installing. .
@Shmaaaaa That would be very hard to do. They would have to document every single plane that has ever been made for FS10. You can add the lights onto your addon planes, though.
hey can you help me when i would installed it then comes a massage Shockwave 3D Lights Redux doesn´t find FSX or a file corruption is found in your FSX directory
Hello my mom has purchase this add on for me on her credit card and i had to recover my computer about a mouth after using it because my computer wasn't working. Dose any know what i can do to get my softwear back. i didnt get it on cd-rom
Check for instructions on how to recover the software in the e-mails sent to you by the seller when you bought the software. They will probably have a way to hook you up.
you guys were right, I jumped the gun on my comment. It is a bit of a pain to get it all working, but well worth it. This add on is fantastic! Glad I purchased it.
Another flaw that I found is that the Landing lights cannot switched on when the landing gear is up. It's very annoying not to be able to illuminate the skies in front of you while under 10,000 feet.
The most important thing is the tail light. In FS2004 it is clear that the tail light illuminates the tail that made the airline logo clearly visible. In FSX however, the lighting just made the tail glow bright while covering the airline logo in bright light. So in FSX the lighting hides the logo making it hard to see...
I don't see any improvement here...Maybe you should improve it..Other than that, quite allright.
Again this depends on the Airline and the Aircraft as many do not have tail Logo illumination in the Sim or in real life but many do, this may be a constraint of how FSX and FS2004 place and handle light textures and effects.
Some have no more than a clear white light with AC Strobe in some cases/
If you've got the money (i believe it's about 15 bucks?) then this mod (and especially the accu-sim B377) are WELL worth the money. They make FSX and related so much more awesome.
My problem with this software is "keeping the lights on" after I pull up the landing gear. For some reason once the gear comes up....the lights are gone...737-800. I want to keep them lit until FL100 and when descending under FL100 without lowering the landing gear. Did anybody have the same problem? Got a fix?
Dagrnig0730 1 month ago
@SilverS21995 I also had this problem. I turned on FSX and boom. 173 Liveries gone. I freaked just like you did. Now I remember correctly I uninstalled and went back to the original file that the software backed up for me. Then I moved that file to my desktop. I then installed the Shockwave software again. But this time I copied and pastied the aircraft.cfg planes into the new aircraft.cfg file that included Shockwave. It worked just fine cause the data was still there.
Dagrnig0730 1 month ago
Hi! I have a very popular problem... the black squares... how can I get the update to fix it?
edenbriand8 1 month ago
HEY THERE.I JUST DOWNLOADED IT AND INSTALLED IT.BUT THERE IS A PROBLEM.WHEN I WAIT FSX TO LOAD (TO FLY,NOT TO GET READY( ON SPLASHSCREEN),IT STOPS ON 100% AND THEN IT SAYS FOR A FATAL ERROR.HOW CAN I FIX IT?
SilverS21995 7 months ago
purchased this and got screwed lost all my repaints and cant place any textures in my fsx folder but i can say this is a cracking really. well worth the money. but on the downside slave away and try to find words that say. fucking great but all my work on fsx is truely fucked. this is great but remember to back up your files prior to installing. .
jodonbaker43 7 months ago
HELP!!! : after i installed this , lights became squares!!! what 2 do?
sam9524 8 months ago
It would be awesome if it replaced every single landing/taxi lights. It only replaces the lights on the default planes, not addons.
Shmaaaaa 1 year ago
@Shmaaaaa That would be very hard to do. They would have to document every single plane that has ever been made for FS10. You can add the lights onto your addon planes, though.
cartuner555 8 months ago
This is nice but made my light go square =/
LDP555 1 year ago
This is soo amazing!
FSXFS2OO4 1 year ago
where can I get those ?
VivaLaEmil1 1 year ago
hey can you help me when i would installed it then comes a massage Shockwave 3D Lights Redux doesn´t find FSX or a file corruption is found in your FSX directory
PLEASE HELP ME
petha12321 2 years ago
@petha12321 i had the same problem but my FSX it`s fixed now.Google for FS_Registry_Repair.exe.Enjoy your redux it`d relly cool
piromoretta 1 year ago
@piromoretta ah ok but a have installed my fsx new and then redux run :-D
petha12321 1 year ago
@petha12321 insted of reinstall i fix it much more easy for me because i have to many addons on my FSX it could take me 2 day to reinstall everything
piromoretta 1 year ago
how your config the lighting of fires of Landing on a person because they are lights of yellow Landing, help me please
dylandu59760 2 years ago
does it install automatically to ai aircraft? because I dont see any difference
B787YV 2 years ago
this works with REX??
InfiniteSaviour49 2 years ago
Hello my mom has purchase this add on for me on her credit card and i had to recover my computer about a mouth after using it because my computer wasn't working. Dose any know what i can do to get my softwear back. i didnt get it on cd-rom
p3droluis4life 2 years ago
Check for instructions on how to recover the software in the e-mails sent to you by the seller when you bought the software. They will probably have a way to hook you up.
