Magnetic Shielding Demonstration #2 Autono-Drive Magnet Motor Research

[merlinspower]

Has anyone Built a model of the HOJO or Howard Johnsons permanent magnet motor. Any one tried.. ever ?

[MagnetOnlyMotors]

@merlinspower I don't know if any one has or not. I know that I wont be wasting my time on them. I have my own projects to do & roads to go along. Chow.

Donovan.

[maxdecock]

That's not magnetic shielding. It is nothing more that the magnets being more attracted to the iron than they are repelled by each other. That is why the "magnetic shield" goes in easier that it comes out. Magnetic shielding actually blocks/redirects the magnetic field.

[MagnetOnlyMotors]

@maxdecock That's exactly correct. It's just common vernacular for the description. It is still a useful phenomenon.

Donovan.

[docatomics]

...it would take more energy to move your magnetic deflector in place than could be recouped from the pendilum pulling even without frictional losses as the field is not really shielded but deflected .

[MagnetOnlyMotors]

@docatomics, The magnetic shield goes in much easier than it comes out. I didn't have any visions of using a pendulum to drive anything either, frictional losses not withstanding. This was just another demonstration way to show magnetic shielding.

Donovan.

[SirKThomp]

I’ve been trying to build a ¼ scale Perendev magnetic motor using 1/8-inch neodymium magnets. I know with out the shelding the magnets seek the opposite pole and just center them self’s between poles. Would a C1018 soft iron cup of 3/16th inch with a 1/8-inch hole sheld it enough to keep the magnets from seeking there opposite poles? Or is it impossible to sheld a neodymium magnet from it opposite pole?

Thank you.

[MagnetOnlyMotors]

@SirKThomp Hey Kenn, check your personal messages.

Donovan

[transfusablepng]

Free Energy is real and its here! The Oil companies are doing everything in their power to stop these information. If you want a Free energy machine do a search in youtube for the LT MAGNET MOTOR , Join the revolution!

[transfusablepng]

Free Energy is real but the coverup is strong, if you are interested in a REAL free energy machine then just search for the LT MAGNET MOTOR in the youtube video search , it is probably the ONLY working magnet motor out there. Join the free energy revolution!!

[utopiasspeb]

Free Energy is real but the coverup is strong, if you are interested in a REAL free energy machine then just search for the LT MAGNET MOTOR in the youtube video search , it is probably the ONLY working magnet motor out there. Join the free energy revolution!!

[IndianaBoys]

Good video!. You may like this one:

youtube.com/watch?v=yTMquhXlYP­U

[MagnetOnlyMotors]

@IndianaBoys, That is really weird. To bad the lighting isn't better. It almost looks like something is dripping from above the red parobloic dish into it. Isn't it odd that it originates from one place?... or am I halucinating?

[1freedomfighter11]

very cool

[MagnetOnlyMotors]

@1freedomfighter11, Thanks Bud!

Donovan.

[Anothercoilgun]

Nice work!

[MagnetOnlyMotors]

@Anothercoilgun, Thankyou for the nice comment.

Donovan.

[masterj9000]

make 360 of the soft rubber attractor O and ocilate that CRANK ARM!!!!!!!!

[MagnetOnlyMotors]

@masterj9000 What do you mean by "soft rubber attractor O"? Donovan.

[rayroy3]

good job dont listen to the jerks, theres too many of them. do you know of the work of howard johnson in magnetic field arrangements and creating shaded magnetic poles and magnetic gates that fire? he has patents you can find and also look at his interview in the series "energy from the vacuum" :)

[MagnetOnlyMotors]

rayroy3, Thanks Bud for the compliment. I have heard & read some of Howard Johnson's work. It is very interesting info. Donovan.

[deathsthirdhand]

How did you figure out the right material for the magnetic shielding process?

[MagnetOnlyMotors]

deathsthirdhand, I actually found it on a few old patent applications. They were doing similar tests & I found that soft iron is good for this. Great question. Donovan.

[MagnetOnlyMotors]

MrTitan1976, I'm not quite sure what you are trying to tell or ask me. ? Donovan.

