The Moe Joe Cell Stage3 Part 1- Spherical Joe Cell

[funnypickels]

Dude Explode the bubles! Take a messurement of the air gas being produced from your cell and for a v8 your looking for for a small 5 L of air gas production to increase the mileage of your motor . I'm looking for total hydrogen gas replacement.

[MosheDan9]

@funnypickels

There is a very subtle energy that the cell deals with. i used to explode the bubbles, but it was liking the slate clean of this energy, which can be called Orgone.

although i do have interest in producing HHO, it is not the intention of this video to display gas production as a means of running the car on HHO. it is simply to show how charged the water is with orgone in this state.

[MosheDan9]

@MosheDan9

errr, i mean wiping the slate clean.

[CharliePearll]

WHAT THE HELL IS A MOE JOE CELL???

[MosheDan9]

@CharliePearll

do a google search for moe joe cell and

my site comes up first. there, you shall know

all about the moe joe cell grasshopper

[SHOOTER0072003]

is it hho think is that hydrogen you keep calling it energy what is that energy called

[MosheDan9]

Qi, Ki, Prana, Orgone

[KKinsane2009]

for those who think your suposed to use salt, please DON'T, it creates sodium and chlorine [TOXIC] (salt being sodium chloride after all) there is a perfectly good substitute BAKING SODA.

isn't orme's to do with monatomic gold ? particles? don't see why that wouldn't work, being all neutral spinny, and if I remember my gold guitar cable was awesome compared to copper :)

I am interested in building a device, what range of voltage/amps is optimal at first in your experiences?

[MosheDan9]

agreed - not to use salt to get higher amps. better to use more voltage and purer water. also, yes, can use ORMEs. at first, getting whatever volts you need, around 60-90 volts, depending on ionic concentration of water, to get around 1 amp is good.

[Sloe1427]

Adding ORMUS instead of sea salt is much more effective at drawing orgone into the cell, because it's the ORMUS traces in the sea salt which makes it effective. It can be a little steep, but atlantis alchemy and zp tech have pretty pure ORMUS (originally marketed as a dietary suppliment... Thanks William Reich) which works well at keeping a higher charge and rate.

[MosheDan9]

I am familiar with ORMEs... it'd be interesting to see what that would do. but the cells do not require any salt at all, certainly not sea salt, which i have never used, and would not recommend to anyone. Wilhelm Reich also had absolutely nothing to do with ORMEs... It's Hudson's work, decades later.

[Sloe1427]

seperate but not mutually exclusive. ORMUS actually draws orgone because of the high spin. Thats why it works good as an additive in Ken Adachis version of the joe cell, which is based on the idea that orgone is what makes the cell work.

[dpatsiou]

Hi Moshe reading several things in your site I have a question, is it possible from your Spherical Moe - Joe cell to produce electricity in some way? I've read that the HHO that produce the device, if ignite it will produce electricity 3 times more and water due to implosion that take place (Don't worry I know that HHO is not the main point of the device but the orgone or aether that produce. But how we can produce electricity from orgone/ether?). Is it possible by using a coil? or a Tesla coil?

[MosheDan9]

I do not know if it is possible. I think it is. I feel it is. I have not gotten to that point yet. But using quartz crystal within the cell may be a key to electricity production.

[fuelban]

pieso crystal is only an amplifer. dependant on input, external input.

[dpatsiou]

Hi Moshe,I've read,the theory about trinity(electromagnetism & gravity) in operation with the water & generally your work.

I trully find it very innovative and interesting!!Bravo!!!! Keep up the good work that few people try to do in this planet.

[MosheDan9]

Thank you very much!! I appreciate your sharing. Especially with lots of attacks on my work all the time... it's nice, what you share. :-)

[AlchemistShaman]

yeah I agree that the tube shape of the Joe cell was never a good design. A sphere makes much mor sense.

[CSBuck1967]

nice

[Vistal1]

Does the joe cell procuce 1.7l per min . No clue how you figure that the inside the cells dont produce electricity when lelectricity will flow throught the Stainless on each side. A HHO cell will produce Hydrogen and Oxygen and dont use baking soda use LYE baking soda will clog up your water and produce a bad gas.

[MosheDan9]

Vista1, the moe-joe cell is not a gas producer. we do not work to produce gas. that is another technology. The signs of HOW the bubbles appear just indicate how charged the water is. how high its surface tension is.

