Blade CP

[Doamino41]

Awsome flying dude! It took me a couple of years of practice just to be terrible,,,lol

[potatogunguys]

you guys are nerds, nice song choice btw

[eeeeky]

Uuuuh...dude?? Im a sponsored pilot...did you miss that? This was flying with ALL CONTROLS NORMAL!! Watch my other videos...or go to my website...

Im a competitive pilot, having placed in 3DMasters, and XFC...jackass

[axelroach]

@eeeeky awesome video! i have never fliped my cp nor flown upset down. Any tips for doing this? How did u start flying inverted? Thanks

[wretchedmaniam]

Channels reversed on the TX to fly inverted, as it were rightside up!!! Trickery,,,,,Lets see a forward flip from rightside up to inverted-hovering, nose -in.

[Randylepipi]

* corecly

[mentalone1995]

@Randylepipi Correctly :D

[Randylepipi]

JUST Bad Your not capable to piro flips cirectly

[eeeeky]

@Randylepipi

Well, i think you mean "correctly"? And tell me exactly, who are you to say im not capable of doing piro flips? Im a sponsored, national champion, and can outfly most anyone. Im not trying to be rude, but im a pro pilot, i can do piro flips in my sleep!

[uselessmidget]

@Randylepipi

Your not capable of spelling good sir.

[helipilot727]

Looks like you may be flying with your collective and rudder reversed to fly inverted. I didn't see you go into idle up mode first, and you never flipped back right side up outside but caught it instead. Cheating :)

[eeeeky]

@helipilot727

Correct..have you ever flipped a BCP, not a BCP pro, but a BCP?! They dont flip fast, let alone fast enough to flip in the living room. NOTHING IS REVERSED, I AM FLYING WITH THE SAME SETTINGS AS UPRIGHT FLIGHT!

[Phoenix73nj]

sick flying man... that's a CP isn't it... not even a CPPro... damn...

[lazor222]

Dang I remeber when these came out. They were crazy. And then the CX.

[chrismofer]

either a 3-axis gyro,

good flying,

or all of the above.

[eeeeky]

Just skills!! Hehe, on a serious note, lots and LOTS of practice. No 3 axis gyro, no upgraded electronics. Was just using my 9c, with the stock mixer board, gyro, and motor systems. the only thing that made this heli fly so good, was hours and hours of setup and tuning:)

[chrismofer]

impressive.

[jojoviudez]

Is there something wrong with the heli? it only wants to fly upside down hehehe. just kidding....nice flying, i wish i could fly like that and now i miss my belt CP. I had to sell it before it drains my piggy bank lol. I'm stuck with a slow stick.

[22CRD]

this stock motor and pinion? 

8T?

[mowbo75]

very nice flying! is that the stock version or is that the upgraded version?

[watermelonboy100]

nice flying!!!

[miceonerone]

pitch gauge pitch gauge

[NEY310LA]

why i cant get my blade cp off the ground and with full open throttle, what coul be the problem. some one knows why?

[0TOM007]

Mabye your pitch servo is reversed, i dont own a Blade cp but a Belt cp, when you aply throtle, the pitch of your blades should increase to, if they dont, check your servo's

[soccerdsnake]

I just got mine and i had the exact same problem. what you need to do is adjust the pitch control link (find it in the handbook) by unhooking the circle part from ball and twist it so it extends. Do this to the other side the same amount of rotations and it should make a difference. Keep making adjustments until you have it perfect. Let me know if this works for you.

[RCEbooks]

Screw the toy: NICE HOUSE!

[dendog220]

this is why u need an extra tail rotor guarding post on the top...? :P

[windsurf7772]

should make it land up side down on the roof i have the same but with belt drive its in the shop for repairs. been in there all week i am sad i want me baby back so much.

[windsurf7772]

ya got ballls

[HeliPilot1180]

you´ve got balls, man!

[Nikx012]

Blade 400 is a Very kwl heli

[chuanist]

Hey Eeeky— what are you up to these days? Miss you on RCG.

Drop me a PM here.

[Someaznkid301]

can you recover flying upside down then back to normal flight? im planing to buy a Blade CP once i master my Blade CX2

[happypappykid74]

I wouldn't recommend the Blade CP its very unstable and can be jumpy at times you will end up spending a lot of money on it trust me, get a Trex 450 or even a 500 it will save you tons in parts and time waiting for things to ship. Its a very cheap model without some of the upgrades and if you get it you will spend as much on parts and the heli its self that the Trex would probably be close to the same price.

[Vanka472]

yes.

[seen53]

I keep cringing looking at this heli fly upside down in a living room with not very much room to flip over getting lower and lower... GREAT FLIGHT MAN! YOU GOOD! i got a AXE EZ (yea im a noob, big whoop wanna fight about it? lol) i want to mod it out once i figure out how to fly in my living room... any suggestions?

[eeeeky]

Im not using a gyro to stabilize it, only a gyro on the tail rotor, and its the stock rate mode mixer board.