AdamB9098 2 years ago
kool thanks i got it back yeaaa lolz
p3droluis4life 2 years ago
like an advertisement
rewindablender 2 years ago
B747-400 When i raise the landing gear the landing lights turn off but i need them on below 10,000ft
Speedster159 2 years ago
you guys were right, I jumped the gun on my comment. It is a bit of a pain to get it all working, but well worth it. This add on is fantastic! Glad I purchased it.
whiskeyportal 2 years ago
is ur addon planes working with the this 3d lights addon? cuz i heard it only works on the stock planes u have in fs9 and fsx, plz reply ty
Necrommancer 2 years ago
it works on add on's. read the manual and it explains how to do it. you have to add it each plane you want it to work on. it's great
whiskeyportal 2 years ago
well lol i cant find the manual, i only have the setup file, i need to put them on my addon planes and traffic
Necrommancer 2 years ago
Comment removed
whiskeyportal 2 years ago
Not for me, just copy and past a aircraft into the folder where you installed 3D Lights Redux.
privatealeks 2 years ago
go to the forum of the 3d lights redux website...there is a list with the lines that you need to add for every aircraft...pmdg, wilco etc...
NSRacerMods 2 years ago
Comment removed
shadddey5 2 years ago
is not installed on traffic!
B787YV 2 years ago
I had problem when I installed it messed up my panel in my default 737-400. So my ? is do I have to have default panel for that?
gafalcon7 2 years ago
is this (payware) or (freeware)???
policecrownvictoria 2 years ago
payware
PenguinRCFlyer 2 years ago
i installed it but it works only on the default aircrafts!!! can i put them on my addons???
petetongdj 2 years ago
I think it works only on the default aircrafts :S
MrTurkishair 2 years ago
this is off Shockwaves web site.
(Lights can be added to any 3rd party aircraft)
Hope this will help.
tacticalxd45 2 years ago
Cool! But what about fps?
racinglad 2 years ago
I get a 1 - 2 fps drop with it, but it is really worth it.
Fishcookied 2 years ago
a2asimulations\com
uploader1010 3 years ago
Another flaw that I found is that the Landing lights cannot switched on when the landing gear is up. It's very annoying not to be able to illuminate the skies in front of you while under 10,000 feet.
TommyIrianto 3 years ago
Landing light is just that mate a landing light, you need flood at height so your visable over a wider angle.
Under carriage being retracted is irrelevant as many Aircraft have their Landing lights fixed to the Gear.
mozzmann 3 years ago
just change the code in the panel . cfg, it says how in the pdf user manual
Jazza159 2 years ago
To be honest, this is COOL !!!
But there are several flaws.
The most important thing is the tail light. In FS2004 it is clear that the tail light illuminates the tail that made the airline logo clearly visible. In FSX however, the lighting just made the tail glow bright while covering the airline logo in bright light. So in FSX the lighting hides the logo making it hard to see...
I don't see any improvement here...Maybe you should improve it..Other than that, quite allright.
Great job.
TommyIrianto 3 years ago
Again this depends on the Airline and the Aircraft as many do not have tail Logo illumination in the Sim or in real life but many do, this may be a constraint of how FSX and FS2004 place and handle light textures and effects.
Some have no more than a clear white light with AC Strobe in some cases/
mozzmann 3 years ago
If you've got the money (i believe it's about 15 bucks?) then this mod (and especially the accu-sim B377) are WELL worth the money. They make FSX and related so much more awesome.
Keys879 3 years ago
how do i install them on my aircraft other than the default?
neper1982 3 years ago
Maybe it's in the manual , i'm going to read it now ;) I tell you when I know more !
Stefan0n9 3 years ago
dude i installed this but everytime i turn on my landing lights, its switches itself off immediatley, any help?
locdown120 3 years ago
does it hit fps?
brackan 3 years ago
absolutely NOT.
I just need to figure out how to add it to my 10000 add on aircraft
cinkmoot 3 years ago 2
me XD ther work on a beter way to add on to add on aircraft
crazystuffproduction 3 years ago
Sir, each aircraft has its own aircraft.cfg... how can you ask for a generic light section for FS2004??
smartalpha 3 years ago
What do you mean?
valkyrie321 4 years ago
only for FSX?
perom18 4 years ago
Affirm.
valkyrie321 4 years ago
That's a negative. It's available for FS9 as well now. Check out their website.
Jigsaw407 4 years ago
Yes, it was just recently made to work with FS2004 within the past couple of days.
valkyrie321 4 years ago
would it work with FS9 at all?
737NGFO 4 years ago
unfortunately not :(
mikeportnoy84 4 years ago