Painting A blink-182 Skateboard

[fillecool2]

I can't skate but I want tht board anyway

[bambihockey73]

You should sell these.

[Grubbsy4JC]

Dude that's freaking brilliant, great work. Me and my friend do this kinda stuff too, except with guitars. It's super fun.

[sumblinkfan]

@Grubbsy4JC i've got an old guitar from the 60s or 70s that i was going to repaint, just haven't gotten to it because it's missing most of the hardware and that stuff gets kind of expensive

[sumblinkfan]

I created a page for skateboard painting on Facebook (Official Skateboard Painting). Please "Like" it and help me make it complete with photos, videos, and discussions. Link in description.

[3ForPs]

so good

[systempatcher]

@LockoutBand inverts the picture, because its in negative it makes negative again. Turning back into the original pink and blue picture with a white background

[minimullen]

Great job man!

[Razor5987]

Howd you get the blink - 182 - stickers?

[sumblinkfan]

@Razor5987 i made them out of Office Max inkjet labels (full sheet). you put them in your printer and print the design on them, cut them out and put over dry paint, then spray over them, then pull them off

[isaacnewton101]

why didnt you just buy blue trucks..and especially the wheels....wow!!!there probably like all chipped by now..and you better put rails on that nice board next time to not scratch the paint!!...but after all the board looked great!!

[sumblinkfan]

@isaacnewton101 the board has never been used. once i saw how good it was turning out, i knew it would be for show. i didn't buy blue trucks because i didn't want to spend any extra money. kind of on a tight budget here

[TheTenaciousTim]

I WANT IT

[AngelsNairwaves1298]

well nice

[NewEraBoy11]

Sweetest fuckin' deck I've seen...

[PlanetDrumLtd]

How'd you make it into a skateboard design on the computer?

[sumblinkfan]

@PlanetDrumLtd i made a skateboard shape in microsoft paint and edited it

[PlanetDrumLtd]

How'd you make it into a skateboard designe on the computer?

[EKbentleypwns]

oh wow thats the same size of sandpaper i used to sand off my skateboard! It burnt several times though.

[sumblinkfan]

@S8OR hope it works out for you

[sumblinkfan]

@S8OR i'm sorry about that. the picture i used was from a previous project when i used a satin, i used a gloss on this one. i think i put that in the description. anyway that's my bad. i would recommend, if you want a glossy finish, to lightly sand the satin finish off a little bit using a 500grit and up. then recoat with a gloss. and actually i have started using Rust-Oleum Painter's Touch CLEAR coat gloss instead. i think it works slightly better and i believe it's cheaper

[WARRIOR2901]

I your selling, i bet loads of people would buy

[RedfireChef]

Awesome!

[ThePointlessShit]

I'm also a sum and blink fan ;)

[sumblinkfan]

@ThePointlessShit it's hard not to be with the quality music they both put out

[swiftcool7]

thats ciik

[JKninjaa]

wow

[mraidanpunk]

that is the most beautiful board i have ever seen. great job!

[sumblinkfan]

@mraidanpunk thanks

[Buheast]

very nice

[leotheloser]

aww man

it will be "link 1" once you put the trucks back on :(

[iamjaeiynoman]

aron shultz you hove the last name of my grandpa,but hes adopted to adams

[sumblinkfan]

@iamjaeiynoman it's actually sChultz, but that's cool

[leotheloser]

@sumblinkfan is the finish sturdy?

does it stick to the rail when you grind?

can water be trapped in between the wood and the paint?

[sumblinkfan]

@leotheloser i honestly don't know, i'd say the best thing to do would be to try it out on a blank, see how it works for you. if it doesn't, it'll sand right off especially with a power sander. there are many different types of finishing sprays so if one doesn't work, there's a chance that another will

[sumblinkfan]

@2104lammyboi no, but i do plan on eventually making another just like it and possibly putting it on ebay or something like that

[dascoolman13]

you are quite the artist and handyman nice job!

[iJumpLikeAWhiteBoy]

Beastly

[carolinebk182]

Awesome board! You like good music and good sports! =D take care xx

[juliandereus2]

damn thats an awesome skateboard! btw, you listen to very good music :)

[Sk8bordinAdiction11]

dude u shouldnt hav painted the wheels they start geting all peely and ugly after a few yards of riding and plus they looked sweet just how they were!!!!!!!  still awesum vid and happy skating

[MezSugamaddi]

sweet

[systempatcher]

PAUSE at :02

if you have a mac press and hold "command" "option" "control" "8"

look at the picture

lol you can take it off by doing it again

please THUMBS UP if this worked for you

[sumblinkfan]

@systempatcher wtf?

