a friend of mine has one of thees guns but it only daz single shot even one full auto it been like it since he brot it coz u cant buy full auto airsoft guns over here is there a way to make it full auto agen
i use this gun well im experianced and ill telll you its all right not bad not good .very upgradeable i look like a noob with it but when peple see its performance its scary. like i said customizable or perhaps a whore gun but aany parts fit
I have the same gun, my problem is that it would only fire full auto in semi mode and auto mode. but the safety works fine would you recommend me buying a mosfet chip to fix it so i can use it in burst mode instead?
Some of you guys are saying your guns aren't working. That's most likely because you were shooting on full auto to Long. All electric airsoft need to be shot in like burst shots or your ruin your gun.
I was wondering if you have to take out the selector switch in order to get to the gearbox.I super glued it to the metal thing that connects it to the other selector switch since it was falling out.
I have the jg mp5 sd6 and now when I pull the trigger their is no resistance like their used to be. and recently the gun has stopped working all together. And when I pull the trigger their is zero resistance and nothing happens.
What do you think is wrong with the gun? Is it the gearbox?
@52Capsfan8 I'm also having the same problem. At first i thought the battery died, but after I charged it and plugged it in the gun still didn't work. :'(
i have a question, my mp5 looks and pretty much is this one, it's just echo1. my motor inside the gun was firing louder than usual so i got a wrench and adjusted the gun at the place under the hand grip where it's supposed to adjust the gears? but still it stayed firing loud, even when i adjusted it. can you help me? do i need a new gearbox? can i fix it? thanks/
i have this gun, and for a while full auto wouldnt work, and now it works after a funny thing happened with the switch, but now when i just tap the trigger on full auto it shoots for a few seconds after i let go of the trigger. i waste a lot of ammo, and it isnt really safe to use if i cant stop shooting when i need to. any suggestions on what i should look into to fix it?
this happend to me firing after i let go. this is a very cheap gun i cound have got 2 of these with the money i have spent in good parts. the trigger assembly probly has burrs and needs to be deburred with an exacto and some sand paper. u sould possible need a new selector switch for when its not selecting the correct fire mode. just a few things i can think of. also this gun would get get stuck in single fire to where i could not fire so i would have to select full then single then it works.
thank you so much for putting this on, i have been needing a take down of a JG\Echo1 MP5. i just had a problem with it not selecting fully auto and when it does, i pull the trigger and it does nothing at all, if you could help please, but if you can't than never mind, thanks for put a video like this on.
Hey man, you might want to check your gear box (the selector switch thingie inside of the gearbox) and inspect it, the internal might be your problem....avtually...its all i could think of, be cause if you can still fire semi, its not the wiring nor the motor.... so its that... just clean it, or replace it with a new one =)
a friend of mine has one of thees guns but it only daz single shot even one full auto it been like it since he brot it coz u cant buy full auto airsoft guns over here is there a way to make it full auto agen
brycemac83 2 months ago
i use this gun well im experianced and ill telll you its all right not bad not good .very upgradeable i look like a noob with it but when peple see its performance its scary. like i said customizable or perhaps a whore gun but aany parts fit
veigerfett 2 months ago
I have the same gun, my problem is that it would only fire full auto in semi mode and auto mode. but the safety works fine would you recommend me buying a mosfet chip to fix it so i can use it in burst mode instead?
TheMUFC91 2 months ago
Some of you guys are saying your guns aren't working. That's most likely because you were shooting on full auto to Long. All electric airsoft need to be shot in like burst shots or your ruin your gun.
horrordudealma 3 months ago
my stock won't come off, any tips? :/
oSAMKIDo 9 months ago
I was wondering if you have to take out the selector switch in order to get to the gearbox.I super glued it to the metal thing that connects it to the other selector switch since it was falling out.
