i have a grizzly 660 with airbox belt intake and exaughst snorkels with the radiator vents and carb vents yet it stil stalls out under water could you help and give some help and piont me in the right direction?
put dielectric grease in the spark plug boot, and pull the plugs off the front diff and put it in there. On the carb vents they all shouldnt be ran up to the top. On the left side of the carb a vent comes out and T's one goes toward the pod and the other one goes down, the one going up you can run up as high as you want the other one needs to stay going down and you need to put a check valve on it so gas can still flow out and it doesnt flood.
@Hausscatgrizz thanks man due to the last test its not running at the moment i either fouled the spark plug or the starter is no good i turn it on and push the button but it does nothing. i will do the grease next time where can i get a check valve?
check your battery cables and maker sure they arent lose or corroded if so it would cause it not the fire or start. youcan buy the check valve at the dealership it is a one way valve so may sure you blow into it and see which way it goes on, it goes on so stuff can come out of the hose and not in it.
@Hausscatgrizz sorry for all the questions i just want to get it right when i did test it it ideld in the deep water so put went to back out it acted as if it was cold and bogged out do you think the check valve and grease on the spark plug will fix that?
i have a grizzly 660 with airbox belt intake and exaughst snorkels with the radiator vents and carb vents yet it stil stalls out under water could you help and give some help and piont me in the right direction?
heavydsalt 1 year ago
@heavydsalt
put dielectric grease in the spark plug boot, and pull the plugs off the front diff and put it in there. On the carb vents they all shouldnt be ran up to the top. On the left side of the carb a vent comes out and T's one goes toward the pod and the other one goes down, the one going up you can run up as high as you want the other one needs to stay going down and you need to put a check valve on it so gas can still flow out and it doesnt flood.
Hausscatgrizz 1 year ago
Comment removed
heavydsalt 1 year ago
@Hausscatgrizz thanks man due to the last test its not running at the moment i either fouled the spark plug or the starter is no good i turn it on and push the button but it does nothing. i will do the grease next time where can i get a check valve?
heavydsalt 1 year ago
@heavydsalt
check your battery cables and maker sure they arent lose or corroded if so it would cause it not the fire or start. youcan buy the check valve at the dealership it is a one way valve so may sure you blow into it and see which way it goes on, it goes on so stuff can come out of the hose and not in it.
Hausscatgrizz 1 year ago
@Hausscatgrizz sorry for all the questions i just want to get it right when i did test it it ideld in the deep water so put went to back out it acted as if it was cold and bogged out do you think the check valve and grease on the spark plug will fix that?
heavydsalt 1 year ago
Thats a cool vid. With a bit more work I hope I can go that deep.
swampcat07 2 years ago
That pond has been known to eat axles!
mudcatgrizz 2 years ago