[systempatcher]

@sumblinkfan lmfao u need a mac for it

[jbiegun01]

@sumblinkfan it makes the screen inverted so the picture looks like the real colors again

[sumblinkfan]

@jbiegun01 oh, thanks for clearing that up

[systempatcher]

@sumblinkfan haha im sorry you pry think im fucking crazy xD

[sumblinkfan]

@systempatcher no someone else cleared it up, i know what you're talking about now

[markdeluca94]

@systempatcher lol it's true

[sumblinkfan]

@systempatcher finally understand what you meant, recently got a mac

[twista101287]

WOOOW U R AWESOME... SWEET DECK!!! ;-)

[shadykid3000]

can u make me a board like that

[vidsinthedump]

you can actually spray paint the trucks? with out getting them like.......worse to use for grinds?

[sumblinkfan]

@vidsinthedump no, i'm pretty sure they wouldn't work as well, but i wasn't planning on using this board

[ThorHammer17]

dude i don't even skateboard... i was watching a blink 182 bails montage, and this came up. it's freakin tight. i'm impressed.

[tumarkillsjr]

sell it make a lot of money

[kingraisin]

the board turned out amazing! that's also awesome how you made it a "how to" video as well so that other people can try to make their own graphics with good technique.

[The12luke21]

sick bord and nice mongoose trucks ha

[DJustice91]

That's fucking sick dude.

[mrhairynan]

DUDE YOUVE INSPIRED ME !!!!!!!

[stlrecruit123]

does this painting technique affect the flexibility of the board? and does the paint wear after a while?

[sumblinkfan]

@stlrecruit123 not sure, but i'd imagine just like the regular designs the paint would wear after use

[stlrecruit123]

@sumblinkfan the paint that you use doesnt crack or anything though?

[sumblinkfan]

@stlrecruit123 i haven't used any of the boards i've painted if you're asking about it cracking after use. it hasn't cracked without use. if you're looking for high quality paint i'd go with Rust Oleum, it's the best that i've used

[ongpohheng]

ppl will pay good money for it, awesyum shyt man

[marci1027]

ahahah mongoose trucks...

[marci1027]

AHAHAHAH he used mongoose trucks.

[erikflipskater]

omg that is one of the BEST board......is the best board i have ever seen seriously!!!! PROPS

[AnHeroDesu]

haha risers, scared of those wheels?

nice job, but why put on risers if you don't even ride it?

[trezzpazzerz]

dude nice do you use it?

[sumblinkfan]

@trezzpazzerz no, it's hanging on my wall

[trezzpazzerz]

dude nice

[BlinkFace95]

no disrespect or anything but i think it looked better without the trucks, i wud hang it up or something

[Hakosukaa]

amazing man

[s0me0ashley]

this is one of the best skateboard ideas iv ever seen great job too it looked perfect how did u make it look so flawless???? extra painting?

[sumblinkfan]

@s0me0ashley yeah, i did do some touch up work, but even before that it looked pretty good

[s0me0ashley]

@sumblinkfan oh ok thanks =] vid helped a lot im thinking of designing my own too (wont take ur idea promise =p)

[XTheRandomGuyX]

that is frickin' awesome!!

[kiwikraze565]

how long were drying times?

[sumblinkfan]

@kiwikraze565 for paint, anywhere from 3 to 15 min. for polyurethane, about 4 hrs.

[xXxMikexXx94]

that was cool. nice deck.

[montagesANDdisputes]

Very Professional, Nice Job!

[dukeidude]

I'm making one of these to hang in my room. Awesome job dude

[sumblinkfan]

@dukeidude thanks

[ffornesp]

Woaah that deck was so cool, amazing!

[xBurntxRainx]

canyou try a suicide silence board? thx man

[omarsharko]

thats sick man!!!! awesome job

[1xxunxnamedxx1]

Trucks and wheels are wicked! :D

[KatieLovesTomDelonge]

this is amazing!

[InternalSuffering14]

what's the name of the song from t he start?

[ReelEZProductions]

if u sell it... it would be the best complete skateboard ever.... actually id buy the deck itself.... xD u shud sell em... cuz id buy it

[snitzcore]

epic win

[Rockysbeats]

what did you paint the trucks with?? does it have to be a certain paint for painting on metal?

