id use kerosene on a kleen surface then soapy h20 then fine steel wool with more kerosene then sopy h20 with wet sand from 2-400 basicly the old school restoration way. then work it up to 6-800 grit mmmmm. marbs.. and then finish with plastic polish till its newer then go with car wax carnuba like 4 times .
I got like dried up dirt all over under my fender and around the engine and shit, I can just take a hose to it can't I? And it'll come off after enough spraying?
its not about if there white lol just clean ur bike after uve riden thats why it stains.. n if theyre scratched buy new ones.... besides looooaaaadss of ppl have graphics on them anyway
How about a pressurewasher, some purple power, soap and waster, dry your bike and use car wax on the plastic. The wax makes it easy to clean everytime.
products like goo gone are used for stripping paint among other things but not for plastic that has zero paint or other shit on it, soap and water works great. scrub your plastics with a brush and wallah! spending 5-10 bucks for that shit is a waste....
dude, i undertand your trying to clean up your bike, but man a pressure washer is a much easier may. invest in one now and it will last a long time, you will get your money outta it
you might also want to spray WD-40 on the under-side of your fenders. it really helps keep the mud build-up down. you can spray all of the plastics with it, but it will make it slick.
wow henry i think u have a speaking problem, you called this so called "goo gone" like 5 different names same of them not even words like goof off a=how bout u get a pressure washer retard
How to transfer dirtbike grime reactivated with solvent to your pajamas, hands, arms, face, and parent's carpet and then leave the bedroom smelling like orange oil for days. Remember, it's a "dirtbike" not a "cleanbike."
You can get rid of fine scratches. just clean the plastic, wet sand with a fine grit sandpaper, use some rubbing compund to restore the color then spray some armor all on it or whatever you want to use
Clean plastics are also for people who take care of there things to the utmost extremes. I tend to spend just as much time cleaning my bike as I do riding it. When it comes to fixing and maintaining my bike, I would say I spend half as much time as riding. So 4 hours cleaning + 2 hour maintenance = 4 hours riding. That is just how I do it though.
yeah same here henzorator is a dick who doesnt know the value of money. i spend all evening with a rag and white spirit cleaning my plastics im even more paranoid now cus i got new ones lol
how about u just do wat needs to b done instead that 2 hours coz i know if u wanna do this stuff properly it takes longer then that coz u have to , wash it , air filter , gear box oil , check spokes, and just look over your bike for things that r broken
who cleans dirtbike plastics in their room in their pjs?
motocross19916 2 weeks ago
When I was working at a dealership they'd use a boat cleaner for the plastics and it'd work really good
orangesarerealgood 3 weeks ago
Haha quality, does your mam have a video of how to clean carpets on YouTube lol
leetwigg 1 month ago
would a cum rag work?
chad01ify 1 month ago
Did your mum know you were doing that on the carpet??
ryanrulez98 2 months ago
dud its called soap and water use it some time you wont have to do that crap its dirt for heavens sake
southerngoons 3 months ago
would, u, look, at, that...........
hellpup1987 3 months ago
no gloves and filling your bedroom with highly flammable vapors.. I hope your family doesn't smoke ; )
AccidentalBroadcast 3 months ago
@AccidentalBroadcast ha
southerngoons 2 months ago
@southerngoons right?... Booooooom. That would be awful.
AccidentalBroadcast 2 months ago
@AccidentalBroadcast i was waiting for that to happen he uses that stuff for no reason thats why god invented soap and water.
southerngoons 2 months ago
@AccidentalBroadcast Bi-Carb with a bit of water is the best cleaner!
