question: at 2:20, didn't you find the current of the enclosed loop? not the current of the load resistor? To find the current of the load, you would have to use current division rule right? current-load= (I*2)/(100+2) where I=58.8mA. In that case the load current equals 1.15mA.
@amagicy Load resistor is that part of circuit you calculate all this for. Basically, thevenins method is used to calculate current on one specific resistor (the one that connects a and b on shortest way). So typically, you would have calculated entire circuit to get all the results (simplifying to lowest level and then using and then 1st and 2nd Kirfhoffs laws), while this way you need calculate just that one current related to one resistor (or other resistor like part like inductor).
Hi, you have to look from the LOAD side, where we disconnected the RL resistor. The ohm-meter sees 45 and then the current splits to the 30 and 30 ohm resistors. So it is 45 + (30 || 30)
thanx for this video it was very good..but you were saying that by finding the equivalent CKT it will be easier to find values than the complex CKT but the thing is you had to do the same process to find the equivalent CKT which is at the end it will be the same,i think its just a different way to find values of the elements within the CKT..but i have to say you explain way better than my teach..thanx alot
thanx for this video it was very good..but you were saying that by finding the equivalent CKT it will be easier to find values than the complex CKT but the thing is you had to do the same process to find the equivalent CKT which is at the end it will be the same,i think its just a different way to find values of the elements within the CKT..but i have to say you explain way better than my teach..thanx alot
SIr! my crappy teacher did not teach this topic and it is included in our mid term. im learning it from your video and indeed sir you are a LIFE SAVER!
OTACON, RESISTORS VOLTAGE CURRENT, METAL GEAR
Blueiii 2 weeks ago
Great job thank you.!!!!
JAYMARINE1982 4 months ago
Exceptional videos
580vbias 6 months ago
OMG! sir you are one hack of a good teacher!!!
nccpds 8 months ago
you must have saved so many degrees with your videos, good on you sir!
TheGeo122 9 months ago
thumbs up for smiley face at 8:13
MellyMel530 9 months ago
This guy is a boss, no lie- Love these vidz, so easy to follow and he's so ez to understand
Xynx 10 months ago
YOUR A KING WITHOUT A DOUBT
sasa123987 11 months ago
question: at 2:20, didn't you find the current of the enclosed loop? not the current of the load resistor? To find the current of the load, you would have to use current division rule right? current-load= (I*2)/(100+2) where I=58.8mA. In that case the load current equals 1.15mA.
nytsegai 1 year ago
Ahaha that arrow looks like a smiley face =)
T7thK 1 year ago
im just a little confuse.....what is the load resistor and how it find out? :-S
amagicy 1 year ago
@amagicy Load resistor is that part of circuit you calculate all this for. Basically, thevenins method is used to calculate current on one specific resistor (the one that connects a and b on shortest way). So typically, you would have calculated entire circuit to get all the results (simplifying to lowest level and then using and then 1st and 2nd Kirfhoffs laws), while this way you need calculate just that one current related to one resistor (or other resistor like part like inductor).
KriegHeil 1 year ago
Ooops! Excuse me!
Eheheh, i did it again...! XD
Btw, thanks 4 this tutorial bro...=)
keepthefaith91 1 year ago
god bless the internet
dinpartyboy 1 year ago 2
why it is 30||30+45? and not 30||45+30?....that's confusing me :|
filipinoguy54 1 year ago
@filipinoguy54
Hi, you have to look from the LOAD side, where we disconnected the RL resistor. The ohm-meter sees 45 and then the current splits to the 30 and 30 ohm resistors. So it is 45 + (30 || 30)
ClaudioArrau 1 year ago
It bothers me that you are teaching thevenin and on the other hand inserting sums like 5+3 into a calculator
Anyhow... thanks
mrvlhs 1 year ago
thanx for this video it was very good..but you were saying that by finding the equivalent CKT it will be easier to find values than the complex CKT but the thing is you had to do the same process to find the equivalent CKT which is at the end it will be the same,i think its just a different way to find values of the elements within the CKT..but i have to say you explain way better than my teach..thanx alot
nimer103 1 year ago
thanx for this video it was very good..but you were saying that by finding the equivalent CKT it will be easier to find values than the complex CKT but the thing is you had to do the same process to find the equivalent CKT which is at the end it will be the same,i think its just a different way to find values of the elements within the CKT..but i have to say you explain way better than my teach..thanx alot
nimer103 1 year ago
Am I weird for liking the sound that comes from him writing?
SingTingz31 1 year ago 52
@SingTingz31 lol....everytime he types i get excited O_O
Shock7061 11 months ago
@SingTingz31 yes.
PurestLogic 11 months ago
@SingTingz31 yes you are.....
khalidwalankar 2 months ago
@SingTingz31
i like it too
fr00tcrunchStarcraft 1 month ago
@SingTingz31 lol, right?!
ucfknights123456 1 week ago
SIr! my crappy teacher did not teach this topic and it is included in our mid term. im learning it from your video and indeed sir you are a LIFE SAVER!
SuperWolverine001 1 year ago
SIR U R LIFE SAVER
THANX A LOT
khankk2 2 years ago 29