Added: 3 years ago
From: ls1chris
Views: 26,061
Sort by time | Sort by thread (beta)

Link to this comment:

Share to:

All Comments (61)

Sign In or Sign Up now to post a comment!
  • A whole video showing an ass end of a Firebird at idle? Were you warming up the car for mom, so you could go to the grocery store to get more animal crackers?

  • @heatman74 The purpose of this video was showcasing the the cam and Exhaust setup with minor Rev.And take a look at the Back glass.And this is my car built and paid for by me.But i do love me some animal crackers

  • Love the idle but flows sound crappy open throttle

  • Sounds like a bunch of beans rattling around in a can.

  • Well i have the slp intake installed already. Im getting the flowmaster Tmrw. I want to hit 350 hp on the car. Not for racing though and Im also thing about putting ngk plugs too

  • @sraider012 are you going with the cross flow 80 series or another .As i was not a fan of the 80 series and switched to a Xpipe setup which gave some better power and sound along with Headers.But for quick gains i would Recommend Lt headers Xpipe ,And you can also do some Free mods that will gain a little bit for no money at all like Free ram air mod,Polished and Ported Throttle Body and Maf.And also A good Tune can net you upwards of 15+hp on just a Solid Tune on a bolt on car

  • Hey dude i have a 99 TA.. I have about 600 bucks that i would like to put on it. What do ya recommend?

  • @sraider012 It Depends on what you goals is for the car and what other mods you may have.For starters i always recommend a good exhaust and intake system for better enjoyability and power

  • do you know what your hours power gain was with this set up

  • @PerryFogg i never had it on the dyno when it was stock .But after the mod's it put down 380 rwhp

  • HOW MUCH WOULD THAT COST TO DO THIS GUYS? Im trying to get my wife to bite on me getting my car back. See in 2004 I sold my 2000 ws6 pewter w/t-tops&6 speed. I am regreting it now as im older. I REALLY WANT MY CAR BACK!!!!

  • @toddandjillian in my setup which is texas speed camshaft package with Dual springs ,Headers,Full exhaust,Ls6 intake,Comp cam Lifters,I had roughly 1200-1300 i would say as i done all the work except the tune .But i would not recomend a cam swap right off the bat unless you had supporting mods suchs as headers/exhaust because without those you will not see good gains.with the set up i mentioned and tune my car put down 390 rwhp with a tune set up for Driving daily

    

  • @toddandjillian divorce your wife get the car back

  • What exaust is that? sounds amazing, and i dont see and ground clearance problems. the only true dual ive seen is the texas speed one, and it seems to hang down too low.

  • @pepene93 It is a custom set up i had built at a local Exhaust shop.It is a 2.5inch x pipe to single chambers flowmaster 10 series dumped at the axles.Ground clearance is Great,im stock height and never rubbed with a 3 inch pipe you may have some clearance if you are lowered

  • @ls1chris im currently at stock height, but i want to keep the option of lowering it open if possible. doesnt seem like it though. thanks

  • @pepene93 Well i would recommend going with a 2.5 inch setup then .You will have a little more clearance and a smaller muffler type like a Bullet type and that will help with clearance issues.with a 1-2 inch drop this should offer minimum issues.It may rub if you go over speed bumps a little fast but other than that it should be fine and sound Really good!

  • @ls1chris im not really worried about being able to go over bumps *fast*. i dont mind careful, but sometimes, you just have to go over things like speed bumps.

  • Dude, your car sounds so good! I cannot wait to get a TV2 in my Camaro!!!

  • Jacob the typical Pontiac hatter

  • @jacobzjf this was just showing the new exhaust off they are other vids of me moving a few inches on here lol

  • @jacobzjf Trans Am's don't have to move, everyone already knows they're bad ass. :P

  • @jacobzjf

    you are wrong...

    0:44 - the body is moving

  • what is the lsa on the cam

  • DEF. One of the best sounding TA's on youtube in my opinion!!

  • Best sounding T/A in my opinion, if not, then a tie with Mr Luos.

  • Yea for sure man, aint nothing like a cammed LS1, Mr Luos's is badass as well.

  • sounds good but with the x-pipe and flows it sounds too much like a stang!

  • Epic ride BRa got a 01 formula haha i pwn ws6s allday for some fucked up reason i love doin it tho MMUAHAHAH

  • 0:45 broke my ear drums

  • Have you had it on the dyno yet?

  • Comment removed

  • Hey, you almost copied my username!

  • you have to hear and see a car like this in person to truly appreciate it

  • flowmaster sucks unless its the single chambered. i never got why people would ever put a chambered muffler on

  • i am running the single chamber's,i agree though the 80 series chambered flows suck balls badly

  • what gears are in it?

