Added: 4 years ago
From: natashaevans123
Views: 120,691
Sort by time | Sort by thread (beta)

Link to this comment:

Share to:
see all

All Comments (74)

Sign In or Sign Up now to post a comment!
  • 00:16 enter text here

  • You must be really fascinated with the glowing exhaust

  • you need to be able to control the ignition timing, of course you can't with a glog deal,, unless you play with the compression ratio which you can't change either while running ,,, definetelly that hot of exhaust is wrong,, free up the mufler some to relief the back pressure or got to spark ignition great job though,,,,,

  • @n4120p Glowing exhaust is normal under load / high RPMs...anyone who has run a performance engine on a dyno will just look at you weird if you say that to them.

  • Digital zoom. eew.

  • where did u get your radiator from?

  • @24nitroguy Looks like a radiator from a PC water cooling system.

  • so u need your glow plug on all the time to keep it running

  • Ouch!! - Methanol engine on petrol!!! - up the compression or goto spark ignition - much longer in that configuration and it's looking like being history!!!

  • how many cc?

  • wow is that thing liquid cooled ? it looks like theres a rad off to the side?

  • Really nice build, either the exhaust is too small, or the timing is off. Either one could cause the hot exhaust. 

  • No way! Very nice!

  • Exhaust valve must be screamin' hot...

  • Globe valve cam sir?

    

  • Put it on a bicycle! 3w motoredbikes com

  • I might be wrong, but this thing does not sound healthy to me.

    I also believe that this glow plug ignition is responsible for a much too late ignition, so that fuel is still burning when ex. valve is already open hence the ex. manifold is glowing so fast. - No good at least for the valve.-

    Nice engine though, just try a cdi ignition for the heck of it , i am sure the ex. manifold will glow if ever only at much higher revs. than.

  • timing,, if it has a way to time it.... is way too retarded. Advance the timing a bit... that will prevent the exhaust pipe from getting red hot.

  • ehm, if the exhaust glows, isnt that thing a bit ineffective??

  • a two stroke would be wayyyyy more better. . . .

  • Iv done one of them there 15cc you could add as many pots and to them as you like and very easy to do even the cam

  • Gota tongue test that one!

  • the exhast is glowing, because it looks like he used a natural gas connect line as an exhast manafold!.. try CAST IRON, it wont glow..

  • no, it looks like a flex manifold intended for a saito 4 stroke. anyways, sweet engine... he probably mixed nitro 50/50 with gasoline/oil, i used to do it so i could run a glow plug in my large scale planes and get rid of the ignition system.

  • i dunno, the connect ends looks allot like a natural gass line.

  • enter your text here lol

  • is it a 2 or 4 stroke, gasoline?

  • 4 stroke running with a glow plug...

    im not really sure...

  • Most of the model engines that are 4 stroke use a glow plug... For this guy it simplifies everything.. no ignition system needed... look for 4cycle model RC engines.. on U tube.

  • Well how the heck is her using petrol/gasoline with no ignition system? Methanol, sure but gas?

  • Good point.. I missed that it was running on petrol... perhaps they are using the word petrol to mean fuel in general. It looks like they have a glow plug igniter hoocked up, but I guess that could be a spark plug..

    No Idea for sure.. But it is a really cool engine.

  • its a four stroke thats why it has a timing belt

  • yeah but how is the piston lubricated?

  • UMM well ther is the bottom end of the engine and the piston dip's in the oil and keeps a small film of oil between the piston and the cylender

  • yeah i know its a 4 stroke from the sound and i can hear the valves but like that piston must be pretty small thats why i was asking

  • yeah the piston is problebly the size of a C battery

  • yeah i know my 2 stroke piston on my weed eater is small like the size of half a bottle of vix vapour rub and a little less diameter i love small enginges espesially 2 stroke there so easy to fix the 2 stroke weed eater ones and theres so many uses for them like rc cars and boats and lets not forget weed eating lol

  • @pimpinpenz LOL weed eating? what is that?

  • lol man u know with a weedeater / trimmer lol

  • lol sik

  • HOW????????????

  • touch it! I dare you!

  • i triple dog dare ya!

  • lol....y sell it?

  • touch it! I dare you!

  • i double dare you !

  • runs smooth like a day in idle nice work don't burn it out now! u probably burn it a couple of times already yourself and built it back again but like some people say if i build it i can take it down too!

  • When the exhaust glows red, it means you are running the engine WAY to lean. You will blow it up if you keep running it like that I assure you

  • Man I assure you , you don't know shit . So just shut the fuck up and watch more vids.

  • sorry mate thats wrong

    take alook at some of the f1 engine tests and tell them that thier running thier engine too lean lol

  • AWESOME ENGINE

  • hi i ahve a question i just broke my HPI Rc NITRO CAR engine..:( and i want to get one to replace it. what is it i have to look for if mine is a 1.8cc and 3 cm3...  what is it that i have to look for??

    thanks hope u can help

  • What was the thing you removed, near the end of the video? Thanks for sharing.

  • hi, i took the glow plug connection off to see if it would continue running, but it didnt!

  • wow is that water cooled? and how much does it cost to get one of thos?

  • watch how the exaust metal oxidizes throu out the film

    lol

  • Hot

  • touch it you know you want to... JK sweet

  • quite big for a 15cc,looks and sounds gr8 ,more power than a 30cc two stroke no doubt

  • don't know about that, as funky as 2 strokes are, they make lots of power.

  • my appoligies,on looking at the vid again and paying attention,i now say althings concidered,it's a reasonablely sized,and still sounds and looks gr8.Yeah two strokes make heaps of ponies when(if) you get the air/fuel(inlet)and the pipe (exhaust)correct!

  • TU SI NU MATT

  • I' thinkin supercharger is the next step

  • can you say computer fan?

  • Hello, Where can I buy set of drawings for this engine? reards

  • hey would that pull me on a 30 pound bike ith me on it if i mounted it on the bike? cause if it does then im getting that shit soo fast its nice by the way

  • was the run to lean

  • its a four stroke der the crank shaft is full of oil

  • if you were to build a 2 stroke you can make it with oil in the base you just need to add a supercharger... thats how a 2 stroke diesel works

  • if its like a four stroke nitro enginet he the crankshaft is empy and get it oil from oil blowing past the ring/s and would have a presure outlet somwhere on the cranksaft to releive presuure in the crankshaft (seeing as it a one cylinder) and oil into the fuel take

  • very nice, never seen before a Glow Plug engine ruuning with petrol !

    How is it lubricated ?

  • niceeeee

Loading...
0 / 00Unsaved Playlist Return to active list
    1. Your queue is empty. Add videos to your queue using this button:
      or sign in to load a different list.
    Loading...Loading...Saving...
    • Clear all videos from this list
    • Learn more