Energy sources without the need for fuel or energy input exist ,But the Establishment doesn't want ppl to know this,Get a REAL working magnet motor at LT-MAGNET-MOTORdotCOM ,Join the revolution!
Great ideas, Andy. I have seen this design using a pick up truck hd axles and hubs but years B4 YT. Would you consider framing the camera shot, hitting play, and then describing and demonstrating the design instead of moving the camera to and fro? Just mount the camera somehow, if you don't have a tripod, and open up the shot to include a 2 foot wide area. In this area you can demo all the parts and pieces by holding them nearer the lens. Is there any way you can synch the audio to the video?10q
divide the total RPM off motor by Voltage all stamped on ther motor, that = the RPM to get 1V to get 13 V to charge 12 V batteries X the RPM for 1 by 13 this = the RPM to cut-in speed
hi thewindmillman,good job,but friend i m in doubt
and want to know,why all use 1 coil plate and 2 magnet plates?plz let me know,cos coil remain on 1 side of the plate,on the back side,may be effected by the magnets anyway.......plz need inf,thanx
the coil plate has the coils squashed to the thickness of the cast eg 12.5mm in most cases, and the mag plates are to pull the magnetic flux through the coil as they are set up to attract each other accross the coils eg N - S opposites attract but one mag plate also works but a about a tenth of the power
I know my vid and audio are very out of sinc but hay i now got electricity in my house seem like you have problems understanding all my videos as you put this comment on them all heres how i help you out sir
In the booklet ....How to build a windmill ....that i have put togerher, and also I sell, for £15.50 sterling per unit, there are all the details on how to build one for yourself in your back yard or out house from 12V systems too 48V systems for the micro power make
I'm sorry Andy, I am not just complaining to be mean or for no reason, I REALLY can't understand anything you are saying. It's a shame cause you have such a good video about wind turbines. Maybe someone could help you with it? I may order your instructions, but I just hope I don't need to call you on the phone for help.
I think next time i make a video i will try and make my words clearer ,as i do have a rather thick accent soz bud, it the l locals here (and the whiskey) we all talk funny LOL anyway
I had to watch Orphans with the subtittles turned on. The vids are great. Just need a bit of production work. Yeah it's cheesy but it makes for a good video. Plan out what you're doing, have a script, cut out what doesn't work...
Language: - English like all english speaking nations, but I live in gods country, Scotland on the west coast, my video and aud is out, and it did get a little technical, sorry you cant understand good info in it
This has been flagged as spam show
Energy sources without the need for fuel or energy input exist ,But the Establishment doesn't want ppl to know this,Get a REAL working magnet motor at LT-MAGNET-MOTORdotCOM ,Join the revolution!
prollandjayver 1 year ago
This has been flagged as spam show
Free Energy is real and its here but the coverup is strong, if you are interested in a REAL free energy machine then
just search for the LT MAGNET MOTOR in the youtube video search , it is probably the ONLY working magnet
motor out there. Join the free energy revolution!!
despinapjr 1 year ago
Great ideas, Andy. I have seen this design using a pick up truck hd axles and hubs but years B4 YT. Would you consider framing the camera shot, hitting play, and then describing and demonstrating the design instead of moving the camera to and fro? Just mount the camera somehow, if you don't have a tripod, and open up the shot to include a 2 foot wide area. In this area you can demo all the parts and pieces by holding them nearer the lens. Is there any way you can synch the audio to the video?10q
chubbsuperfly 2 years ago
What IS that, Gaelic?
tubularguynine 2 years ago
I wish i knew what you said. I'm a hillbilly american sorry.
batteryphil 2 years ago
bit of a hillbilly my self or at least i like to think so
regards andy
TheWindMillMan 2 years ago
It's looks very smooth-running.
Great work.
I have a new playlist:
"Craftsman of the world"
And this video are welcome...
5 Stars
skywatchbretten 2 years ago
cheer my friend yes that sounds great thank you see my other videos before you use this one
andy
TheWindMillMan 2 years ago
Hi Andi,
I saw he other videos.
we work since nine month on a windmill.
VAWT, and the smotth-running was/is the main problem....;)
My favorite video is this here... :)
skywatchbretten 2 years ago
to bad i cant understand him
starv49 2 years ago
thewindmillman,sir plz tell me how to determine voltage of a generator at a certain point of rounds....?thanx
tordherflower 2 years ago
divide the total RPM off motor by Voltage all stamped on ther motor, that = the RPM to get 1V to get 13 V to charge 12 V batteries X the RPM for 1 by 13 this = the RPM to cut-in speed
regards andy
fae West Of Scotland
TheWindMillMan 2 years ago
thank u andy,take care
tordherflower 2 years ago
hi thewindmillman,good job,but friend i m in doubt
and want to know,why all use 1 coil plate and 2 magnet plates?plz let me know,cos coil remain on 1 side of the plate,on the back side,may be effected by the magnets anyway.......plz need inf,thanx
tordherflower 2 years ago
the coil plate has the coils squashed to the thickness of the cast eg 12.5mm in most cases, and the mag plates are to pull the magnetic flux through the coil as they are set up to attract each other accross the coils eg N - S opposites attract but one mag plate also works but a about a tenth of the power
regard andy hope this helps
TheWindMillMan 2 years ago
thanx a lot friend,i got it
tordherflower 2 years ago
your welcome sir
andy
TheWindMillMan 2 years ago
Beam me up Scotty! I still can't understand a word. Your sound cuts off about 3/4 through all your video's.
breezebro 2 years ago
I know my vid and audio are very out of sinc but hay i now got electricity in my house seem like you have problems understanding all my videos as you put this comment on them all heres how i help you out sir
In the booklet ....How to build a windmill ....that i have put togerher, and also I sell, for £15.50 sterling per unit, there are all the details on how to build one for yourself in your back yard or out house from 12V systems too 48V systems for the micro power make
regards andy
TheWindMillMan 2 years ago
I'm sorry Andy, I am not just complaining to be mean or for no reason, I REALLY can't understand anything you are saying. It's a shame cause you have such a good video about wind turbines. Maybe someone could help you with it? I may order your instructions, but I just hope I don't need to call you on the phone for help.
breezebro 2 years ago
I think next time i make a video i will try and make my words clearer ,as i do have a rather thick accent soz bud, it the l locals here (and the whiskey) we all talk funny LOL anyway
TTFN Andy fae west a scotland
TheWindMillMan 2 years ago
I had to watch Orphans with the subtittles turned on. The vids are great. Just need a bit of production work. Yeah it's cheesy but it makes for a good video. Plan out what you're doing, have a script, cut out what doesn't work...
THESPOCK 2 years ago
Regards star trek boy ???
my vid and audio never been go for earthlings only cling-ons, and borg's the new kings and queens of the uni can hear the real messages
TTFN
TheWindMillMan 2 years ago
I understood maybe 3 words the guy said. What language is he speaking?
pops8632 2 years ago
Language: - English like all english speaking nations, but I live in gods country, Scotland on the west coast, my video and aud is out, and it did get a little technical, sorry you cant understand good info in it
regards andy the scottish one
TheWindMillMan 2 years ago
great generator,how many magnets did you use
mladenkorotaj 3 years ago
depends on coils i hade 12 coils so 16 mags per plate
TheWindMillMan 3 years ago