Ey I just got a 95 LS with a 108,000 miles going to put 2 3/4 inch lift on it. have new 16's on it will that work? any other feed back on this vehicle as it will be used in the desert..
i have a 97 blazer 4door,just bought brand new 31's bf goodrich for it,no lift required but thats as big as it can take without a lift..i wanna do a 3" lift and put 33's on it.
How do you possition the gas tank after the body lift? I have a 4 door Jimmy and if I put on a body lift I have to do something about the gas tank because its strapped from the frame to the underside of the body. Any ideas? What did you do?
Here's what I've found. You can fit 31x10.5 tires on stock rims and just rub on the frame. Now I have a 95 Blazer with a 2" suspension and 2' body lift and 31x10.5 with offset rims and I used to rub just by turning the wheel. By shaving off some of the back of the front wheel well I stopped the rubbing.
@jeungerford Hey there, I have a 97 jimmy (4door). Planning on getting a 2"body lift and 2" lift with torsion keys/addleafs what size tires could I run without rubbing? Currently I got no lift with American racing Outlaw 2 rims (bit more offset) with 235/75/15's on it (basically like a 30x9.50 only a touch smaller) It rubbed on the back of the front wheel wells when i turned, banged it in a bit with a hammer and painted it no rub, but with the raise will it actually help for the rubbing?
@armedlocation dude u can fit them with stock height mine is a 2000 lt 4x4 and i have 31x10x50 on it and the only time they rub is when i cut it extremaly sharp other than that i dont have any problems cause i wanted to make sure to because i paid 200 dollars a piece for mine...lol but u should have any probs with it
dude please help me out i have a 2000 blazer 4door LT 4x4 is that really a two inch lift with 31's if it is do you think my blazer would fit them fine with the same lift and do they rub at all i know it seems like a dumb thing to ask but guess work is alot of money lol i would think being 2000 blazer and a 1996 blazer are about the same fender size an all thx
@ARMEDLOCATION Sorry for the late reply, it has a 2inch body lift and 2inch suspention that we had to mod. It will not clear 31s without atleast 4 without major rubbage
With these blazers you can turn the front torsion bars up and add a 2" block in the rear and achieve the height required to run 31-10.50's. The do not strain the transmission nor do any harm whatsoever aside from rubbing in the front if the torsion bars arent turned up enough. I know this because i did this with my 2003 Blazer. Dont say it wont work.
I want to do the same thing to my balzer but i heard that the tires will be to much strain on the transmission. how does the engine turn the tires on the highway and such and ever had an transmission issues?
@nit8690 Sorry for the late response, the blazer has since died, it was rolled... The thing had plenty of power but only after a k&n intake, flowmaster muffler, crane cams programmer. And no those trannys are bullet proof.
Is that a 2" suspension lift or just a body lift? Ive been wanting to put some 31's on my 97 blazer along with a Flowmaster Super 44 and a light bar. Anybody able to give me some feedback?
@IWarMongerI A 2" "Suspension lift" is a waste of money. You can achieve a 2" lift by cranking the torsion bars and adding a set of rear shackles, that should clear 31's. You can use a Performance Accessories 2 inch or 3 inch body lift from the first gen s-10's on your truck. They are about the same. Total cost for body lift and shackles is about $150 check ebay.
Lift it, it's cheap and easy! Check out Treadwright (dot) com for 31x10.5x15's mudders for less than a 100 bux each!
@IWarMongerI With the 2 inch shackles and t bar crank plus a 3 inch body lift, it will easily clear 32/11.50's but with some fender trimming and some finance, you can fit 33/11.5's!!!
Check out Blazerforum(dot)com it's all about s-10 blazers!
Ey I just got a 95 LS with a 108,000 miles going to put 2 3/4 inch lift on it. have new 16's on it will that work? any other feed back on this vehicle as it will be used in the desert..
Thanx
Robert
puttr3 1 week ago in playlist More videos from 1996ChevyBlazer
alot of 4x4 blazers and s10s have 31x10.50's on with with no lift, like mine.
steven42718 1 month ago
@TheMrDyrdek no he won't as long as he doesn't let off the gas and keeps the backflow he is good
If he stalls then he's fucked
FoxRaceKid37 2 months ago
you're gonna flood your engine with the muffler under water
TheMrDyrdek 2 months ago
i have a 97 blazer 4door,just bought brand new 31's bf goodrich for it,no lift required but thats as big as it can take without a lift..i wanna do a 3" lift and put 33's on it.
cooter85 3 months ago
you can fit 31 under the s10 blazer without a lift you just have to cutoff a lettle bumber
SuperMuffey 5 months ago
I can put 31s on a blazer that's not lifted they just rub a bit
cjthoma89 7 months ago
How do you possition the gas tank after the body lift? I have a 4 door Jimmy and if I put on a body lift I have to do something about the gas tank because its strapped from the frame to the underside of the body. Any ideas? What did you do?
theproducersof 8 months ago
Are these 4 door blazers any.good off road?
ballerboy315 8 months ago
@ballerboy315 2 doors are a bit better but yeah
TheTechGuider 8 months ago
@TheTechGuider ya i want to do samething( inch lift) ya i wish i had the 2 door...somewhat
wowr90 8 months ago
hit the gas next time pussy
34celticpride 10 months ago
i've got a 99 with 2 inches of lift and can't fit 31's
MrBlazer9974 10 months ago
i wanna know whats under the hood
shaqtus18 1 year ago 2
I just put a 4" lift and 33's on my 97 blazer.
