@TheGbo562 Thanks. I love her the way she is but the bodywork and paint will be complete shortly. I'll be posting up her homecoming by the first of the year hopefully.
@70BBC4spd Here's the specs for 299THR7 Basic Operating RPM Range 2,500-6,100 Intake Duration at 050 inch Lift 243 Exhaust Duration at 050 inch Lift 257 Duration at 050 inch Lift 243 int./257 exh. Advertised Intake Duration 299 Advertised Exhaust Duration 319 Advertised Duration 299 int./319 exh. Intake Valve Lift with Factory Rocker Arm Ratio 0.570 in. Exhaust Valve Lift with Factory Rocker Arm Ratio 0.554 in. Lobe Separation (degrees) 107
@70BBC4spd Thank You. I'm running Hedman Huslers, 2 inch primaries with 3 inch collector into custom bent 2 1/2 's with X into Flowmasters then over the axle and pointed down.
Putting it into my 71 Camaro. Had a 350 in it but it's toast. So I decided to go 454 with a 4 or 5 speed, depending on what I can afford. I'm gathering parts now, hopefully I'll have it put together during the summer. The Big Mutha Thumpr seems like a pretty cool choice for a cam.
@petieg383 Yeah ...Can't beat the Ford 9. Kinda wish I'd gone that route. PO already had the tubes welded on mine when I got it and I got a new Eaton posi reasonable so I stuck with it. Bumped up to 30 spline mosers for a little extra insurance.
Sounds Aweseome. What tranny you got in that thing? I just picked up a 454 short block with 9:1 compression. I'm thinking of running one of these Thumpr cams. How do you like it?
Thanks. I really like it. Alot. Thing hits a pretty mean lick. Running an st-10 right now but want to get one of the new McLeod 5-speeds when they come out. What are you putting the BB in?
just a bit more than 10:1.
pablo112463 2 months ago
How much compression
chevroletiroc 2 months ago
Camaro split bumper cammed. Love it. Nice car man
mgbadboyz 2 months ago
I would drive her like that
mrchevynovass 3 months ago
shes not pretty at all!shes beautiful the sound of the big block makes up for everything
TheGbo562 4 months ago
@TheGbo562 Thanks. I love her the way she is but the bodywork and paint will be complete shortly. I'll be posting up her homecoming by the first of the year hopefully.
pablo112463 3 months ago
By your car not being beautiful, but having a setup like that, it's just saying to the others "Don't fuck with me. I'm not afraid of you!"
jamesb1221222 4 months ago
@pablo112463 wat size tires n rims r those?
merbs82 5 months ago
@merbs82 They are 245/50/17 front and 275/50/17 rear on 8 inch rims.
pablo112463 3 months ago
THUMPER CAMS ARE JUST MADE TO SOUND GOOD
wathacraftspfd 5 months ago
sorry it's 1972JasonRS tell me what u think I will b adding more videos now that she's painted
1972JasonRS 7 months ago
very nice I to am running a thumper cam in my 72 RS check it out.I would love some feedback.jason72rs
1972JasonRS 7 months ago
Amazing sound man.
braco222 8 months ago
Sounds badass man. I just sold my Lemans and bought a 71 camaro a week ago. post some pics with the new paint!
augustoescobar50 9 months ago
@augustoescobar50 Thanks. Checked out your LeMans. Looks like it was a solid old ride.
pablo112463 9 months ago
@63RaySS Thanks Ray! It's in the shop now for body and paint.
pablo112463 1 year ago
so Pablo what heads r u using and with what kinda stall?
TheFallguy11 1 year ago
@TheFallguy11 The heads are Dart Iron Eagles. Running a 4-speed for now. Hope to be going to a McLeod 5 speed in the future thou.
pablo112463 1 year ago
What are the specs on the cam? I know theres 3 different grinds of the big mutha thumpr cams for BBC.
70BBC4spd 1 year ago
pablo112463 1 year ago
@pablo112463
hows the vacuum?
70BBC4spd 1 year ago
@70BBC4spd Haven't measured vaccuum. Seems more than adequate though.
pablo112463 1 year ago
Sounds nasty..What exhaust you runnin?
70BBC4spd 1 year ago
@70BBC4spd Thank You. I'm running Hedman Huslers, 2 inch primaries with 3 inch collector into custom bent 2 1/2 's with X into Flowmasters then over the axle and pointed down.
pablo112463 1 year ago
Sounds good.. I love the wheels on that car! What kind are they? They look like 17 inch? What brand? NIce...
coldgin74 1 year ago
@coldgin74 Thanks. Yup they are 17's. Eagle Alloys.
pablo112463 1 year ago
Putting it into my 71 Camaro. Had a 350 in it but it's toast. So I decided to go 454 with a 4 or 5 speed, depending on what I can afford. I'm gathering parts now, hopefully I'll have it put together during the summer. The Big Mutha Thumpr seems like a pretty cool choice for a cam.
petieg383 1 year ago
@petieg383 You'll love the gobs of torque! Nothing like it. Good luck with your install. Pretty straight forward. Do you have a good rear for it?
pablo112463 1 year ago
@pablo112463 Yea. Got a 9" Ford with 31 Splines, a Detroit Locker and 4.30 gears. I'll be fine...
petieg383 1 year ago
@petieg383 Yeah ...Can't beat the Ford 9. Kinda wish I'd gone that route. PO already had the tubes welded on mine when I got it and I got a new Eaton posi reasonable so I stuck with it. Bumped up to 30 spline mosers for a little extra insurance.
pablo112463 1 year ago
@pablo112463 Yea. Got a 9" with 31 Spline axles, a Detroit Locker and 4.30 gears.
petieg383 1 year ago
Sounds Aweseome. What tranny you got in that thing? I just picked up a 454 short block with 9:1 compression. I'm thinking of running one of these Thumpr cams. How do you like it?
petieg383 1 year ago
@petieg383
Thanks. I really like it. Alot. Thing hits a pretty mean lick. Running an st-10 right now but want to get one of the new McLeod 5-speeds when they come out. What are you putting the BB in?
pablo112463 1 year ago