MrMcMiniMidgetMan 1 month ago
id use kerosene on a kleen surface then soapy h20 then fine steel wool with more kerosene then sopy h20 with wet sand from 2-400 basicly the old school restoration way. then work it up to 6-800 grit mmmmm. marbs.. and then finish with plastic polish till its newer then go with car wax carnuba like 4 times .
anything7441 3 months ago
wtf? are you sitting in ur pyamas?
theQUICKDIDERIK 4 months ago
spray some lemon pledge on after your done to make the plastics look really nice, its wat the dealers do to make the bike shine
KLXmotocross 5 months ago
Isn't this why god created garages
kongakonga 5 months ago
@kongakonga no thats why god created soap and water
southerngoons 2 months ago
haha u are a goof off :L
MrNorton95 6 months ago
Let it sit there for around........ 5 seconds.
12345678simeon 7 months ago
gas works better
daswamps808 7 months ago
HAHA the carpet is probably just wrecked by now...
Lonnie91a 7 months ago
this guy sounds like he knows what he's talking about
LASTTOPGUN 7 months ago
Amature
Thesweetness412 8 months ago
you must beat off a lot
hellraizer2384 8 months ago 3
Hella sick flannels dog! Maybe it would be a better idea to do this in the garage next time? hahah
mayonnaisehater13 10 months ago
Just rub on some acetone it works good
MrBoygenis 10 months ago
your an idiot
vonzipper9999 11 months ago
This was great untill you got goof off on your white carppet and your mom kicks your ass
TACExtremeHD 11 months ago
very kwik wrist action. either lots of practice wiping fenders or somethin else....
MrKweeft 1 year ago
where do I find new plastics for my Rieju smx pro? pliz
runeblaster 1 year ago
I got like dried up dirt all over under my fender and around the engine and shit, I can just take a hose to it can't I? And it'll come off after enough spraying?
jetrider11 1 year ago
5 seconds? more like 20, i think the chemicals are fucking up your brain mann
justabec7 1 year ago
dude i find it funny as hell that you did it in your room :P!
DanteSD17 1 year ago
what a fuck up. you obv have no idea
146YamahaRacing146 1 year ago
if you come into the problem of painted plastics there is a product called Goof off graffiti remover.its in a aerosol can.it works wonders.
rm250fan 1 year ago
its not about if there white lol just clean ur bike after uve riden thats why it stains.. n if theyre scratched buy new ones.... besides looooaaaadss of ppl have graphics on them anyway
SAVAGEBASHER94 1 year ago
i just buff them lol
frnder 1 year ago
havn't you ever heard of water?
DubaiNoob 1 year ago
anybody attempting this how-to: do it in a well ventilated area to prevent the possibility of a fire from the fumes.
iPlaymeta1 1 year ago
You should rename this, how to clean up plastics and get high off fumes at the same time.
ArsenalSGL31 1 year ago 3
hes not coming back lol
Pancakeman4787 1 year ago
or pressure wash them like i do
McgillTristan 1 year ago
have you ever washed your dirtbike in your life jesus! AGREED MXNERDS4LIFE!
joelanddildo 1 year ago
20 bucks sais this kids rides a peace a shit 80...
mxnerds4life 1 year ago
Where do you buy Goo Gone?
Xx11HaloGuy11xX 1 year ago
can i use aceton?
budubum 1 year ago
ya that works just as well if not better...
motofreekstyle 1 year ago
Or you can jus spend a hundred bucks and have all new plastics. WTF would you paint you plastic for anyway?
rd2fst 1 year ago
If I was your parent you would be in so much trouble for doing that on the carpet!
Runcycle09 1 year ago
would this goo gone go better with coke or pepsi?
secretgardenproject 1 year ago
@secretgardenproject lolololol wtf??
burton6054 1 year ago
its good stuff, but seriously dont use it in ur bedroom
bmcrf250 1 year ago
Helpful video bro....
cremeegg1994 1 year ago
How about a pressurewasher, some purple power, soap and waster, dry your bike and use car wax on the plastic. The wax makes it easy to clean everytime.
ruhurt27 1 year ago
or you can just clean your bike after you ride everytime?
