@0mgwtfbbq21 I have actually a variety of mags from different makers. First it came with a WA mag that I tried to upgrade the internal O rings with and it failed miserably. Two of my mags are Bomber mags which also required an O ring upgrade and they STILL suck balls don't get them. Three are clone mags that altogether for 3 cost 65$ shipped though only one of them really fires the other two are duds. Two GHK mags (around 80$) one turned dude. And now one prowin mag (80 shipped) that is best!!!
@HammerheadWOC k i guess ill get the prowin mags but where can i buy them cuz ive looked in evike and airsoftgi and they sold out also in redwolfairsoft :P
@0mgwtfbbq21 neither evike nor airsoftgi carry them far as I know. I purchased from redwolf but wgc shop has the short version and thats all I can find so far
never heard that one before...no i use standard match grade bb's either from excell, systema, or madbull. Anything over .3 grams because of the super high fps. GHKs just need the lip of the mag where the bbs are fed shaved a tiny bit to feed properly. That and to have the valve release well lubed cus damn do those things stick!
Drift, I have two 2nd gen GHK mags (at least I think 2nd Gen). 6mm BBs are tight fit and loads about 44 rounds to a mag. I sanded down my magwell and mag bodies but it's still a tight fit. I dropped these mags in the dirt, cleaned them and they still fire the entire mag with good consistency. Hope that helps.
Yeah with low quality bbs just to see if it would still fire. Anything high quality works perfect! And I also sanded down the mags a ways, they were WAY tight fit in the body at first
Nope, so far all the BBs clear the magazine. Had two jams though, this is because I slapped that magazine too far up the mag well (not really a problem just reseat Mag). I'm using .25 gram BBs.
Oh yeah that's what I wanted but there was no way I could afford the initial price! I have to work and make money as I go so that's what this gun is becoming! All you will need is a 509 inner barrel (6.03 or tighter I have the .01)! Oh and a bipod haha! I just need the rail system! I am getting the madbull noveske free float, its drop dead sexy!
uhhh did they now? Pretty sure WA came out about a year prior....? I never said they cloned it btw, they used the WA design and improved all the parts with heavy duty metals.
dude, i know alot more than you trust me! g7p had the original rights for the gbbr its just that they sold the rights to wa and wa's are techincally the prototypes of g&p wocs
thats pretty sweet i had never heard that anywhere before!! Where did you read about it?? And im pretty up on the forums and airsoft chat so no need to get all high and mighty dude...
well yeah the not so known ones arent the head designers. pretty much there job is to give some ideas, fix the flaws before reaching production, and yeah. im gonna ask for their names again
As far as I can tell, G&P and Bomber are sister companies to WA. G&P had original rights to the new shooting system (tried and true old school uses brass tube (i.e. Sun Project and WETech). WA had rights to manufacture rifles with said design. Both technically can product the rifle with the pattern. This is what I gathered from Gasguns Info and other forums. Unfortunately, I can't confirm short of asking G&P/Bomber and WA directly.
haha sure thing! i love this propane adapter its lasted me 2.5 years and has only fallen apart once but its easy to reassemble! I tried the rubbery one but it did not work well atttt all. Just a couple drops of silicon everyonce in awhile and you are good to go!
im wearing this mask because my mom is making me. she doesnt want my face all over the internet for fat grapists
Drumdudeck 1 year ago
@Drumdudeck yes...dorm rooms certainly are great places to advertise that I had an airsoft gun present. You must be sharp as a spoon.
HammerheadWOC 1 year ago
what mags do u have and how much were they?
0mgwtfbbq21 1 year ago
@0mgwtfbbq21 I have actually a variety of mags from different makers. First it came with a WA mag that I tried to upgrade the internal O rings with and it failed miserably. Two of my mags are Bomber mags which also required an O ring upgrade and they STILL suck balls don't get them. Three are clone mags that altogether for 3 cost 65$ shipped though only one of them really fires the other two are duds. Two GHK mags (around 80$) one turned dude. And now one prowin mag (80 shipped) that is best!!!
HammerheadWOC 1 year ago
@HammerheadWOC k i guess ill get the prowin mags but where can i buy them cuz ive looked in evike and airsoftgi and they sold out also in redwolfairsoft :P
0mgwtfbbq21 1 year ago
@0mgwtfbbq21 neither evike nor airsoftgi carry them far as I know. I purchased from redwolf but wgc shop has the short version and thats all I can find so far
HammerheadWOC 1 year ago
@xxthehuskycaboosexx i realize this comment is 4 months old but just to add....both ways are correct. WOC or W Oh see. Just like Asap or A S A P.
driftinsti 1 year ago
what bb's did u put in your ghk? I heard the GHk mags don't take 6mm bb's but instead take 5.8mm?
driftinsti 2 years ago
never heard that one before...no i use standard match grade bb's either from excell, systema, or madbull. Anything over .3 grams because of the super high fps. GHKs just need the lip of the mag where the bbs are fed shaved a tiny bit to feed properly. That and to have the valve release well lubed cus damn do those things stick!
