Can anyone tell me what the mixture is hes putting on the tissue to create the permanent form? I also need hints for WWII german camo netting. Thanks guys.
@fltopp1 This is achieved by using craft glue diluted with water. Tacky PVA (white craft glue) works best however, plain Elmer's white glue is sufficient. Be sure to let it dry thoroughly.
I think this guy is very skilled,and he shows you don`t always need an air brush!
But look at the tracks they do not look right how they hang over the return rollers,
the other thing i don`t like about a lot of these tutorials is trying to paint models
when there fully assembled,they just seem to spray brown paint all over the place to hide that fact they can`t get a brush in to all the corners. These guys are pro`s so they should know better!
@rayrex64 The brown serves two purposes. First, it's like a primer coat so that you can use less olive drab. If you were to spray O.D over the light gray, you'd need more paint because you'd see the gray peeking through in spots. Second, the brown also gives the model an undertone or shadowy effect for the final color. If you spray brown all over the model and then spray your O.D, you get a darker, deeper final color.
@burbdood Ive read your comments very carefully and looked at the clip of him Painting the Model again a few times. He is not spraying the Brown first he`s putting O.D on first then the Brown. The other thing is he`s then using NATO Green that`s the wrong Colour it should be deep Bronze Green,maybe he`s not got a can of it?
This guy looks a little like Jackie Chan, I am not being racist or anything. I really do see a slight resemblance. Please don't take my comment negatively.
HAAAAAAA QUE TRAMPOSO ES ESTE WEY, usa las pinturas de su tienda y despues las regresa para venderlas como nuevas jajaja. con razon luego algunas latas me duran menos que otras
This comment has received too many negative votesshow
airbrushes are the best!, ive got 2 and to tell you , once you use them and learn the proper techniques spray cans can still be used, but in your airbrush.
while he uses the new DML kit, which was released circa 2004. i have the Tasca Firefly which retails for about 80$ Canadian. Its way better than dmls, plus i got the Armour Brigade models detail sets for it. I AM not saying the dml kit is bad. its just the same old DML predecessor with some new additions.
Well sorry I don't speak Japanese backfired at you dumbshit. FYI: I mostly use Tamiya Spray Paint. You're making a big deal about me not knowing if it was primer but even though I asked the correct answer. You seem to judge the tank before it was even finished. And wow simply saying I am his mother was a very wonderful comeback. Grow up. Your just acting like an even more of an idiot.
This comment has received too many negative votesshow
Wow I'm guessing you made a second account? What are you a fucking creep? You go to my fucking myspace? Wtf does my myspace have to do with you complaining about the tracks are off. Are you like a 7 year old? You know 7 year olds always talk yo moma jokes. Its okay I understand. Just to clear it up for you I knew it was grey primer I actually have the same exact can. Its just that I wanted to make sure I was correct.
This comment has received too many negative votesshow
I'm tired of this. Tired of the name calling. Tired of arguing the same crap over and over. You win. I'm sure he meant to have the tracks jacked up like that while he was building. He can do no wrong.
The finished product turned out great - I can agree with you there.
I find it funny that, this guy seems to be the owner/worker of a hobby store and he's building the kit in the store. Yet he can't find a spray booth or someplace better to paint it, other then the roof or floor. But, I must admit, he has some skills.
Like a good salesman, he shows that people can put together a nice model, even without an expensive dedicated workshop. Which he has at home, I'm sure.
Can anyone tell me what the mixture is hes putting on the tissue to create the permanent form? I also need hints for WWII german camo netting. Thanks guys.
fltopp1 3 months ago
@fltopp1 This is achieved by using craft glue diluted with water. Tacky PVA (white craft glue) works best however, plain Elmer's white glue is sufficient. Be sure to let it dry thoroughly.
artONI23 3 months ago
@fltopp1 You can use sheets of gauze such as that for bandaging, just separate the layers. Add foliage using whatever works in scale.
lunhil12 2 weeks ago
I love how this guy has the whole hobby shop at his disposal. . .
