Try an additional small engine carburator for the water only. Im not sure but this may mean you need to have either a double reactor or tie the new carb into the exixting reactor. Phil
Excellent work. I tried to run plasma spark on my Honda 5HP gasoline 4-stroke stock (without GEET). But it kept backfiring. Are you removing the waste spark or changing timing on yours?
Does the plasma only work with 4stroke with waste spark, when GEET is enabled?
hi, to get dry vapor into your system i suggest you have a separate bubbler full of water and have hot air going into the bubbler and then run it into your geet reactor..
I just introduce water into the engine. I used water in the fuel tank and gasoline supply from a bubbler. With GEET+plasma booster I have no significant change (I have only RPM increasement). It's only worked in high RPM. When I open the valve to about 50% open (high water rate), the RPM goes down. It may give information that my GEET+ plasma are not enough to ignite water to get engine runs on water only.
hi would you try immulsifying the water into a fuel source (mixing) and also try microwave water this way as it will be polarised i think.also am told that if you steam microwaved water up through a copper and bronze wool filled tube and re condensate it you will get heavy water. just some ideas
very nice test, water vapor is a natural byproduct of hydrocarbon combustion, interesting stuff running a gas engine on diesel. very good wokr, lookin forward to more.
It may not enough to make a conclution about fuel consumption even I have some saving fuel on plasma+GEET. The effect (disabling smoke on exhaust) is the progress to prove increasing efficiency of combustion. With this methode we could clear convert a gasoline engine to diesel convinced.
how kV is to secure the diode, and the extent to A?
zak201 1 year ago
Try an additional small engine carburator for the water only. Im not sure but this may mean you need to have either a double reactor or tie the new carb into the exixting reactor. Phil
bearboneskentuck 2 years ago
Excellent work. I tried to run plasma spark on my Honda 5HP gasoline 4-stroke stock (without GEET). But it kept backfiring. Are you removing the waste spark or changing timing on yours?
Does the plasma only work with 4stroke with waste spark, when GEET is enabled?
Thanks
CowboyRX 2 years ago
hi, to get dry vapor into your system i suggest you have a separate bubbler full of water and have hot air going into the bubbler and then run it into your geet reactor..
kazuza9 3 years ago
Great work! i`am working on the same generator ,i get more efficiency thru heat equilibrium what are your temperatures on the generator?
aluka1603 3 years ago
Can't wait to see..
revizal 3 years ago
my work is also most finished...i'll show you what water powered engine looks like.
dreamyear 3 years ago
I just introduce water into the engine. I used water in the fuel tank and gasoline supply from a bubbler. With GEET+plasma booster I have no significant change (I have only RPM increasement). It's only worked in high RPM. When I open the valve to about 50% open (high water rate), the RPM goes down. It may give information that my GEET+ plasma are not enough to ignite water to get engine runs on water only.
revizal 3 years ago
hi would you try immulsifying the water into a fuel source (mixing) and also try microwave water this way as it will be polarised i think.also am told that if you steam microwaved water up through a copper and bronze wool filled tube and re condensate it you will get heavy water. just some ideas
honda4004 3 years ago
I'm trying to find the best way to vaporize water to intriduce on this engine.
revizal 3 years ago
Maybe with microwave resonance, as can be done with water to produce cold steam.
crippled82 3 years ago
Excellent as always, you leed the way with these experiments. Thanks.
ChrisPCrunchy 3 years ago
very nice test, water vapor is a natural byproduct of hydrocarbon combustion, interesting stuff running a gas engine on diesel. very good wokr, lookin forward to more.
d3adp001 3 years ago
It may not enough to make a conclution about fuel consumption even I have some saving fuel on plasma+GEET. The effect (disabling smoke on exhaust) is the progress to prove increasing efficiency of combustion. With this methode we could clear convert a gasoline engine to diesel convinced.
revizal 3 years ago
Excellent as usual Revizal!
7 min for 100ml of diesel in a gas engine is freakn awesome.... and NO SMOKE w/ the plasma!
Have I got that all correct? What conclusions are you drawing????
goldenequity 3 years ago