backwoodbassplayer 1 year ago
what kind of lift do you have a super lift or rough country? and are those 15 inch rims?
abasta4 1 year ago
I got a 97 blazer with 31 s on it with no lift it works just fine
applecbr600f 1 year ago
@applecbr600f what kind of tires do you have on your blazer.
tbrandlein 10 months ago
Here's what I've found. You can fit 31x10.5 tires on stock rims and just rub on the frame. Now I have a 95 Blazer with a 2" suspension and 2' body lift and 31x10.5 with offset rims and I used to rub just by turning the wheel. By shaving off some of the back of the front wheel well I stopped the rubbing.
jeungerford 1 year ago
@jeungerford Hey there, I have a 97 jimmy (4door). Planning on getting a 2"body lift and 2" lift with torsion keys/addleafs what size tires could I run without rubbing? Currently I got no lift with American racing Outlaw 2 rims (bit more offset) with 235/75/15's on it (basically like a 30x9.50 only a touch smaller) It rubbed on the back of the front wheel wells when i turned, banged it in a bit with a hammer and painted it no rub, but with the raise will it actually help for the rubbing?
Stingray7667 10 months ago
@Stingray7667 you could fit 31s but dont put swampers if you dont want rubbing. or anything with aggressive tread
tbrandlein 5 months ago
@armedlocation dude u can fit them with stock height mine is a 2000 lt 4x4 and i have 31x10x50 on it and the only time they rub is when i cut it extremaly sharp other than that i dont have any problems cause i wanted to make sure to because i paid 200 dollars a piece for mine...lol but u should have any probs with it
cjthoma89 1 year ago
Audio sucks, but a good video.
awful8484 1 year ago
dude please help me out i have a 2000 blazer 4door LT 4x4 is that really a two inch lift with 31's if it is do you think my blazer would fit them fine with the same lift and do they rub at all i know it seems like a dumb thing to ask but guess work is alot of money lol i would think being 2000 blazer and a 1996 blazer are about the same fender size an all thx
ARMED LOCATION
ARMEDLOCATION 1 year ago
@ARMEDLOCATION you can fit 31s at stock height!
lovemachinez28 1 year ago
@ARMEDLOCATION Sorry for the late reply, it has a 2inch body lift and 2inch suspention that we had to mod. It will not clear 31s without atleast 4 without major rubbage
rebelsoutherner 1 year ago
dis nigga is wack
gmoneymike8990 1 year ago
someone needs a snorkle...
beastlybooston 1 year ago
With these blazers you can turn the front torsion bars up and add a 2" block in the rear and achieve the height required to run 31-10.50's. The do not strain the transmission nor do any harm whatsoever aside from rubbing in the front if the torsion bars arent turned up enough. I know this because i did this with my 2003 Blazer. Dont say it wont work.
whatchagondo45 1 year ago
What kinda lift
AeRoSmItH101112 1 year ago
body lift or suspension lift?
sloppyjoefingle 1 year ago
I want to do the same thing to my balzer but i heard that the tires will be to much strain on the transmission. how does the engine turn the tires on the highway and such and ever had an transmission issues?
nit8690 1 year ago
@nit8690 Sorry for the late response, the blazer has since died, it was rolled... The thing had plenty of power but only after a k&n intake, flowmaster muffler, crane cams programmer. And no those trannys are bullet proof.
rebelsoutherner 1 year ago
Is that a 2" suspension lift or just a body lift? Ive been wanting to put some 31's on my 97 blazer along with a Flowmaster Super 44 and a light bar. Anybody able to give me some feedback?
IWarMongerI 1 year ago
@IWarMongerI A 2" "Suspension lift" is a waste of money. You can achieve a 2" lift by cranking the torsion bars and adding a set of rear shackles, that should clear 31's. You can use a Performance Accessories 2 inch or 3 inch body lift from the first gen s-10's on your truck. They are about the same. Total cost for body lift and shackles is about $150 check ebay.
Lift it, it's cheap and easy! Check out Treadwright (dot) com for 31x10.5x15's mudders for less than a 100 bux each!
DoErTillSheCumz 1 year ago
@IWarMongerI With the 2 inch shackles and t bar crank plus a 3 inch body lift, it will easily clear 32/11.50's but with some fender trimming and some finance, you can fit 33/11.5's!!!
Check out Blazerforum(dot)com it's all about s-10 blazers!
DoErTillSheCumz 1 year ago
Hey man, how did you get those light on the rack to work? Did you run them right through the bar and into ur car? or go on the side through a door?
MrPleasurepack 1 year ago
They fucken petrol dumb fucks
Tetw2012 1 year ago
wat lift kit do you have and take a look at my blazer
mrhawk1215 1 year ago
what 2" lift do you have
meeko1589 2 years ago
Doesn't that level of water damage the engine?
PeterShaker 2 years ago
i had a 97 jimmy in leather...and my wife had a 96 with cloth bcz of the children etc.
but you, my friend, you make that truck look really bold and kind of masculine.
AliAbraham51 2 years ago
how did you mount those lights?
stratgeek09 2 years ago
cool blazer man
kbn2quads 2 years ago
The light on you lugage rack how did you run them into the cab?
1989timmy 2 years ago
probably though the door
rustlerbadass 2 years ago