How to remove flash hider on JG M16 & M4

[ToXicHDNation]

what size alen keys? i cant get mine off cuz i dont have the right size wrench.

[AirsofterJeff]

Are the threads the same on all M4's?

[blueswin3]

@RPZB96 it's on the lower half of the flash hider it's black not that hard to find

[Squeaky3384]

fuck, y cant they just make it so u can just unscrew it >:l

[clinttech]

i have an Echo 1 stag-15 mod 4 for my first gun and THIS VIDEO helped alot. CCW thread and that pin is easily knocked out and use an allen key i forgot what size. it does knock inside the tip of the barrel just use anything really tiny like a cork board TACK with a little hammer and it went thru. thanks for this vid dude

[RPZB96]

anyone help i have a jg m4 and i cant find the roll pin

[Karl23extreme]

i got the allan screw off but how do you take the pin out?

[RPZB96]

O and anyone who cant drive the pin thru barrel. U might need to remove the actuall barrel cuz it might be blockin the pin

[RPZB96]

Anyone help! I have a jg m4a1 and my friend has the same gun as me and he removed the roll pin but i cant find the roll pin. The flash hider has threads and ive tried the melt the glue trick. Ive already removed the allen screw but i cant find the roll pin

[xdakinex808x]

can't agree more with u guys about the roll pin. cant pound it out with a hammer and its from evike so its not glued

[skaterkidTAS]

you suck

[NPeR1697]

Haha I tried screwing the screw out, but the hole was obstructed by glue... So I took my high powered drill and you know the rest. It was worth it. I can now mount a silencer or the metal Masada type flash hider on my A&K Masada.

[GOCANUCKSALLTHEWAYWO]

I have the same M4 u have but it does have a pin and i cannot drive it through

[777headshot]

is it hitguns or JG? my M16 came with a striped hex screw

[TacoLove1000]

i need help !!!!

[SEARCHDADDY]

Yes thanks i wanted to buy a supressor and i needed to know if it was counter clockwise

[Rechkalov7]

@SEARCHDADDY It's counter clock wise. It's also glued in factory and you have to remove the cap screw on the side before trying to remove it. Once the Hex head cap screw is removed you can start unscrewing the flash hider with a 3/4 key. I did it on my rifle, it took me about 3 minutes once i understood how to remove the screw. Now remember that if you put a mock silencer on it you'll have to put a longer inner barel unless you're going to lose precision.

[duperman91]

i cant get the roll pin out

[duperman91]

i cant get the lil roll pin out

[duperman91]

nice paint job

[SemperFiScout79]

confusing..u should do another vid where u show us how to get the pins out and stuff

[seniorkickurass]

thx soooooooooooooo much i had no idea wat tht little black thing on the left side was 4 but now i do thx a ton

[supersaiyangotenks]

what size allen key u use

[seniorkickurass]

@supersaiyangotenks 1.5 mm

[FinalTheory]

hes got chunky fingers lol

[chilllin96]

is the jg flash hider glued on?

[7491931]

yes

[Animeremixer99]

i have the 2009 version enhanced and it comes with a metal flash hider and i did everything you said and it still wont come off i even tried boiling it off with hot water and it still wont budge any advice on that?

[kungfuninja55]

I can't get the pin out please tell how to remove it

[sholedice8]

Nice paint job!!

[TravisRyan50]

Once you get the orange flash hider off, go point it at a cop.

[seeyditti]

how you get the pin out?

[seeyditti]

how you get the pin out?

[seeyditti]

how you get the pin out?

[L3G3NDARYK1LL3R]

could someone tell me where to look to buy a metal flash hider for the JG M4 as well as a metal grip?

[USMCborn2kill]

i have this gun

its the DPMS S.I.R right

i still cant remove the flash hider n e helpful advice..............

[Seankilos13]

Uhhhhh would this work on a D boys M4 its basically looks the same as the one in this Video. If any of you guys can tell me Please tell me.

[7491931]

i am not sure but most clones are pretty much the same.