  • What kind of gas mileage u looking at and hows it act in heavy traffic

  • i am getting around 20-25mpg highway and around 15 -18 in town i would say.i never really pay that much attention to it.because just driving back and forth to work $10 usually last me 3 days

    ls1s get great gas mileage for the what they are ,but it all depends on your driving habit and how wild you go with a build.

    i drive the car daily it is my only car at the moment and it acts like a stock vehicle driving it when its warmed up .

  • holy hell! nice!

  • yea pred z and patrick G can spec out some nasty cams!

  • hey buddy you owe me some computer speakers ! lol..j/k sounds badass!

  • Hey j thanks man im still unsatisfied with the sound so i will probaly swap out exhaust again for the 3rd time lol once i get the new cam specs worked out

  • Like I mentioned to Gixxer...SLP Loudmouth kit. My buddy had longtubes and loud set on a 99 SS cammed and chipped. Hit 130 mph no prob and sounded mean as fuck doin it. Redline while parked... will make ur ears hurt! But its a good hurt..lol ;) good luck man.

  • i had the loudmouth kit before my TDs and it was annoying. borla sounds good on cammed cars but its expensive. id stick with the TDs and go with spiral flows or xr-1s

  • id stick with the duals and maybe swap to spiral flows or borla xr-1s.

    btw check out my vids when u get a chance

  • SuperTruck1, I'm taking my SS to the shop this weekend to get my Torquer V.2 put in. I'll be running the SLP New design LT's along with the SLP loudmouth....it's already loud enough. lol Can't wait to hear it with the cam....cops gonna have fun writing me up with sound ordinances. lol I will put up a vid once I get the cam in.

  • Dude, you will go insane. Until last year I was running my Z28 with this cam, Pacesetter LT headers, off-road y, and the SLP loudmouth. I wanted to shoot myself through the ears after 30 minutes of driving. The worst part is that the car was too damn loud to go through a drive-thru!

    If you check through my vids in my profile, you'll see three of my Z28 running that set-up.

  • Yeah man, I'll have to check out your vids with that setup. Personally, I like the loud, raspy, rough idle. It sounds mean...and the Torquer V.2 can back it up with performance. Of course, I will normally be taking the car out only on the weekends.

  • If you have a daily driver, it isn't so bad. I had a daily driver for a while and was cool with the noise every once in a while. Then I had to daily drive my Z28. Even now after I have another daily driver again, I want to go back to stock exhaust with an electric cutout. My brother has a cam'ed '02 SS, and that thing sounds pretty quiet when just driving. When the cutout is open it sounds just as loud and raspy as my car.

    Food for thought.

  • Yeah, I hear ya man. I'm thinking of going with a CORSA sport cat back. That would make it quieter...

  • @ls1chris chris, hook yourself up with a corsa! best money i ever spent!!! car souds great btw, even with the flows

  • @collinsgto if i change the exhaust out again this summer i will end up with corsa or borla and a 3 inch x pipe instead of the 2.5 i have now.I always wanted to go bigger with my x pipe just for a deeper sound also.

  • @collinsgto Gmmg all the way for the F-bodys bro

  • sounds good. i almost went with flows but ended up goin with dynomax bullets. what cam are you considering next?

  • either the TSP tsunami cam or have Pred-z or patrick G spec out a custom cam a little bigger than wha ti have now.

  • bullets are cool...Flows will help vacuum exhaust from the motor increasing power. SLP Loudmouth setup is also a beautiful setup.

  • What LSA?

  • 112+0 lsa

  • badass exhaust my fellow chris :D

  • hey chris, i love your set up, im aiming for something similar on mine, what lsa is your cam set to?

  • it is on a 112 lsa, but i plan on switching cams soon and going slightly bigger and on a 110-111 lsa should sound nasty

  • dam i want a cam with my flowmaster setup...

  • Dang that sounds like the meanest trans am iv'e ever heard!!

  • Damn son. that sounds extremely mean.

    i have a 98 SS that is about to get a true dual setup, and cold air and a 4.10 gear

  • Damn Chris it looks like you got some 325/50's on the back in this video lol!

  • in spring time i shall either that or 315's.With some Prostar's all the way around .And maybe 1-2 other surprises

Loading...
Alert icon
0 / 00Unsaved Playlist Return to active list
    1. Your queue is empty. Add videos to your queue using this button:
      or sign in to load a different list.
    Loading...Loading...Saving...
    • Clear all videos from this list
    • Learn more