Hi had a few questions i would like to know if you could answer.ok am jus getting in to classic truck and i dont know much about them i wanted to know if a 1973 c10 to what year look the same?what are orher names for a c10 i look on wiki and i saw scottsdale custom deluxe or are those just trim models? What is a fleetside bed is it better? Thank you for your time
Man. who cares what she looks like on the outside. With that powerful 454 with bout 400hp pulls up next to a little faggot rice car and he wants to race, you blow that fuckers doors off with this sleeper!
they are made by a company called Aero that make like circle/ oval track parts and stuff like that they aren't nothin special they ae 15x8s all around
oh no i didn't sell it i took it out cuz it was winter and it was sittin in the barn and i was just gunna clean the engine and engine compartment on the truck but when i took it out i found out the crank was bad so i decided to wait till i had a lot of money and make that a stroker big block but i just put a 350 in it last week that was a TBI injected motor and i converted it to carburetated and im rebuilding the rearend right now for it to
i'm not sure, i took the motor out and i couldn't find nothin on the headers as far as a tag or numbers or nothin, they are alright ones, on the one header right where the 4 tubes meet and are wleded to the collector, theres one tube that has a dime size hole in it and the other tubes are so close to it to where i can't weld it so they are prolly cheapos
the 650 works ok going down the road but idling has gotten to da point that it fowls da plugs & now i have 2 or 3 misses. im runin on 5 cylinders. poor girl sounds sick. waitn 4 that 150 bucks to com so i can get my frenz 750 edelbrock. i am 3rd owner of my truck. paid $1,200 i got: da truck, headers in bx, new radiatr in bx, eng stand. the eng had a knock. i put in new rod bearings& oil pump now good as new. not diclosing how big the lift is on cam but i have no traxion in 1st. with 3:42 posi
love the ol school flame paint job. is yer engine a 4bolt main? on those trucks the cylinder heads are same as cars. the only difference is if they came off a tall deck truck. they dont make performance parts for the tall deck. everyone i spoke to said they dont. just make sure NO MATTER WHAT, YOU DONT PUT ANY THING SMALLER THAN A 700 CFM CARB ON THERE. my truck has a 650 holley but the guy i got it from put it on there said thas all you need for street but he changed the jets to mak it brn rch
i bought the truck pretty much the way it is in this video, i put the rims on it and some other little things on it but the motor was already in it when i bought it, it is about the roomiest engine compartment that i've ever seen and u can easily sit next to the motor on each side of it with everything there, that 454 isn't to much bigger physically then a small block and they both use the same solid motor mounts and all that good stuff, so no it would be easy for you to do that to yours
wat mods do u have on ur 454, do u know HP numbers. I have a 74 C10 looks like urs. I am in the process of putting in a 454 also. nice looking truck mine is getting prepared for paint. Hope hearing from ya.
oh yea thanx man, well mine is a mildly built motor, i tore the engine out and tore it all apart and what i found is that it had a forged crank, forged stock rods, hyperuteutic piston that were just like stock replacements but not cast, and it has 427 heads but i'm not sure if their a truck head or not they say hi-perf by the rocker but who knows, i firgured it had about 400 hp maybe a little less or more i'm not exactly sure
Hi had a few questions i would like to know if you could answer.ok am jus getting in to classic truck and i dont know much about them i wanted to know if a 1973 c10 to what year look the same?what are orher names for a c10 i look on wiki and i saw scottsdale custom deluxe or are those just trim models? What is a fleetside bed is it better? Thank you for your time
Kintosol89 8 months ago
Man. who cares what she looks like on the outside. With that powerful 454 with bout 400hp pulls up next to a little faggot rice car and he wants to race, you blow that fuckers doors off with this sleeper!