[tehtud2008]

cut your fingernails.

nice work thou.

[MagnetOnlyMotors]

tehtud2008, nice comment ???

 Donovan.

[therealtruthtold]

If sheilding works how come none in 269 years have made a motor yet?

[MagnetOnlyMotors]

therealtruthtold, I didn't know shielding has been going on for 269 years, but I guess the right combination of design hasn't come by yet. Remember the first gas engine was not a 427 c.i. hemi either.  Thanks, Donovan.

[CFrostyTheSnowman]

How do you know none have made a motor yet? You really believe they'd just let you make this type of world changing shit public? Please....

[MagnetOnlyMotors]

CFrostyTheSnowman, What are you so hostile about??????

[BRAIDERMAN]

Yes - you could hook a battery to run an electric solenoid to operate the shield - that is obvious. But then you don't have a 'magnet only motor'. Then your back with the thousands of others on YouTube, believing in 'free energy' from a magnet, and spending & wasting their lives chasing the end of a rainbow.

[MagnetOnlyMotors]

BRAIDERMAN, why are you wasting your time looking at this waste of time stuff?? You could be out looking for rainbow ends instead.  Donovan.

[BRAIDERMAN]

Mainly because it keeps my insanity in check.

[MagnetOnlyMotors]

BRAIDERMAN, OK ... but how does it keep your insanity in check? Donovan.

[CFrostyTheSnowman]

What about a track which brings the magnet into focus? You don't need an external power source for that. Sort of like a wobble bringing the shield in and out of focus as it turns. Why do you care so fucking much if it doesn't exist anyways?

[MagnetOnlyMotors]

CFrostyTheSnowman, Why don't you try & build it, instead of getting so wound up at me.

[wangchi623]

@MagnetOnlyMotors Getting so "wound up" haha Its a pun simply because of a wire coil...

Anyways, Nice video. Easy concept, shame that some people can't figure it out.

[MagnetOnlyMotors]

@wangchi623  Ya, I tried to make it easy, but...... what else is a laddie to do? Thansk for the compliment. Donovan.

[BRAIDERMAN]

Notice that it requires an energy input to move the shielding. This is because the shielding works by displacing the magnetic field & absorbing much of the field from the air gap into itself.. To alter the mag field therefore requires an energy input. To move the shielding sleeve requires a force to overcome both magnetic induction & friction.

[MagnetOnlyMotors]

BRAIDERMAN, that is very true, but there are ways around this problem.Look beyond the obvious, the way few people do. Thanks, Donovan.

[kdkinen]

so the shield is just iron??

[MagnetOnlyMotors]

kdkinen, Yes, But remember not to let it be in contact with the magnet. Donovan.

[MagnetOnlyMotors]

fairlanejay, As to the cogging effect, I am currently working on that aspect of this problem. Thanks Donovan.

[fairlanejay]

If you cant get rid of the resistance of moving sleave at that last moment you haven't achieved anything... energy in is always greater than or equal to energy out. Until you can somehow reduce that resistance or cogging effect, its not free energy. But it may be yet to be discovered

[MagnetOnlyMotors]

XYOUNGWOLFX, Yes, there is a small amount of resistance to the final  point of extraction, but total extraction is not always required. Astute observation on your part. Thanks. Donovan.

[MagnetOnlyMotors]

SteveMontuno, Thank you for the comment.I have only one pole of each magnet facing each other at a time. Hope

this answers your question.

Donovan.

[XYOUNGWOLFX]

at the point where you retract the shield does the sleeve experience any extra resistance other than its usual friction?

[SteveMontuno]

how do you shield one pole, with the other pole still able to work???or is this not possible,,great work

[MagnetOnlyMotors]

To RHEAD100, Muchly appreciated, thanks.

Donovan

[RHEAD100]

Another great video. THANKS

5 stars

[MagnetOnlyMotors]

I believe iron shielding has great potential,& thanks for the comment.

[overunitydotcom]

Very good !

I always said, that you can only get a magnet towork with the right amount of iron shielding cores in it.

Keep on the great work and present it

at overunityDOTcom

Many thanks.

Regards, Stefan.