[m34tl0af]

Huh? Lost magnetic field? Organite? Spheres? Negative radiation? What the hell is all that jarble? All you're doing is producing hydrogen from electrochemical reaction? Same as Joe cell, separation of elements is all! Go back to class!

[Lucidtomr]

I see... this sorta reminds me of Vanadium, like reducing free radicals and neutralizing bad energy. This is interesting, but it also reminds me of the CIA with mind control, though this is good, unlike the CIA's use which is bad. Do Moe Joe Cells have any affect on electronics? Static fields? etc? How about human health? sorry, I'm just learning about this.

I agree with you, this seems alien tech like, but yea, it's been around for a long time.

[Kitt0000]

Good vid, have you experienced any strange effects from touching the charged liquid? Science can be cruel, Radium for instance.

[MosheDan9]

Hey... yes some strange effects. Like touching the water or the steel during or after charging, can leave a tingling sensation in the finger, like IT is charged and it takes a while to go away. Other than that, only good stuff.

[MosheDan9]

Oh i see. Interesting synchronicity. Just had the very same question from someone else. Answer: not yet. Any ideas?

[queennabber]

magnetic properties  are induced by the drilling process

[MosheDan9]

not much. an acceptable amount.

[alayafire]

hi why not try gold colloid as a super conductor,using the underwater arc method, also look at viktor schauberger (spelling?) he energised water with the egg shape, i've made ormus think that colloid would work better here...

[arersilnar]

gold is not a superconductor...

[dleemm]

Sphere is good thought,how about the pyramid shape,something the ancients knew,worth an experiment ??

[Hellrazor0628]

Ho my god he love balls. :-) it a joke. well my problem with this is the buble is very fun but the quantity of hydrogen oxygen is not very impresive for the amont of power used to produce it what was it 68 wats for cople buble. i think that the cylider designe was a litle more eficient

[MosheDan9]

This is not a hydroxy fuel generator. It is a spherical form of the Joe Cell. The bubbles are a sign of the water being charged, having an increased surface tension. Charged with orgone.

[Hellrazor0628]

HA ok well I do not know mutch about phy. but when I was loocking at it I was Hoping for a way to kikc the ass of Petrol or at least try bu this was not it. :-( I'm trying to find a way make a good hydrogen generator.

[klas2k]

Have you tried yet to extract the energy ?

Not by enlightning the hydrogen that is ?

/K

[MosheDan9]

yes i have. See my video on "Moshe's Healing Chamber" - That was one way of extracting the Energy. 2nd is with a car. Getting there.

[stallman76]

hey have you ever heard about ormus (white powder gold)? I was wondering if a Joe Cell was some way producing some to type of ormus. For fun reading look up ormus and post what you think.

[MosheDan9]

yes sir. i have heard of Ormus... used to work on the chemical method for producing. Bougth shares in David Hudson's ORMUS production company. I think, in essence, the joe cell is creating something similar to the ORMUS - a balance between male and female. other than that, they are very different animals.

[Nephus]

The moment you start talking about male energy and alchemy, all of your credibility goes down the drain. The worst part is, this cell isn't even performing that great. There's no practical use for it. I've seen some of Meyer's work, and it's truly amazing, but this, along with the heavy dose of pseudoscience, almost makes me distrust the whole thing.

[MosheDan9]

hi, you're free to distrust whatever you like. I use the alchemical explanations because that is the way i see them - being an alchemist and all... i am not here to try to convince you or anyone about the scientific validity of this technology. the truth is, i have no doubt about it, as i can continually experience its effects. we will come to find scientific explanations for all things, in time, but for now, best to keep an open mind lest you end up a boring old armchair warrior.

[rsreeve345]

I've been viewing these "Joe Cell" videos, both the cylander and sphere types. My question is, and i think the answer to this will eliminate quite a few of the questions and accusations of others, how exactly is the "excess energy" tapped?

[kikaram]

How it would go to function, using the effect of the INERTIA, using to advantage the electricity of the water?

[psammons]

Have you though about using a toroidal design?

[MosheDan9]

Do you have any links to pics or descriptions depicting the toroidal design?

[psammons]

I wasn't saying it was a good idea, just asking if it has been pondered. Toroids are odd things especially when it comes to magnetism. But we're not trying to magnify the forces here, we are trying to cancel them right? right?

