Orgasmo's Kandi Bikini Tutorial http://siorai.dyndns.org (new site address!)

[MISSFABLEGODDESSES]

can u make the bottem

[brennavampirewolf]

do u sell them ?9.9

[siorai420]

As far as measurements go, i find that people have the most trouble with the initial height of the triangles.

If you have a tape measure, simply measure the distance between where you want the strap to rest under your chest, then up to the desired coverage area.

One inch, is equal to 4 typical run of the mill pony beads. The standard is 9x6mm.

1 inch = 25.4 mm, so 4 pony beads would be 24mm, so its 1.4mm smaller than an inch. But due to the quality of beads, colors, etc, its negligible.

[TheScript55]

buy a bikini that fits. measure it, then measure ur kandi beads too make sure its not to small

[thetreessing]

it'd be greater help if the table was a darker color and not white >.<

[1MusikFreak1]

ugh. im making one. its too small for me :(

[KawaiiTakaraChan]

could you raise the audio on your vid??

[rawrximxferocious]

You have a good announcer/instructor voice xD

[kairidestiny666]

How much string should you use for this

[Lov4bl3Kid]

im making one !!!!!!!!!! i hope it doesnt nip :S

[bite0my0unicorn]

uh...... how long should i make it? im a 32 DDD....... about how many beads do i need?

[bite0my0unicorn]

@bite0my0unicorn well i used about 6 packs of 500 beads. but it looks wonderful. hahaa. took me forever. but this video helped alot. thanks!

[phewphewishotchu]

what if it broke o.O

[siorai420]

@phewphewishotchu you know, it's never happened, not once.

[kandikidtot]

@phewphewishotchu never under etsamate the power of kandi

[Xombiegirlxo]

I'm kinda lost on how you actually start it? :/

[siorai420]

@Xombiegirlxo its done usually with either a multi stitch, or a peyote stitch, I think youtube has a few already for how to make it, or just im me sometime,

Aim/yim orgasmickandy

Msn orgasmickandy@hotmail.com <3

[HardFrequenceKids]

@siorai420 can u use this method for the bandana??

[JxOxTxSxB]

lawlz 420

[IHeartEyeliner1]

just a bit curious how does this top take shape when you put it on ... .... ..... ...... does it stay flat or does it mould around the boob sowi if that was innapropriate to say

[getcrunk63]

make a bottum one :O and top and give it to me ;D

[betty5boop]

That was horable

[BringDaniTheHorizonn]

id advise people to wear a REAL bra under that if you intend on wearing it to raves.

me nd my friend wore em, nd she was dancing alot nd hers fell apart, luckily she was wearing a bra under hers, just like me, so yeah (:

[siorai420]

@BringDaniTheHorizonn I've actually always recommended a spare shirt, just in the off chance that something happens, but, to be honest, out of the dozens I've made, none of them have ever so much as loosened, let alone snapped/fallen apart. .. ...

So, I'm not really too sure what to say about that... heh

[BringDaniTheHorizonn]

@siorai420 Heh well ours were made 3 months before actually wearing them nd dancing so aha ofcourse OURS would fall apart, considering you probably don't dance in a kandi bikini top... sir (:

[siorai420]

@BringDaniTheHorizonn ... well, I've never actually -worn- one of my own kandy tops, why would I? heh. But I know every single one of my customers has definately danced in them, and a few of them have even go swimming in them on a regular basis. I'm curious though, as to know where it broke apart at, and/or were you guys able to find out where the mistake was made?

[BringDaniTheHorizonn]

@siorai420 it was made at the bridge.

but considering my friend and I are -busty-

its easy to understand (:

[siorai420]

@BringDaniTheHorizonn ohz. yeah, I think the biggest I made was DD? I dun member >.> But yeah, it was definately... how shall I say... reinforced? 6 wide? or something, it absolutely required a bit of design work o.o

[BringDaniTheHorizonn]

Aha well than you get the point (:

[icebusy]

no mames we ponle otro mas chido foo whats up with that shit

[siorai420]

@icebusy

....

wut

[snake039]

hello can you tell me wre to buy kandi i need more and can't found it anymore. i am from los angeles california and i need the kandis for the 2010 love fetival that is going to be in los angeles california

[MysteriousXMoonlight]

how do you do the simple multi stitch?

[AshleyAppa]

this video is blurry

[siorai420]

Stretchrite, works great. Haven't found anything better to date.

[LoserIsALookALike]

@siorai420 that rhymed.

[ZombeeX3]

Quick question: What kind of string do you use? I want to make one but I don't want a string that's going to tear easily and then be at a rave and have that happen and be topless in front of everyone (lol). (:

[ChaosKarloo]

@ZombeeX3 You could put tape on your nips if it breaks so you won't be too exposed...xD

[ZombeeX3]

@ChaosKarloo Hahah true true, I actually did make and wore it to EDC and it didn't break! I was so glad haha

[erykafaye]

i want to order one but that url doesn't work :<

[siorai420]

@poptartkid89

Okay hun. You do it on -both- sides. the way I did the tutorial is from the very center, so if you do it on both sides, it will make it triangular.