76ChevyC10 1 year ago
@76ChevyC10 i wish i could but i took the motor out and found out the crank was going bad :( was a sad night
evanbetz 11 months ago
what kind of rims are those? i like them, there like nascar style
72charger440se 1 year ago
they are made by a company called Aero that make like circle/ oval track parts and stuff like that they aren't nothin special they ae 15x8s all around
evanbetz 1 year ago
@evanbetzTHAT IS ENOUGH OF THAT!!! lmfao ohh man i cant stop laughing
018e4 4 weeks ago in playlist More videos from evanbetz
You said u took this engine out why? Would u sell it?
randomguyfromtexas 2 years ago
oh no i didn't sell it i took it out cuz it was winter and it was sittin in the barn and i was just gunna clean the engine and engine compartment on the truck but when i took it out i found out the crank was bad so i decided to wait till i had a lot of money and make that a stroker big block but i just put a 350 in it last week that was a TBI injected motor and i converted it to carburetated and im rebuilding the rearend right now for it to
evanbetz 2 years ago
What brand of headers do you have?
TheNebraskan 2 years ago
i'm not sure, i took the motor out and i couldn't find nothin on the headers as far as a tag or numbers or nothin, they are alright ones, on the one header right where the 4 tubes meet and are wleded to the collector, theres one tube that has a dime size hole in it and the other tubes are so close to it to where i can't weld it so they are prolly cheapos
evanbetz 2 years ago
They almost look like dynomax headers.
TheNebraskan 2 years ago
@TheNebraskan never found out what kind they are, still have them though
evanbetz 11 months ago
sweet truck,id like to hear jus the exhaust cause im goin with the same setup on my truck.
Slideways81chevy 2 years ago
watch my other video of this truck doing the burnout, you can hear it idling for a second and then the rest is just burnout haha
evanbetz 2 years ago
the 650 works ok going down the road but idling has gotten to da point that it fowls da plugs & now i have 2 or 3 misses. im runin on 5 cylinders. poor girl sounds sick. waitn 4 that 150 bucks to com so i can get my frenz 750 edelbrock. i am 3rd owner of my truck. paid $1,200 i got: da truck, headers in bx, new radiatr in bx, eng stand. the eng had a knock. i put in new rod bearings& oil pump now good as new. not diclosing how big the lift is on cam but i have no traxion in 1st. with 3:42 posi
MrShinerunner23 2 years ago
love the ol school flame paint job. is yer engine a 4bolt main? on those trucks the cylinder heads are same as cars. the only difference is if they came off a tall deck truck. they dont make performance parts for the tall deck. everyone i spoke to said they dont. just make sure NO MATTER WHAT, YOU DONT PUT ANY THING SMALLER THAN A 700 CFM CARB ON THERE. my truck has a 650 holley but the guy i got it from put it on there said thas all you need for street but he changed the jets to mak it brn rch
MrShinerunner23 2 years ago
did u face any tie ups, set backs, or problems putting the 454 into your '73
c-10?
i wanna do about the same thing
tha707bra 2 years ago
i bought the truck pretty much the way it is in this video, i put the rims on it and some other little things on it but the motor was already in it when i bought it, it is about the roomiest engine compartment that i've ever seen and u can easily sit next to the motor on each side of it with everything there, that 454 isn't to much bigger physically then a small block and they both use the same solid motor mounts and all that good stuff, so no it would be easy for you to do that to yours
evanbetz 2 years ago
thanks for taking the time to respond. i appreciate it.
tha707bra 2 years ago
Damn thats a nice truck
photographermatt 2 years ago
wat mods do u have on ur 454, do u know HP numbers. I have a 74 C10 looks like urs. I am in the process of putting in a 454 also. nice looking truck mine is getting prepared for paint. Hope hearing from ya.
818CHEVYVALLEY 3 years ago
oh yea thanx man, well mine is a mildly built motor, i tore the engine out and tore it all apart and what i found is that it had a forged crank, forged stock rods, hyperuteutic piston that were just like stock replacements but not cast, and it has 427 heads but i'm not sure if their a truck head or not they say hi-perf by the rocker but who knows, i firgured it had about 400 hp maybe a little less or more i'm not exactly sure
evanbetz 2 years ago
I like the 14 bolt rearend and the bigblock, I have a 79 that only has a small block and it's purdy quick so I can't imagine how quick this c10 is!
dylanic355 3 years ago
how much did u buy it for?
blueviper112 3 years ago
what r u running? a black & decker aquarium pump? i'll run u w/ my son's yamaha 50cc-big j
eatbigj 3 years ago