"Ah man, I need a can of spray!!!" *runs to paint stand* I envy him. With me I gotta hop in the car and go for a 40 min. drive. . .:-/
BlueFox284 1 year ago 2
This has been flagged as spam show
i like modellbuilding and i builded on of this in same as this from academy .model costed 669in czkč
99terysek 1 year ago
This has been flagged as spam show
i like modellbuilding and i builded on of this in same as this from academy .model costed 669in czkč
99terysek 1 year ago
i like modellbuilding and i builded on of this in same as this too sharman like this
99terysek 1 year ago
I think this guy is very skilled,and he shows you don`t always need an air brush!
But look at the tracks they do not look right how they hang over the return rollers,
the other thing i don`t like about a lot of these tutorials is trying to paint models
when there fully assembled,they just seem to spray brown paint all over the place to hide that fact they can`t get a brush in to all the corners. These guys are pro`s so they should know better!
rayrex64 1 year ago
@rayrex64 The brown serves two purposes. First, it's like a primer coat so that you can use less olive drab. If you were to spray O.D over the light gray, you'd need more paint because you'd see the gray peeking through in spots. Second, the brown also gives the model an undertone or shadowy effect for the final color. If you spray brown all over the model and then spray your O.D, you get a darker, deeper final color.
burbdood 1 year ago
@burbdood Ive read your comments very carefully and looked at the clip of him Painting the Model again a few times. He is not spraying the Brown first he`s putting O.D on first then the Brown. The other thing is he`s then using NATO Green that`s the wrong Colour it should be deep Bronze Green,maybe he`s not got a can of it?
rayrex64 1 year ago
@ 7:43 Translation: This is what happens when you get stupid and paint the model after assembly; you get stuck between a rock and a hard place.
GoodwoodAlpha 1 year ago
@GoodwoodAlpha What the hell are you talking about?
MrCrazyAsshole 1 year ago
@GoodwoodAlpha From all the modelling mags Ive seen and read, the models are always completed before painting. Am I wrong on this?
fltopp1 4 months ago
PARABENS......
chimbica91 1 year ago
Tamiya square jars are enamel? And round is acrylic?
JAGDPANTHER20 2 years ago
Holycrap this dude has his own stash of paints. Lucky :(
Deathofblades 2 years ago 3
@Deathofblades I think he owns that hobby shop.
GoodwoodAlpha 1 year ago
This has been flagged as spam show
all the user below this comment fail at life.
\/
Agogaraxis 2 years ago
This guy looks a little like Jackie Chan, I am not being racist or anything. I really do see a slight resemblance. Please don't take my comment negatively.
bttfspencer 2 years ago 7
you are a racist faggit
jellybutt100 2 years ago
This has been flagged as spam show
You are a very nasty person, I hate you and will block you post haste!
bttfspencer 2 years ago
lrn2spell
shoopwhoopX 2 years ago
This has been flagged as spam show
lrn2fuckyrslf you dirty cunt rag whore
jellybutt100 2 years ago
This comment has received too many negative votes show
sure thing nigger
shoopwhoopX 2 years ago
How can I get my hands that SIRIUS rotating display table
swikil 2 years ago
HAAAAAAA QUE TRAMPOSO ES ESTE WEY, usa las pinturas de su tienda y despues las regresa para venderlas como nuevas jajaja. con razon luego algunas latas me duran menos que otras
DFEKC 2 years ago
This comment has received too many negative votes show
i'm glad I have an airbrush and dont need to rely of spray cans I'll tell you that much.
Tatsumi67 3 years ago
This comment has received too many negative votes show
airbrushes are the best!, ive got 2 and to tell you , once you use them and learn the proper techniques spray cans can still be used, but in your airbrush.
Silnius 2 years ago
This comment has received too many negative votes show
yeah I know how to decant spray cans, it's useful
Tatsumi67 2 years ago
this guys hobby shop is amazing... id bring a tent and sleep in there due to the fact theres so muh to see... lol
Silnius 3 years ago
DML is now over Tamiya is basically all areas of the Scale Modelling market. They have a new Panzer IVH Late on the way.