XoiLLM4tiCoX 1 year ago
you can buy googone like at canadian tire any store pretty much ! :)
hondadirtbiker97 1 year ago
hey guys listen from 1:13 to 1:16
wkwankers 1 year ago
clean yo rug nigga
syderpaintballer 2 years ago
rasist bastard
wkwankers 1 year ago
That is not Goof off that is googone, 2 completely differant companies
dirtbikebanana 2 years ago
wow! really ? your a genious
sloryder777 2 years ago
i could do that with piss
WTFvideoproductions2 2 years ago 13
@WTFvideoproductions2 chuck norris could no doubt!
181thor 11 months ago
At 1:15 does he say Get some more Goof Off?? HHAHAH
BKIPRODUCTIONS 2 years ago 2
for the scratches with dirt thats stuck inside or there stained. i soak my in bleech works pretty well.
Rmz250ryder 2 years ago
how the hell did you get your plastics that fuckin dirty really?
sportsman335 2 years ago
or just use a pressure washer :L
Kieron2710 2 years ago
i dont like to use pressure washers it can mess up seals.
foxracing279 2 years ago
how the hell can it mess up the seals if the plastics are off the bike?
Kieron2710 2 years ago
why did you say second thing twice? O.o?
idownloadedyoursoul 2 years ago
products like goo gone are used for stripping paint among other things but not for plastic that has zero paint or other shit on it, soap and water works great. scrub your plastics with a brush and wallah! spending 5-10 bucks for that shit is a waste....
warrior350yam 2 years ago
goo gone
WatchMeXplode47 2 years ago
how could you let it get that dirty?
mxbuddy595 2 years ago
works good, but it would suck if you spilt in on you carpet!
mxbuddy595 2 years ago
dude, i undertand your trying to clean up your bike, but man a pressure washer is a much easier may. invest in one now and it will last a long time, you will get your money outta it
ColinFerriss 2 years ago
lol init pressure washer way easyery
lol
motocross118118 2 years ago
where can i buy that
bulan0s 2 years ago
clean plastic but a hella goof off buzzzzz
killerkork 2 years ago
dame u must never wash ur bike or something becouse ther fucking dirty
srhkid131 2 years ago
you might also want to spray WD-40 on the under-side of your fenders. it really helps keep the mud build-up down. you can spray all of the plastics with it, but it will make it slick.
Vito145 2 years ago
u are such a retard: goo gone,goof off, gloof off
jossball 2 years ago 3
there actucally is shit called goof off shit works awesome for removing anything
FordsRule351 2 years ago
wow henry i think u have a speaking problem, you called this so called "goo gone" like 5 different names same of them not even words like goof off a=how bout u get a pressure washer retard
dirtbikeman102 2 years ago
kid please use this stuff outside .. you dont want to inhale that crap for long and ur pouring chemicals all over ur room .. that cant be good lol
AJslippery 2 years ago 18
lol, this is true, i dont think its good to inhale all thoose toxins man
LAXK1NG 2 years ago 3
Without being mean.... does anybody know how much a plastics kit cost?
22Attard22 2 years ago
about 100 for the whole set new
AJslippery 2 years ago
or you could line up all your plastics in a line and get a high pressure cleaner and then to get scrathes out use wet and dry sand paper :0
MrDH99 2 years ago
where do u buy the goo gone?
dirtrideryzrthebest 2 years ago
what kinda dirt bike do u have
snipersky666 2 years ago
what if you have stickers? Will that eat them?
CR125iswhatidrive 2 years ago
just use simoniz , or stuff to polish your car , i use it an it works great
works on everyting frame/stickers/plastic/rims
supermotardmario 2 years ago
How to transfer dirtbike grime reactivated with solvent to your pajamas, hands, arms, face, and parent's carpet and then leave the bedroom smelling like orange oil for days. Remember, it's a "dirtbike" not a "cleanbike."
lavawaterfalls 2 years ago 2
hahahah!!!!!!!
seriosuly..
upshift123 2 years ago
Dude, i mean no offence...but really, just clean bike...and you wont have to be scrubing your plastics, you cant get rid of scratches!
