ufff, from jeti models i know then communication between jeti-box and other jeti-device is on some closed protokol /no spi, twi, uart ../ i have some special software for your tx?
All you need is an Osziloscop, a sheet of paper and the abilitty to write 0 and 1 and within 10-15 minutes you know what happens... than you need a ttl-convert and a pc, and 30-60 minutes later you know what you've to do, it's harder to find out what display-controller is used in the MPX EVO.
so, communication of jeti-device is uart at ttl-logic? which baud rate, parity? a dont understand how you set mpx firmware to communicate with jeti transmiter
it's 1-wire uart, right, just scope it, you'll see baudrate, bits, parity and stopbits, the firmware isn't changed, i used an HC157 to "relay" within the FFC-Cable
Comment removed
gigitrex 1 year ago
tutorial please
gigitrex 1 year ago
It's absolutely super !!! Where can I get it (or buy it, or order it)?
thx for reply
Milan
stejskalmil 1 year ago
Hey richtig gut gemacht !!!!!!!
Hallo vielleicht könntest du eine Alneitung oder ähnliches ins rc network machen (bitte bitte).
Mfg Dongus
dongiman 2 years ago
any chance you would do a tutorial?
You would make alot of EVO owners happy...including me. Nice work !
tijssens 2 years ago
ufff, from jeti models i know then communication between jeti-box and other jeti-device is on some closed protokol /no spi, twi, uart ../ i have some special software for your tx?
tmxatcoxlab 3 years ago
All you need is an Osziloscop, a sheet of paper and the abilitty to write 0 and 1 and within 10-15 minutes you know what happens... than you need a ttl-convert and a pc, and 30-60 minutes later you know what you've to do, it's harder to find out what display-controller is used in the MPX EVO.
TroublemakerD 3 years ago
BTW: i have not modified the original MPX Firmware...
TroublemakerD 3 years ago
so, communication of jeti-device is uart at ttl-logic? which baud rate, parity? a dont understand how you set mpx firmware to communicate with jeti transmiter
tmxatcoxlab 3 years ago
it's 1-wire uart, right, just scope it, you'll see baudrate, bits, parity and stopbits, the firmware isn't changed, i used an HC157 to "relay" within the FFC-Cable
TroublemakerD 2 years ago