[siorai420]

The triangle is done by not adding a bead once you get to the top. Feel to pm with some contact info if you want more information okie? I have all the messengers <3

[poptartkid89]

how do you make them triangular?? cause mine is coming out like a right angle :// have no idea how to do this lol you only skip on one side right? but then it like a riht angle does it matter what kinda string you use or somethign???

[poptartkid89]

so im making my own i leaned from diffrent website. and come on youtube to see f it could help at all. I DONT GET THE SKIPPING THE BEAD THING! are you like skipping a row or something cause i just tried figuring it out and it ended up NOT looking like a triangle.. i mean it did but it wasnt how it should be it ended up being like one side long then other two short and they were like gaged edges on mine... please EXPLAIN THE SECOND TIME you have to skip a beed what DOES IT LOOK LIKE!?

[xyukifangirlx]

hes so high c:<

[siorai420]

I honestly wish I had the time to be able to remake this, unfortunately, I don't, but I will soon! The quality has been bugging me for quite some time, same with the sound volume, it was my first tutorial, so, naturally, it sucks. Horribly. But I do appreciate everyone's input! And I'll be recording a new one in the comming weeks. Shouldn't take me more than a month <3

[Ari3LL3macdre]

if you have windows, just re-record it with windows movie maker and boost the volume. this is a good tutorial!

[Sorachandler]

if i could here you talking a little better then mabey i could make a cool top like this but we can't here you

[Ari3LL3macdre]

haha the bigger the tatas, the more rows you gotta make.

i'm a B soo i made 24 rows on mine =)

this is a good tutorial besides the fact i had to re record the audio cos i couldnt hear what he was saying!!

us ravers cant hear anything!! fuckin speakers man.

anyway, thanks alot!

[I8apoptart]

LOL true i have a tummy and i am a B 2 so i dont think i would feel confterbul at a rave with just a bikini but also true the speekers are Awsum in am ear shattering sorta way

PLUR

[dennasaurr]

hahahah yup im a B too, and ya ravers are so hard of hearing XD

[Jothegoddess]

Is it possible to make one of these for a girl with huge boobs?

Like, I've got somewhere between 36 d and 36 d1/2... Can I make one for me??

And if so, how many beads tall in the center should I use for it??

I'm super confused, but I think I might be able to get it right if I work hard enough.

thanks so much for making this!!!!

[siorai420]

Yes, it's all one piece of string, but I usually cut it up into smaller, more manageable peices of string. usually around 3 feet long (1 meter), or so, much easier.

I'll actually be posting up some new stuff with a few weeks here, I just moved recently, so I'm still getting situated out here on the east coast, but rest assured I haven't forgotten, and will be adding more very sooooon

[31FireFrets]

thank you ^^

[31FireFrets]

is that all one piece of string?? how long a piece do you need to complete that?

[31FireFrets]

OMG so hard...

I feel bad asking you this since it takes so long but can you make a tutorial that is a little easier?

I don't even know how to start it D: Can you make one that shows how to start it and the steps to make the triangle, center piece, and halter strap?

I reeeally want one D':

[unca101]

with my pea sized brain i doubt i could ever ...EVER make this :] lol nice job tho , ur funny .

it would suck / be funny if that thing semi broke on the girl that will wear that and her tits would just say hello to the world for a bit . lmao

im weird XD . hopefully that doesnt happen cuz u spent a lot of time on it . :]

PLUR

- Clumzzy

[DanEVonDoom]

volume is reeaalllyy low

but this is phucken sick

nice tutorial

[xXPoserFaceXx]

A suggestion:

If you were to sell these I thin you would make some bankk.

I would def. buy one. Let me know if you decide too.

Orr, since i'm so adorable you could make one for me and I'll pay for it. :DD

[siorai420]

actually you're looking at around 24-26. Try each one, to see how it'll look, and go accordingly

[SmexiPandi]

How many beads tall in the center should I use if her brest size is a 34 a. & a 34 b

[Brutalxbritnee]

Dude, that looks like it'll take forever

I need a printout tutorial soo I can have it step by step :(

[karmasabeach]

ok this is mad hard could you tell me how to start this? i cant even get it started and i REALLY want to make one could you maybe publish a guide to make multi strips? i can make the bracelets but i cant get the strips.

[karmasabeach]

HOLY COW THATS FREAKING AWESOME i would try but ive never made any kandi im kinda a poser *blush* but i will try someday

[killerelisa]

duuuude.

tried so long

finally

went back

watched

AGAIN

after being confused from kanditrade.

FINALLY GOT IT.

you rock.

[spinjoh]

i hope there unisex ^^ lol P.L.U.R

[reihguilley]

dealande i am and will certainly be making one of these at work tomrrow...

[MandyKayy2]

lOl your voice wasnt really lame.. in a way it was adorable :P

and this being your first tutorial and cam quality.. I acctually say you did a pretty well job.. though my candy skills arent the best..maybe once I learn a bit more I will DEFF. try this out =]

thanks!

PLUR

[siorai420]

Aww! Thanks!  I'm going to be doing a bunch more soon...

[sherridea]

O.o Your voice is much different than I expected! haha

Thank you for posting this vid!

~Cheshire