Silnius 3 years ago
while he uses the new DML kit, which was released circa 2004. i have the Tasca Firefly which retails for about 80$ Canadian. Its way better than dmls, plus i got the Armour Brigade models detail sets for it. I AM not saying the dml kit is bad. its just the same old DML predecessor with some new additions.
Silnius 3 years ago
This comment has received too many negative votes show
anyone know what kind of turn table he's using??
swikil 3 years ago
probibly Tamiya or Mr.Hobby.
Silnius 3 years ago
SIRIUS
swikil 2 years ago
Mr Sufacer. It comes in small jars too 1,000 1,200 & 1,500, I use it and it's great shit. Dries fast and hard.
Tempestwulf 3 years ago 3
I just realized he is LEFT handed!
JAGDPANTHER20 3 years ago 37
So am I! :-)
BigAndTall666 2 years ago
@JAGDPANTHER20 what does that mean? I'm left handed as well and I model
ModellMeister 5 months ago
Your momma lined that shit up REAL nice like.
Craigfucker88 3 years ago 46
At 2:46 is that grey primer hes spraying on?
Deathofblades 3 years ago
This comment has received too many negative votes show
6:24 - our modeling guru has track fitting issues. The tracks are WAY out of whack over the middle bogie. But that tarp idea is killer.
mattd8589 3 years ago
IT COMES OUT FINE IN THE END!!!
Craigfucker88 3 years ago 8
You just seem to judge stuff before it becomes the finished product. Get your facts right dumbshit.
Deathofblades 3 years ago 8
This comment has received too many negative votes show
Wow. I'm sorry. I had no idea his mother was watching. Please apologize to your son for me.
By the way, that IS primer he's spraying. Any dumb shit would know that.
mattd8589 3 years ago
Well sorry I don't speak Japanese backfired at you dumbshit. FYI: I mostly use Tamiya Spray Paint. You're making a big deal about me not knowing if it was primer but even though I asked the correct answer. You seem to judge the tank before it was even finished. And wow simply saying I am his mother was a very wonderful comeback. Grow up. Your just acting like an even more of an idiot.
Deathofblades 3 years ago 13
This comment has received too many negative votes show
Mrs. Blades
I read you're post, and yikes, you're falling apart. I realize you don't speak Japanese, but apparently English isn't real good for you, either.
If you knew it was Primer, you wouldn't have asked in the first place.
By the way, why do you say you're 44 here, but only 18 on your MySpace page? Uh-oh.
dozer8589 3 years ago
This comment has received too many negative votes show
Wow I'm guessing you made a second account? What are you a fucking creep? You go to my fucking myspace? Wtf does my myspace have to do with you complaining about the tracks are off. Are you like a 7 year old? You know 7 year olds always talk yo moma jokes. Its okay I understand. Just to clear it up for you I knew it was grey primer I actually have the same exact can. Its just that I wanted to make sure I was correct.
Deathofblades 3 years ago
This comment has received too many negative votes show
I'm tired of this. Tired of the name calling. Tired of arguing the same crap over and over. You win. I'm sure he meant to have the tracks jacked up like that while he was building. He can do no wrong.
The finished product turned out great - I can agree with you there.
Enjoy your primer. Enjoy your spray paint.
dozer8589 3 years ago
These are great!
If only there were such shows here in the US!
amherbert1963 3 years ago 2
I LOVE PAINT FUMES TOO!!!!
BOROCKHARDJR 4 years ago 2
the best so far!
noel2x 4 years ago
I find it funny that, this guy seems to be the owner/worker of a hobby store and he's building the kit in the store. Yet he can't find a spray booth or someplace better to paint it, other then the roof or floor. But, I must admit, he has some skills.
265LY 4 years ago 2
well at least its better than the guy who sprays inside with no fans or windows open!
bigdubdubs 4 years ago 3
Like a good salesman, he shows that people can put together a nice model, even without an expensive dedicated workshop. Which he has at home, I'm sure.
raakakake 3 years ago 3