[planes222]

is this your first heli and if not what did you learn on? nice!

[halo0413]

what kind of gyro are u using to stabalize it

[RevoPwns]

are blade cps good for outside?

[FailedSquare]

yes, they sure arent made for flying in your living room.

[RevoPwns]

thanks

[LukethedudeDesigns]

Nice flying but why didn't you ever flip it around in the air? A inverted hand launch and hand caught....not to cool looking. And I have a CP with the invert upgrade but it doesn't fly that smooth, you other upgrades did ya get?

[faapipercub]

there isn't enough room in the house to flip it over in the air

[LukethedudeDesigns]

At the end you were outdoors. Im getting a Blade 400 soon, cant wait for it. My CP blew up on a roll lol, it was awesome and I got a free 4 in 1.

[faapipercub]

oh yea, I just rewatched the vid and your right, but i think that it is harder to go inverted like that then in the air, but I may be wrong!

[eligs340]

get a t-rex or raptor more power and better

[longerino]

and about 4 or 5 times the cost, go for a blade 400

[trxspirit]

the 400 is worth it

its like a cheaper trex 450

[eligs340]

tp bad i can in a smaller space

[adidas22205]

no you have to add on stuff and make adjustments to make the cp go upside down

[stevodrummer99]

no you can do inverted right out of the box, without any adjustments except flicking a switch

[spart888]

do u have to get anything special to make it fly upside down or does it just fly upside down with nothing added on.

[austinfly14]

very nice.i got a blade cp pro.its my first heli.

[RevoPwns]

lol i have a blade cx2

[CyclingMagician]

heh I used to have a CX... then I had to sell it to get the CP Pro. I plan to buy a CX2 back sometime soon... hopefully...

[madeljacky]

Thats really cool man. You have given me a great idea how to get my twister 3D inverted in a tight space!

[nubb1337]

I'm thinking about getting this. is it a good heli??

[LaZyLuKe25]

yes..it may be a little hard for a beginner but its possible you migth want somew trainign gear to.

[eeeeky]

I was using my futaba 9chps radio, so i had a little more confidence in what was going on, but other than that, it is just the stock gyro, with the trim keeping the tail in relative position. Otherwise i was doing all the flying, just quick cyclic reaction was the key here! Hope i helped, any other questions feel free to ask!

Aeryk

[hvta53]

Hello,

I would like to know How you make your heli very stable in flight? Do you add on any Gyro to your

heli ? or you only re tune Gain & proportional trim pots? Your respond certainly appreciated.

[morkelito2]

awsome flying i wish i could takeoff with mine

[arcemadnes]

nice video and good flying

[lyclycsms]

nice flying... hope to see you make the heli flip inverted instead of hand launched inverted..

[tempelmeister]

Goo goo dolls - Iris

Beutiful :P

cool flying too :D

[eeeeky]

hehe, im always careful...those pics were on MY website, and they came from a GWS gearbox breaking and flying into my hand while hovering a foamy in the living room...go figure!

[miniheli]

Nice video eeeeky! Wacth out for those blades, I saw your injury on the web under your gallery.

[ocourtner]

how can u do that with out the idle up? i saw u start with no push any switch

[eeeeky]

yes, im really flying inverted...i could flip it over, and you would be able to fly it normal...the servos did not change, i was actually doing the same stick commands alan szabo would:)

s1th, the falcon is a shogun clone..and shoguns are horrible

[ocourtner]

hey u fly pretty good inverted but did u inverted the servos too for a normal fly ? or is a really inverted fly

[s1th]

THE FALCON 3D IS A SOLID HELI

[bladecx2star]

lol great flying

[eeeeky]

villas...ive done inverted blade landings (landing on the head button) and it doesnt hurt it at all...its a great tough little heli...and untill i see a reason to think otherwise...ill keep a thumbs up rating on the bcp. Heli flight, im flying the stock rx/4-in-1, but i was using my futaba 9chps that i use on my 90. Rygain, that song is by goo-goo-dolls, its name is iris. if you email me at eeeeky(at)eazytek(dot)com , ill send it to your through email.

[rygain]

hello, great driver

can you tell me the tittle on ths son please, it so good ^^

Enjoy

[HeliFlightRCU]

Are you flying with stock electronics (rx & tx)?

[villas07]

men you goin to be good "Heli pilot"if you can fly it

a BCP.

[valcan0001]

nice flying dude that going to be my next helicopter, I have the blade cx2 now

[villas07]

dont make a mastake,get any other 4 or 6 intermate

BCP break to much(bad quality)

[nicos808]

Gino, I really wanna see youi do it mate!

[nicos808]

I liked that, pretty cool man! I am def going to learn that! Can I say I thought of it myself?? haha

[eeeeky]

hahah, only one way to find out!! i didnt really care if i crashed, but i had my goals not to...

[ginopunsalan]

I wonder if I can spin my CP2 up like you did and lay it on the floor and do Radd.