[Seankilos13]

@7491931 ok cool and i canged my mind before i bought it i bought the JG M16A2..saved myself lolz

[SuperGuitar9]

Good Sir, this video was a great help although i still am not able to remove the roll pin. Is their a tool for this if so whats it called because i just cant get it out. And also once you get it off is it possible to get the front sight over the rest of the barrell because i want to remove it to make an integrated silencer which i already have ideas and materials for.

Thanks

[SuperGuitar9]

Sir, this video was a magnificent help as i had the tip of my gun submerged in a glass of near boiling water. I could have broke tha damn thing but this saved my gun...And i got the allen screw out but the damn other one is just impossible is there some kind of tool i need if so whats it called i tried everything i could find the appx. size of the thing but...idk it just wont come out. Im actually trying to remove the front sight so i can attach an integrated suppressor. Does the Sight come off?

[untulisc]

hey if it says 14mm positive then which way u turn to unscrew it???

[howdy5379]

@untulisc to the left

[ScottishSurvivor]

in britain it lefty loosy righty right easyer to remember if you ask me

[HaloTheRipper]

@ScottishSurvivor same in america but these guns are screwy

[iguanared]

Holy Hell. does anyone know what size allen wrench size i need. i tried .05, 1/16 was close and 3/32 was too big. does anyone know, please help me.

[stickkiller1]

i used a 1.5 and it worked fine

[djwarm]

but my fu**ing flash hider is of metal, i can get out that little pin... :S

[airsoftjgm4]

plzzzz just do a single vid of how to get jg m4 s-system flash hider off i cant get mine off!!!

[7491931]

If u look at my other vid yuo will c how to remove it .

[RPZB96]

@7491931 help i have a jg m4a1 enhanced and my friend has the same one and he recently got the gun and got the flash hider off. i already removed the allen key but ive looked all over the flash hider and i cant find the roll pin

[RPZB96]

@7491931 help i have a jg m4a1 and my friend has the same one and he recently got the gun and got the flash hider off. i already removed the allen key but ive looked all over the flash hider and i cant find the roll pin

[RPZB96]

@7491931 i have a jg m4a1 and my friend has the same one and he recently got the gun and got the flash hider off. i already removed the allen key but ive looked all over the flash hider and i cant find the roll pin

[XdarkangelX447]

will this work for a dboys s.c.a.r. ????

[7491931]

I do not know but most low end AGE are have the same flash hiders on them.I have a Dboy m 4 and it is the same ,so I wold say yes.

[rapidfireonthetarget]

thanks man you just saved my thread lol coz i was forcing it like a mo fo trying to get it off untill i watched this...sooo easy!!!

[CommunistCookie]

RIGHTY LOOSEY LEFTY TIGHTY, got it...wait what!?

[tylergoff]

it is a counter clock-wise thread

[ekem13]

can't get mine off i did both steps

[MP5rules]

Ther is still the glue on the newer models. Use a wrench to remove it..

[mrbluetongue]

same problem with me!!! how the hell do i get it out??

[Skytix]

same here too like i wanna remove the flash hider from my m4 and i cant get that little pin out.

[Skytix]

Ok same here i cant get that little pin out on the side of it can u help me out plzz?

[IrishSpite]

i hammered that little pin thats supposed to pop into the barrel until i thought my gun would break, but it just wouldnt go through, ive looked everywhere on the internet for how to take the flash hider off because i need to take off my front sights for a red dot scope, can you please help me out?

[MP5rules]

You dont need to take your front sights off for a red dot. Also, you dont need to remove the flash hider to get at the front sight

[Holyfraek12]

retart you have to take the flash hider to take off the frong sight

[IrishSpite]

i hammered and hammered that little pin forever until i thought my gun would break but it never poped through into the barrel, so can you please help me out?ive looked everywhere on the internet on how to take it off and cant find out how pleeeease help me

[mrbluetongue]

hey for ur jg to remove the frontsight with out moving the flash hider just take the hand guards off and urll see two little allen key things on the bottom near the delta ring there is one on each side take bothe of them out and ur outer barrel will slide right out and u can take it out the other side... tell me if it works!!!!

[chargers705]

wut size nail set?

[7491931]

the jg m4&m16 flash hiders are 14mm cc.

[hooramarines]

what is it 14mm counter clockwise on the jg m16a4 i realy need to no

[tylergoff]

Thanks again.