If you are looking for some gauges.. Look up Instrument Sales & Service they also have pillar mounts and diesel performance. Nov. 2011 they are relaunching an eCommerce site Partdeal.com
my brother in law has a 99 f350 7.3l power stroke with a superchip which gives it an additional 100hp... not kidding, that thing is a tank and i LOVE it to death
Would you please make a video on how you installed your gauges? I have a 1997 f250 and all I can find is how to install them on Super Dutys from 99'-03'. Thanks!
i was wonderin what chip to buy for mine....whats a good one with alot of hp to help me pull some bigger shit and take it throug the mud a little better. and how much would the run??
Haha AWESOME dude! NICE setup...you really wanna try sumthin though...take off those 36's and put on some 32's or 33's...you wil fukin COOK! haha that is if your tires can get traction...but gearing and tire size has like EVERYTHING to do with speed!
Your idi may because don't know anything about them, all the psd has is a flapper, ebpv, on the exhaust side of the turbo which helps increase warm up time in the winter.
he's got a tune, and an intake. the 1.0 housing will speed up spooling but will not increase overall boost in most cases. an intake, exhaust and chip will get you to 18-19 if your truck was made for the 49 states, or 27-30 if it's a california truck.
All powerstrokes have wastegates. If they did not your exhaust temp would rise with stock exhaust and damage the engine. I dont feel like explaining the the wastegate by-pass system right now so go look it up. Wastegate NOT a BOV or recirculation valve.
if its true they were non waste gated, where did the air go? did they just "turbo cough" and it ate it backwards? that surely cant be good for the turbo
96 isent stock if its wastegated. My 96 has the stock turbo and is is not equiped with one. I dont think the turbo makes enough boost to even hurt it when you let off the throttle.
94-97 are definitely not wastegated. we got 3 stock OBS powerstroke turbos sittin on the shelf at the shop if you wanna see. there is also a 2000 psd turbo with the stock wastegate. sorry terpreg, but your wrong.. LoL
If so, then your boost gauge line is probably hooked up to the "red line". IF its connected to the red line the computer can still dump pressure from the line, because it thinks its controlling the wastegate.The computer can open and close the controll valve many times a second. causing the jumping in your gauge... Or its overspooling.lol
@TheCrwilliams it really depends on ur set-up, when i got a tc 6-pos chip and when i set it at 120+hp i got 27lbs of boost b4 i put the new turbo on. now i get 42 :)
my 96 powerstroke is pushing 25 psi. you should go check out my vid
Diesel21J 1 day ago
yes all the 94.5-97 power jokes dont have waste gates
TheCanvas6 1 week ago
This has been flagged as spam show
If you are looking for some gauges.. Look up Instrument Sales & Service they also have pillar mounts and diesel performance. Nov. 2011 they are relaunching an eCommerce site Partdeal.com
InstrumentSales 4 months ago
my brother in law has a 99 f350 7.3l power stroke with a superchip which gives it an additional 100hp... not kidding, that thing is a tank and i LOVE it to death
parshnipe69 5 months ago
Would you please make a video on how you installed your gauges? I have a 1997 f250 and all I can find is how to install them on Super Dutys from 99'-03'. Thanks!
AbernathyJackass 10 months ago
pre 99 powerstrokes are non intercooled and are nonwastegated.
THELOINCOLLECTOR603 1 year ago
@THELOINCOLLECTOR603 it will have a standard plum back waste gate hooked up to the actuator, boost regulator
DanDanNissanMan 8 months ago
LowDexPro... What do you have done to your engine to make that kinda power? You should be running at least 1400 ftlbs, whats the deal with that?
DrMcelroy 1 year ago
i was wonderin what chip to buy for mine....whats a good one with alot of hp to help me pull some bigger shit and take it throug the mud a little better. and how much would the run??
crzyFa5t 1 year ago
@crzyFa5t i want to know also please message me
n10cdp41nt 1 year ago
Are you running stock non-gated turbo?
Hotrodx199 1 year ago
i got them same gauges
chouse2007 1 year ago
Haha AWESOME dude! NICE setup...you really wanna try sumthin though...take off those 36's and put on some 32's or 33's...you wil fukin COOK! haha that is if your tires can get traction...but gearing and tire size has like EVERYTHING to do with speed!
bigdog5986 2 years ago
Gotta love the sound of those tires in the backround
umesswitme 2 years ago
can i please have 48 seconds of my life back
smelly0ldguy 2 years ago
Why dont you get off youtube and go back to jacking off.