[sumblinkfan]

@Rockysbeats i'm pretty sure that most spray paints work with metal, however i know that there are a few that are made special for metal, Lowe's sells a special Rust Oleum specific for metal

[satanssk8er666]

Dude thats freaking tight if i got you a blank deck and paid you to make me one cause thats the coolest ting ive ever seen

[phxc16]

the deck it's awesome but why paint the wheels?? that doesn't work

[AdamPDM]

dude, thats too sick to ride on! nice work

[Mlocke69]

haha mongoose trucks

[KillYoFam97]

I can really see myself getting into this kinda thing.

[kingdomtinkerbell]

fuck i want that board =P

[quainhankid14]

Wish I knew how to skate ! I love your board !

[slvrvolcomstone]

@ng1150 yeah he would and im starting to do the same :)

[REDBULLextremboarder]

wow!

i love blink 182

and i love skateboarding!!

good job

fucking good!

[SurfStefGoldCoast]

Great Job on the board, I am wanting to making one over this summer :).. would you mind telling me the brands of paint, trucks, deck, spray, tape etc you used.. GREAT JOB! Also how did you make the stickers - and what material did you use for them to?

I've rated up, subscribed :) Thanks!!

[sumblinkfan]

@SurfStefGoldCoast no problem, i used rust oleum blue and white paint which i highly recommend. valspar red paint, it wasn't as good but still quality paint.

-the trucks and board were just mongoose, i didn't want to spent a lot of money

-the tape, i believe, is 3/4 in. 3M painters tape

-the stickers are made from office max full sheet inkjet labels, they go in your printer, you print the design on them, cut it out, peel off the back, and put it on the board over a color you want to remain

[SurfStefGoldCoast]

@sumblinkfan Cheers Dude :) You're boards are sick.. after i watched ure vid i was gunna make an AVA board but now i saw u already have.. Do you watch fantasy factory? Im gunna make a dyrdek board.

[sumblinkfan]

@SurfStefGoldCoast i love Fantasy Factory, can't wait for the new season, good luck on the boards, i'd like to see how they come out so if you don't mind sending me a picture or uploading a video that'd be great

[SurfStefGoldCoast]

@sumblinkfan hey man just got the paint, im starting my fantasy factory board... its my first attempt ever so i dont no how it will come out... ill post a vid soon!!

[sumblinkfan]

@SurfStefGoldCoast sounds good

[Rockysbeats]

@SurfStefGoldCoast cool doing the same so ill post too!

[SurfStefGoldCoast]

Great song choice!

[esehnono]

that board iz fukn glorius

[guitarallstar11]

what brand deck did you use?

[sumblinkfan]

@guitarallstar11 mongoose, i was trying to keep it cheap

[iZEROxSKATERi]

can u make me one? ill give you $150 if you can make me one like that with the trucks, wheels, bearings as well as the deck!

[sumblinkfan]

@iZEROxSKATERi i think i might make one sometime this summer, just the deck, and put it up for bid

[jamesal]

impressive stuff essay

[ThreeWordsUnspoken]

Take a video of you skating on it!!

[ReddyElesisxz]

ITS SOOO HOT DUDE !!!! But you sprayed the wheels and trucks,the trucks didnt rust or got stuck ? and the paint on the wheel doesnt fade ?

[sumblinkfan]

@ReddyElesisxz the board was just for show once i realized how good it was looking, i took some people's suggestions and just took off the trucks and wheels and hung up the deck

[WarrenAndJeremy]

greatest most bad ass deck of all time!!! i want one sooo bad!

[TheFateskaters]

thats amazing i'd but that at a shop!!!!

[clifgreen3]

i made one, but i made the smiley stencil and put it on my griptape. now i am putting it on the board itself, but im using a green mini logo

[sumblinkfan]

@clifgreen3 send me a picture or two when you finish it, if you don't mind, i'd like to see how it turns out

[clifgreen3]

@sumblinkfan well i dont know how to send pictures, but i am making a video of it. it will be up tonight

[clifgreen3]

@sumblinkfan im uploading the video right now

[lucasthereimdone]

i will buy it

[felito23jordan]

griptape?

[sumblinkfan]

@felito23jordan what about it?

[PeanuTeam]

Nice job !

[Jacobiskoby37]

I want one.