1337xmod 11 months ago
Is that gun worth the money? i would like to get the one with a large stock.
madfighter56 1 year ago
Is there any way to remove the front sight?
trogdor147 1 year ago
how to put RAS unit?
RammaRITOORITO 1 year ago
I have the jg mp5 sd6 and now when I pull the trigger their is no resistance like their used to be. and recently the gun has stopped working all together. And when I pull the trigger their is zero resistance and nothing happens.
What do you think is wrong with the gun? Is it the gearbox?
52Capsfan8 1 year ago
@52Capsfan8 I'm also having the same problem. At first i thought the battery died, but after I charged it and plugged it in the gun still didn't work. :'(
Dragunov305 10 months ago
bgus.. ini yang gw cari...pgn bnerin mp5 SD6 gw ahhh
SatriaOren 1 year ago
No it wil not work for cm .023 thats an lpeg and sucks this is an metal gearbox
jgblaster5 1 year ago
hat does it mean when you shoot it and the pellet shoots but seems like it roled out of the barrel: kinda example of pic
===^= ~~ \ *
the = equals barrel
~ = how far the pellet goes
* = pellet
\ = it goes down
lcavideos 2 years ago
@lcavideos
that usally means your tappet plate is broken or you need a new seal on your piston head
RamboElf 2 years ago
@lcavideos
it could also be your hop up rubber that happend to me. if u have used the gun a lot then i would start with that cheaper and easer.
recall56k 2 years ago
@recall56k my selector switch won't work and when i pull the trigger = no reaction. help
iroiro2 1 year ago
@lcavideos
Yeah like my old paintball gun.
Craptacular!
benny714 2 years ago
do you know how to reassemble the gun
mikegugi2 2 years ago
oh ya, i have done it at least 30 times. this gun was a real trouble child. it finnaly started to work when i installed mosfet chips, go figure.
recall56k 2 years ago
can you make a video of the reassembly? is it the exact same a a tm?
vsr10guy 2 years ago
i have a question, my mp5 looks and pretty much is this one, it's just echo1. my motor inside the gun was firing louder than usual so i got a wrench and adjusted the gun at the place under the hand grip where it's supposed to adjust the gears? but still it stayed firing loud, even when i adjusted it. can you help me? do i need a new gearbox? can i fix it? thanks/
AirsoftMegaTTr14 2 years ago
i have this gun, and for a while full auto wouldnt work, and now it works after a funny thing happened with the switch, but now when i just tap the trigger on full auto it shoots for a few seconds after i let go of the trigger. i waste a lot of ammo, and it isnt really safe to use if i cant stop shooting when i need to. any suggestions on what i should look into to fix it?
deathshadow790 2 years ago
this happend to me firing after i let go. this is a very cheap gun i cound have got 2 of these with the money i have spent in good parts. the trigger assembly probly has burrs and needs to be deburred with an exacto and some sand paper. u sould possible need a new selector switch for when its not selecting the correct fire mode. just a few things i can think of. also this gun would get get stuck in single fire to where i could not fire so i would have to select full then single then it works.
recall56k 2 years ago
OMG you are the most beastly person on the planet!!! THANK YOU SOOOO MUCH FOR PUTTING THIS ON YOUTUBE!!!!!!!!!!!!
ClunkyBannaner 2 years ago
this was the first gun i ever took apart and could not find anything on youtube to help. im glad it helped you.
recall56k 2 years ago
thank you so much for putting this on, i have been needing a take down of a JG\Echo1 MP5. i just had a problem with it not selecting fully auto and when it does, i pull the trigger and it does nothing at all, if you could help please, but if you can't than never mind, thanks for put a video like this on.
Tank24680 2 years ago
Hey man, you might want to check your gear box (the selector switch thingie inside of the gearbox) and inspect it, the internal might be your problem....avtually...its all i could think of, be cause if you can still fire semi, its not the wiring nor the motor.... so its that... just clean it, or replace it with a new one =)
riveralexander34 2 years ago