Mempker 2 years ago
You can get rid of fine scratches. just clean the plastic, wet sand with a fine grit sandpaper, use some rubbing compund to restore the color then spray some armor all on it or whatever you want to use
honcrf150 2 years ago
you idiots you can get rid of scratches with a hair dryer and sand paper, get it all hot and start rubbin
ni66awithaduffobag 2 years ago
yo i have those pajamas too mad omfortable right lol
fckbinladen 2 years ago
Plastic-X works wonders, give it a try!
Rikidybones 3 years ago
i just use paint thinner. gotta be carefull with that shit though. it almost knocks you out if you breathe it in really heavy
nickgr33n155 2 years ago
can you use thinners on your plastics if you have stickers
brettwill87 2 years ago
use plenty of solvent in a confined space and the pixies will help you after a while.
orangecat69 3 years ago
thanks for making this video, it works, and its good to see you love dirt bikes and look after them. good on ya mate
gazza70cr 3 years ago
He did the paper folding step to fast, I missed it.
flangmasterj 3 years ago
You just fold it in half three times
elemento1991 3 years ago
Oh phew! Cheers for that I was getting all flustered.
flangmasterj 3 years ago
might as well just use gasonline to clean it
chanch09 3 years ago
clean plastics are for pros or douche bags. If you dont make a living riding - stop fronting
Henzorator 3 years ago
and for peole who take care of there bikes and that realy appreciate what they have
chanch09 3 years ago 2
Clean plastics are also for people who take care of there things to the utmost extremes. I tend to spend just as much time cleaning my bike as I do riding it. When it comes to fixing and maintaining my bike, I would say I spend half as much time as riding. So 4 hours cleaning + 2 hour maintenance = 4 hours riding. That is just how I do it though.
Criztoferlee 3 years ago
yeah same here henzorator is a dick who doesnt know the value of money. i spend all evening with a rag and white spirit cleaning my plastics im even more paranoid now cus i got new ones lol
RallyMotoXfan 3 years ago
how about u just do wat needs to b done instead that 2 hours coz i know if u wanna do this stuff properly it takes longer then that coz u have to , wash it , air filter , gear box oil , check spokes, and just look over your bike for things that r broken
95yz125 2 years ago
wont that eat em?
whyzee125 3 years ago
where did you find the goo off from
kid356 3 years ago
what do you ride a 1924 xl220 or sumthing man just guy a new bike bro
fourstroked4life 3 years ago
lol i herd some one sign off aim hit me up my sn is crankhizzle
crankhizzle9 3 years ago
nice pajamas
jkrieck 3 years ago
dude nothing like chemicals and dirt in the bedroom rug lol dont let ya moms see this shes beat that ass
espltdm251playa 3 years ago
WOW! nice, what did you do to your plastics to get the backs that dirty??
MXBoy11 3 years ago
Someone had tried to paint the plastics black before I got the bike, and as you can see they did a crappy job.
MotoExcel 3 years ago
lol, yeah i'd say
MXBoy11 3 years ago
that works right nice...i dont think it'll help me much mine are creased and have really bright marks in them
sirmdaddy 3 years ago
guf off, paint thinner, gasoline,
YaMaHa2StRoKe 3 years ago
what else of stuff can you use besides gu gone
yammyrider08 3 years ago
dog crap
crapgeey 3 years ago
check out my yz80 video why did u delete all of your other videos?
crapgeey 3 years ago
Henry, has a 98 YZ80. What does yours have done to it?
MotoExcel 3 years ago
nothing yet.
crapgeey 3 years ago
lets see it then make a video of it and your cr80 crazychris
crapgeey 3 years ago
pj's are sweet!
curriep 3 years ago
Shit son you fast at wiping
338magbc 3 years ago