In my hands.

Right now.

[OfMiceAndMen92]

dude that's fucking tits lol. i love it. =D

[beezRscary]

thats ace

[ohaiiigorgeous]

Holy shit, That is fucking AMAZING.

[robx10x12]

when you say sticker for the 182 part did u actually use a sticker or was it paper and how can u keep the paper stuck down without ruining it. Nice deck

[sumblinkfan]

@robx10x12 i used paper that had a sticky side, you feed it through your printer to get the design you want (182 part), cut it out, and use it to make the design on the board with paint, when you're done painting it just peels right up as long as the paint had enough time to dry

I didn't let the paint dry properly before i placed the stickers on this board as you may see in the video picture, the "2" didn't peel up cleanly, i had to use goo gone to lift it because it was just that stuck

[BMXorHOMICIDE]

i think you shouldve just hung the deck up fuck wheels n shyt... nice job!!

[sumblinkfan]

@BMXorHOMICIDE the nice thing about painting the wheels and trucks as well is that if i want to display it as a complete or just the deck, all i have to do is remove the trucks, which i have considered

[zaqw1111]

dude CLEAN

[Hoosim14]

@zaqw1111 check out my sk8board art in my vid

[LordiOxKalmaKita]

Thats amazing! You should make more of these.

[skater123176]

hahahaha monguse trucks

[TheWaffleWorld]

o i c thts good

[5secondfuse]

nvm. that was before i watched the whole video. nice job, haha

[5secondfuse]

very, very amature

[TheWaffleWorld]

r u guna skate with ot evr i wouldnt if i liked them

[sumblinkfan]

no, it's on a shelf in my room, i wouldn't ever let it touch the pavement

[sk8dc9586]

id pay u 100 if u made me one

[yankee5456]

thats sick !!! i've got an old deck that i sanded down a few months ago, i just need to get the paint and clear finishing spray . that i cant get until i get some spare cash ! .. any way ... great vid !!

[shibbyman90210]

i used to be a huge blink and sum 41 fan and now i can berly stand them

[Koolademan5654]

dude you should sell your boards

[sumblinkfan]

i'm trying to make another one this summer for someone, i don't think i could part with this board, too much sentimental value to it

[StiffsMom]

i tried it my self and it`s just amazing!!!!  Dude, very best board i`ve ever seen !

[jakecosta96]

i dont like blink -182 but that board looks amazing!!!!!!

5 stars*****

[ng1150]

Dude i bet you could make some good money off these on ebay or something.

[SkateDinarox]

5 stars! Very good! Nice job!

[SoundsGayProductions]

amazing. truly amazing

[poisonesmipadre]

ya me puedo venir?

[el90moro]

Ultimate Skateboard!

[zeusitaliano2]

AWESOME!

[KingChesnut]

that is freaken dope!

[halochamp2]

that is soo cool

[kenny8954]

that is one of the sickest boards ever. good job

[hurtinsqurtin]

Fukin walmartt trucks thats the only mistake

[blast2hart37]

Im not that much of a fan of blink 182 but...

Speechless at the beggining when u messed up on the last 2 numbers i thought u had no chance to fix it but you did it!

5/5

[BlinkInfo]

Dude this is epic!!!!

[NYYandCHC]

great board i want one, also you chose two of their best songs!

[BroknSircut]

NEVER EVER SKATE THAT BOARD

Get it signed asap

[BlinkInfo]

@BroknSircut

exactly :)

[el85044]

Fuckin awesome

[woodstermiester]

that is a fuckin rad board i so want 1 lol

[Wonderboy21714]

I want that board. If I didn't suck at doing projects like this I would totally make one like that. Good job.

[charlietheunicorn121]

Where did you get the blank?

[sumblinkfan]

the board was a $10 mongoose from Target, i sanded off the design that was origionally on it

[charlietheunicorn121]

Okay, thank you!

[MissJackassMeintJenn]

Wow. Lot of work - but looks really good in the end. But I would have chosen an other motiv ^^

[All82ndAmerican]

amazing

[manuelo34]

ereslamierda

[skatebreak]

sweet deck - turned out great. but my question is, does the board still slide smoothly when you grind?

[sumblinkfan]

i haven't tested any of the boards yet, but i would imagine that they would especially if you used some type of wax

[JMort95]

nice i remeber being one of the first veiws of this vid. now you have a thousand good job

[sumblinkfan]

thanks