Added: 4 years ago
From: scottyboi12
Views: 33,600
Sort by time | Sort by thread (beta)

Link to this comment:

Share to:

All Comments (82)

Sign In or Sign Up now to post a comment!
  • is that larry the cable guy?

  • This guy is a scum bag.

  • This guy wrecked this beauty, and then sold the car to a member of b15u.com with a bad piston ring, stole the ecu out and said the tow drivers stole it (rofl) and make a mess of the whole wiring harness.

    He never deserved such a bad ass ride.

  • lets see those honda kids talk shit now ahahah

  • Lets see those hando kids talk shit now ahahaa

  • I think i just ejaculated nos at the sound of that

  • thats an amazing spec v

  • vq30det is fit in my sentra xe 2003 so is my question thanks

  • All the dollares salio the whole system .... this one well chingon

  • Hey man what transmission did you use I am definitely looking to do a swap like this?

  • that vq sounds really good.

  • What gearbox you using? Seems like a massive waste of cash, why not put it in an S13 or 14 and have a much nicer car all round?

  • why didnt u throw the VQ35 in the sentra man??? wouldnt the VQ35 put out a lot more HP?

  • you are a crazy mann...lol.........vq30det power on a 2743 pound car..ohhh...nice...how mutch u pushing to the wheel...

  • the vq30 on boost in stock form can hold 450 - 475 whp all day long, beating on it al lday everyday.. the vq35de wont, it may make it, but i wouldnt try running it all day everyday without having a spare.

    the 00vi is easy, find a 2000 maxima in the yard, its a black plastic manifold, remove the rod from inside it and you have a better flowing, higher volume manifold for 150-200 bucks, for 20 whp and a continuing power curve., well wroth it

  • @turbo96max

    It's got a full MEVI swap, now.. 00vi would have been nice, too.. but, my customer got his hands on a MEVI.

  • whats the advantage of this swap over the 3.5?

  • what you putting down at the wheels?

  • I'd rather have this engine in my spec v then the 3.5 quest or maxima engine. . .

  • Why?

  • Get rid of that intake manifold and find the 00vi, youll get rid of the power dive after 5800 and it will continue, you will also gain 10-20 whp. had the same setup on my max , was good for 393 @ 10 psi. This car with race gas (being that it claims built!) tires, and if the tranny doesnt pop, can run 10s. 11s can be dont unbuilt. would not want to run into this on the street. nice

  • you'ld be better off getting the upgrade manifold from nissan less hassle to install

  • turbo96 max where can i buy a 00vi and how?? what to look for???

  • WOW, I did not expect sound like that from a Sentra!

  • Comment removed

  • Comment removed

  • Thing sounds so sick! I bet that thing hauls serious ass.

  • travis is a hard man to get ahold of ive been tring to get some info on the VQ swap for a long time now but never get a response. but that swap it sick i want a turbo VQ35 in mine

  • What kinds of times and outputs do you get?

  • I soooo neeed a v6 transplant in mine like badly

  • the idle sound sounds like a muscle car!!

  • that is insane.

  • F***** SIC

  • man i bet that thing has torque steer like a mother fucker lmao

  • i always wanted to do this to my spec......too bad it is gone now.... :(

    How much was the swap?

  • very nice car. my neighbor has his sentra tuned up and has the same red front bumper as you do. His is very nice. It doesn't have outrageous body kits and spoilers like some ricers do. haha

  • FI-R is the name of my company, Forced Induction Racing. We installed a custom, mandrel bent 3" exhaust system on the car, with a magnaflow muffler.

  • Yeah, Travis is the VQ swap guru!!!!!!!!!!!

  • What kindof exhaust are you running? Killer car man, I'd love to do one of these swaps in mine. What's Fi-r? I've seen it on every one of these swaps.

  • Nice car man! How much hp does it have?

  • i took a video of my cars engine check it out, its only the 1.8l but i dont got the money for a big swap like that.

  • i got a question! what could i do with a 2004 nissan sentra 1.8L ?? can i upgrade the 2.4L if not to the 3.5? and i dont have a manual either...

  • Trav4011 is the man to get a hold of. He is the one that did the swap for me.

  • how much for just a stock motor swap

  • that turbo just looks out of place nice job though

  • dose it have to be a spec V? cuz i only got a 1.8L sentra with automatic trans...maybe i should just buy a new car lol

  • VQ and Boost FTW!

  • they are custom motor mounts

  • Its the 3.0l out of the last make maxima right? The base model ge right not the ones with the 3.5

  • Nice vid. Quick question do the engine mounts line up or do you have to modify/relocate them. I have a friend who blew the hell outta his stock engine (same car)from constantly red lineing.

  • rear wheel drive righ?

  • Nah, its a vq

  • Oh, I LIKE. Gotta post up some more track vids now...

  • Isn't it a VG30DE not VQ?

  • There is a VQ30DE as well.

  • He could have put to VE30DE in it. Forgot about that.

  • Maravilloso!!! es el primero que veo.... muy buen trabajo

  • now that's some smart shit for a light 4 door

  • Its wrong wheel drive...but cool!

  • already got the MEVI on :)

  • Nice Swap... Now you just gotta Swap out the USIM for a MEVI or 00VI.... and you will be set

  • that thing's nice man, got tourque?

  • i have a couple videos on the car and how it performs. but my computer doesnt read my camcorder... but soon soon

  • still waiting on the other vids.

  • Have you gotten anymore videos of the VQ30DeT in the Spec-v. I might do the same thing since its more worth than hooking up the qr25 with a turbo

  • Please take more footage of your car, i wana see the whole set up n listen to it drive, i also wana see how quick it is, please get back at me, beautiful car by the way

  • There is a kit some dude is making to fit the vq35 into the sentra. It costs around $4k and makes respectably 225-245 whp. (stock vq35 swap)

  • We offer turn-key VQ35 swaps.. prices start at 4995.00.

  • its facing the wrong way ;)

    but seriously, major respect for this swap, thats insane dude!

  • Thanks guys.. :) I spent a LOT of time building this thing..

    It's a VQ30DE engine, out of a 96-99 Maxima, and has a host of different parts from all different years of Maxima's and Altima's.. from 96 up to 04.

    Travis

  • Good Lord! you created a monster!

    that is the nicest sound i've heard from a sentra! nice work!

  • vq30 is the 300zx motor if im not mistaken

    good shit

  • no, that's the vG30. I think the Vq30 comes from 02 (?) Maximas, but I'm not sure.

  • damn it sounds mean!! by any chance do you have the dyno sheets for this beast??

  • Still sounds sexy

  • stupid question, but which engine is that beast originaly from

  • The car uses a Spec V 6spd with a Maxima bell housing, and JWT VQ35 FWD flywheel with a custom CNC'd CPS trigger wheel that mimics the stock VQ30 CPS ring.

  • Beautifully done. Same question, what trans are you using?

  • I can't imagine trying to get off the line with this beast. Should be pretty fucking sweet to open her up on the freeway though.

  • what trans are you using

  • great damn car.

  • didn't Travis say that this is probably the most powerful spec he's built?

  • but does it go fast??

  • ew scotty! gross. too much info!

  • :O  Come on Scotty i want to see that thing Run!

  • kewl

  • cant wait to see it in person!! looks great and sounds really mean thumbs up :)

  • I cream everytime i see this! =)

Loading...
Alert icon
0 / 00Unsaved Playlist Return to active list
    1. Your queue is empty. Add videos to your queue using this button:
      or sign in to load a different list.
    Loading...Loading...Saving...
    • Clear all videos from this list
    • Learn more