[MosheDan9]

Yes, you're right. We're trying to cancel some opf the forces, and amplify some others.

Cancel electromagnetic field and amplify radient energy, or orgone...

[psammons]

hmm that mystical orgone. Anyway.

For a cell like a Joe Cell, there is current running from the base of the cell to the top on all plates by putting positive top outside pipe, and negative on the bottom centre pipe. This creates an anti clockwise magnetic field (right hand flux rule) as viewed from above and exists between the plates in the same direction for the whole cell. I assume there is also induced magnetic fields created from the electron flow from plate to plate.

[MosheDan9]

This applies to the standard Joe Cell - with my moe-joe cells, it doesn't work in that way, because it is spherical.

[psammons]

no, teh spherical one will still exhibit the same induced field from the flow withing the plates, but more like a ball rather than a cylinder. its the field created from the electron flow from plate to plate that you are changing there. and I'm not sure what that looks like.

[MosheDan9]

Me neither. :-)

[psammons]

There is a magnetic field created around a wire as current passes through it right... What happens when that wire is a tube? Is the field on the inside or outside? I would think on the outside. I will have to test it. What happens when it is between two flat plates? created around the perimeter of the plates right? so when you have a JC or a spher, that field would cancel right?, but not the field from current through the plates.

[MosheDan9]

I don't think it is so much as canceling, rather than combining together the negative and positive, or male and female, to create the balanced neutral... which is not nothing, what we would call, cancelled, but the balance of the two that makes a third energy, that is undefined, and somewhat neutralized to our conventionally dualistic eyesight.

[MosheDan9]

i believe the field is on the outside and the inside. the field created looks like a magnetic field with four poles as per Walter Russell's drawings of the four poled magnetic field. so some of it has to fold inward, inside the tube itself. not sure about the plates.

[heliraptorcbm]

no sir i'm waiting to get my vertical mill-laith to star my work i just do a lot of thinking we are are tyring to seperate the constichuant atoms the higher the kz the better any electrical feild imparts a wave relitive to it's hz or kz if thire news theiry on string theirry is correct then all matter is composed of waves :-)

[heliraptorcbm]

ah try tesla coil powerd by micro wave high voltage transformer

[MosheDan9]

Do you have a link demonstrating what you suggest here? ie - Tesla Coil with microwave high v. transformer?

and can you suggest why you feel this is a good idea?

[MosheDan9]

about the spheres: there are many places that do "metal spinning." that's what you're looking for. Maybe you have a local supplier of spheres. I use mostly stainless steel type 316 or 316L.

[xassxass]

all this is brand new stuff to me! I dont even get the purpose. Bobles in water-ill fart- but guess thts not the point:) Im excited to go deeper into this material cos its sounded quite interesting. Where did you get the spheres from? been looking for those for ages`? thanks keep posting

[ssuperpablo]

you should build an orgonite device that's a bit larger than the one you show. Having orgonite close to the joe cells cancels the interference of DOR(dead orgone radiation) and makes the cell more stable

[PlyrZnrgy]

You sir, have a voice and mind for YouTube!!!

[MosheDan9]

thanks a lot, and thanks for checking out my videos!!

[cromagnon35]

Energenic feeling in the air?!? must be an excess of oxygen! ;-)

[OnlyGoodwin]

Have you seen the video at

...archive*org/details/Joe_Cel­l_-_Two_Enthusiasts_1993-1996_­VideoCameraRecordings >?

It's a must see if you haven't. I just finished watching it, and was blown away. He creates reliable and repeatable results with multiple tube cell designs, and runs a car using only 7 plates and half an amp. Anyway, keep it up! And when you figure out how to safely rig this to a car, please can you write a 3 step manual for the rest of us? That would be awesome!

[ipctec]

I have a working cell...

see it on my site w-w-w-joecell-de

[MosheDan9]

Thanks for your comment. What you suggest would be another form of technology. The steam and massive gasses is something else. As I understand the moe-joe cell and the Joe cell, it is about creation of neutrinos, which, with a high voltage spark, will releae electrons, energy, and absorb heat (implosion).

[finbar1984]

joe cells are a lie!!!!!!!!!

[honda4004]

hi looks good can your supplier get you finely perforated spheres and then pas steam through under its own pressure it should produce massive gasses and especially if you hit it with a ultrasonic frequency of 42712.2hz as mayer states frequency and steam were invovled thanks