PLEASE!!! someone help!! I broke one of the blad grips and I have no clue how to take them off to replace them!! I know there is a little screw in the middle but I tried everything and it doesn't work. So can someone please help me!?!?! Thanks!
i had a cpv3 trust me get a blade 400 the electronics suck in the cpv3 once they go bad after 1 month you will pay 80.00 for a new 3-in 1 not worth it
Hey man, I just got an Axe CPv3 today. Charged up the pack and managed to hover tail in without incident. You are further along than me for sure. I fly Realflight g4.5 and just moved away from a E-Sky Lama V4 Co-Axial. I am just a little scared of this real single rotor heli.
Nice job on the video and you found someone that can actually hold a camera steady. Expect a video response next week sir! :)
I don't know how long you've been flying, but you're doing quite well. I' build T-rex & HDX 450's from scratch and they will hover hands off for a few seconds. I have my friends test fly them, as I'm afraid I'll crash them (expensive!). Looks like you're ready for a T-rex or an E-flite 400. They're actually easier to fly from what I've seen. I'm a lot older than you, so maybe my reflexes are too slow.
The earlier version didn't have the bell-hiller setup, so mine is more stable than the V1. However, just a simple hover like this does require constant inputs. I wouldn't call it "fighting," but if i looked away for a second or took my hands off the controls, it would crash pretty quickly.
Is it just that stable, or are you having to fight it the whole time? I have the earlier version, and it just won't hover that well. (it IS set up correctly)
@kentomatic Hi, Im from MX City and I have almost one year with my cpV3 and the electronics fried up now because I program My Futaba 7hcp Radio instead of using the Stock Radio, Maybe is a conincidence but the question is, did you have a wiring diagram of how to connect and configure the C-25, because I already have the C-12 and the GY-240 and also make all the upgrade to the Rotor in anodized aluminum, so I dont want to throw to trash this heli. THX
That was my first heli purchased,couldnt get it to hover right,sent it back,they said the 3in1 was no good so they sent me a new one,this 1 aint a great heli,I regret the purchase now,saving for abetter one.......
PLEASE!!! someone help!! I broke one of the blad grips and I have no clue how to take them off to replace them!! I know there is a little screw in the middle but I tried everything and it doesn't work. So can someone please help me!?!?! Thanks!
snickerbar12 1 year ago
how hard are these to fly vs. a micro coax ?
sonick808 1 year ago
what is the hold gyro?
SolidWater0 2 years ago
my reciever fried after slamming into a mailbox at full speed (forgot it was there)...ill probably just build an exi 450
fspacerc1 2 years ago
i had a cpv3 trust me get a blade 400 the electronics suck in the cpv3 once they go bad after 1 month you will pay 80.00 for a new 3-in 1 not worth it
macdaddy1600 2 years ago
Hey man, I just got an Axe CPv3 today. Charged up the pack and managed to hover tail in without incident. You are further along than me for sure. I fly Realflight g4.5 and just moved away from a E-Sky Lama V4 Co-Axial. I am just a little scared of this real single rotor heli.
Nice job on the video and you found someone that can actually hold a camera steady. Expect a video response next week sir! :)
HeliDragon510 2 years ago
nice job did you have much trouble setting up a gyro or is it easy enough for someone who is very inexperienced to do?
aquapwnsyou 2 years ago
Comment removed
aquapwnsyou 2 years ago
I don't know how long you've been flying, but you're doing quite well. I' build T-rex & HDX 450's from scratch and they will hover hands off for a few seconds. I have my friends test fly them, as I'm afraid I'll crash them (expensive!). Looks like you're ready for a T-rex or an E-flite 400. They're actually easier to fly from what I've seen. I'm a lot older than you, so maybe my reflexes are too slow.
garyshoaf 3 years ago
The earlier version didn't have the bell-hiller setup, so mine is more stable than the V1. However, just a simple hover like this does require constant inputs. I wouldn't call it "fighting," but if i looked away for a second or took my hands off the controls, it would crash pretty quickly.
kentomatic 3 years ago
Is it just that stable, or are you having to fight it the whole time? I have the earlier version, and it just won't hover that well. (it IS set up correctly)
garyshoaf 3 years ago
my 3-1 only lasted about a month before it fried. they did send me a new one though.
kentomatic 3 years ago
@kentomatic Hi, Im from MX City and I have almost one year with my cpV3 and the electronics fried up now because I program My Futaba 7hcp Radio instead of using the Stock Radio, Maybe is a conincidence but the question is, did you have a wiring diagram of how to connect and configure the C-25, because I already have the C-12 and the GY-240 and also make all the upgrade to the Rotor in anodized aluminum, so I dont want to throw to trash this heli. THX
MrCisneroj 1 year ago
How long did your 3in1 last?
sickler4201 3 years ago
That was my first heli purchased,couldnt get it to hover right,sent it back,they said the 3in1 was no good so they sent me a new one,this 1 aint a great heli,I regret the purchase now,saving for abetter one.......
NiteLiter 3 years ago