HammerheadWOC 2 years ago
oh and never use madbulls tracer bbs, they get uber chopped up.
HammerheadWOC 2 years ago
Drift, I have two 2nd gen GHK mags (at least I think 2nd Gen). 6mm BBs are tight fit and loads about 44 rounds to a mag. I sanded down my magwell and mag bodies but it's still a tight fit. I dropped these mags in the dirt, cleaned them and they still fire the entire mag with good consistency. Hope that helps.
leviathan556 2 years ago
Cool thanks. Have you had any feeding problems?
driftinsti 2 years ago
Yeah with low quality bbs just to see if it would still fire. Anything high quality works perfect! And I also sanded down the mags a ways, they were WAY tight fit in the body at first
HammerheadWOC 2 years ago
aw....u sanded the mags? Do they look scratched up ? lol
driftinsti 2 years ago
Nope, so far all the BBs clear the magazine. Had two jams though, this is because I slapped that magazine too far up the mag well (not really a problem just reseat Mag). I'm using .25 gram BBs.
leviathan556 2 years ago
I would reccomend anything over .30 and I use .40.
ktmracer3500 2 years ago
wow .4 thats ridiculously heavy haha but i do use .3s
HammerheadWOC 2 years ago
G&P Makes a SPR GBB looking into buying it
Oxstayne 2 years ago
Oh yeah that's what I wanted but there was no way I could afford the initial price! I have to work and make money as I go so that's what this gun is becoming! All you will need is a 509 inner barrel (6.03 or tighter I have the .01)! Oh and a bipod haha! I just need the rail system! I am getting the madbull noveske free float, its drop dead sexy!
HammerheadWOC 2 years ago
G&p did not clone this rifle because G&p sold the rights to WA
TheR3CK 2 years ago
uhhh did they now? Pretty sure WA came out about a year prior....? I never said they cloned it btw, they used the WA design and improved all the parts with heavy duty metals.
HammerheadWOC 2 years ago
dude, i know alot more than you trust me! g7p had the original rights for the gbbr its just that they sold the rights to wa and wa's are techincally the prototypes of g&p wocs
TheR3CK 2 years ago
thats pretty sweet i had never heard that anywhere before!! Where did you read about it?? And im pretty up on the forums and airsoft chat so no need to get all high and mighty dude...
HammerheadWOC 2 years ago
i have really good friends who are close to high ranked emplyees of both company
TheR3CK 2 years ago
uhh...k? I'm not really sure how this all was all that relevant though! haha
do you have one??
HammerheadWOC 2 years ago
its relevant because they are also close friends with some of the designers in WA and G&P ( the not so known ones )
TheR3CK 2 years ago
...? who are they? And thats nice your friends with some of the "not so known ones" which to be honest is starting to sound pretty silly...
HammerheadWOC 2 years ago
well yeah the not so known ones arent the head designers. pretty much there job is to give some ideas, fix the flaws before reaching production, and yeah. im gonna ask for their names again
TheR3CK 2 years ago
LOL dude really? "really good friends close to the designers". You don't even know their names. Thanks for your awesome um...input?
HammerheadWOC 2 years ago
As far as I can tell, G&P and Bomber are sister companies to WA. G&P had original rights to the new shooting system (tried and true old school uses brass tube (i.e. Sun Project and WETech). WA had rights to manufacture rifles with said design. Both technically can product the rifle with the pattern. This is what I gathered from Gasguns Info and other forums. Unfortunately, I can't confirm short of asking G&P/Bomber and WA directly.
leviathan556 2 years ago
how come the ejection port is on the left? didi you do this custom?
hebeya10 2 years ago
haha no no no i turned the gun upside down because I am a left handed man, so Its hard as hell for me to operate it right handed!
HammerheadWOC 2 years ago
but most m4 or m16 have the ejection port on teh right but nice gunand video check out my vids aswell they are airsoft
hebeya10 2 years ago
right...the gun is flipped around! if you turn it right side up and turn it, it is on the right side! The picture is inverted! And i will!
HammerheadWOC 2 years ago
Thanks, for this video! Finally i was able to find the propane adapter, cuz you said the word madbull^^
AdioUKO 2 years ago
haha sure thing! i love this propane adapter its lasted me 2.5 years and has only fallen apart once but its easy to reassemble! I tried the rubbery one but it did not work well atttt all. Just a couple drops of silicon everyonce in awhile and you are good to go!
HammerheadWOC 2 years ago