Nobody cares that this doesnt interest you.
bikeitup14 2 years ago 2
Your idi may because don't know anything about them, all the psd has is a flapper, ebpv, on the exhaust side of the turbo which helps increase warm up time in the winter.
crzycrazycarl 2 years ago
love the way the turbo sounds, gr8 vid bud
jamesakaduke 2 years ago
how ya get 25 psi? i can only get 15 outta my 96 an its got the 1.0 turbine housing among other goodies.
bobvillaoftn 3 years ago
the 1.0 housing is for quicker spooling not higher boost. it is smaller than the stock housing
crzycrazycarl 2 years ago
he's got a tune, and an intake. the 1.0 housing will speed up spooling but will not increase overall boost in most cases. an intake, exhaust and chip will get you to 18-19 if your truck was made for the 49 states, or 27-30 if it's a california truck.
secondarychaos 2 years ago
All powerstrokes have wastegates. If they did not your exhaust temp would rise with stock exhaust and damage the engine. I dont feel like explaining the the wastegate by-pass system right now so go look it up. Wastegate NOT a BOV or recirculation valve.
terpreg 3 years ago
LMAO
Why don't you go look it up? 94-97 were non-wastegated.
Early 99-2003 7.3L had the internal wastegate.
6.0L is a Variable Geometry Turbo, no gates external or internal on there either.
6.4L, nope.
Dreg555 3 years ago
if its true they were non waste gated, where did the air go? did they just "turbo cough" and it ate it backwards? that surely cant be good for the turbo
tyzorg 3 years ago
Funny i have a 2002 and a 96. Both are wastegated.You lose.
terpreg 3 years ago
96 isent stock if its wastegated. My 96 has the stock turbo and is is not equiped with one. I dont think the turbo makes enough boost to even hurt it when you let off the throttle.
Sprchrged04 3 years ago 2
thats probably not the wastegate your seeing, its the exhaust backpressure valve
ant2190 3 years ago 2
94-97 are definitely not wastegated. we got 3 stock OBS powerstroke turbos sittin on the shelf at the shop if you wanna see. there is also a 2000 psd turbo with the stock wastegate. sorry terpreg, but your wrong.. LoL
tatsch95psd 3 years ago 2
why don't you take a picture of the 96's wastegate so me, and the others who know obs's can tell you how wrong you are.
crzycrazycarl 2 years ago 2
NO! 94 through 97 do not have wastegates!
crzycrazycarl 2 years ago 2
my 94 turbo IDI has a wastegate. its a garrett turbo, same one as on the 95 psd, and it is wastegated
omenica 2 years ago
us original powerstrokes dont have wastegates
Txpsd9673 3 years ago
have you disconnected your wastegate?
If so, then your boost gauge line is probably hooked up to the "red line". IF its connected to the red line the computer can still dump pressure from the line, because it thinks its controlling the wastegate.The computer can open and close the controll valve many times a second. causing the jumping in your gauge... Or its overspooling.lol
terpreg 3 years ago
Not overspooling, I have a kink/crack in the tube that connects to the MAP sensor for the Boost gauge and it causes the needle to jump around.
F350turboDIEZEL 3 years ago
Do you have a stock turbo. I have a bully dog 6 position chip in mind and when I put it on 50 more horses, my turbo max at 20psi.
TheCrwilliams 2 years ago
@TheCrwilliams it really depends on ur set-up, when i got a tc 6-pos chip and when i set it at 120+hp i got 27lbs of boost b4 i put the new turbo on. now i get 42 :)
LowDexPro 1 year ago
@LowDexPro What year is your truck? I have a 97.
TheCrwilliams 1 year ago
@TheCrwilliams i got an 01 F250 Ext cab long box. 756hp at the wheels and 1143 ft lbs of torque
LowDexPro 1 year ago
@F350turboDIEZEL u should fix that hahaha
RacerDude96 1 year ago
@terpreg 97 doesn['t have a wastegate
freddythestandard 3 months ago