Sorry I didn't see the question earlier. I guess ya figured out that all ya need to do is pull the e-clip off and then the rod eye slips off.
If you tighten it down farther and can't get the rod back on the wastegate actuator, just remove the hose from the actuator and use some compressed air. This will extend the wastegate rod and let you slip it back on the wastegate lever.
The headlights are off the 2006 SRT10 NightRunner. The tail lights are from a company that I will not name....total crap. Had to completely rewire them to work right.
The TC switch is to manually lock the torque converter.
Good shit that was motivating
jwells1501 2 years ago
what is ur boost at again i know u told me before but i forgot
kellysap1989 2 years ago
I max out around 72 psi.
cumminalong 2 years ago
im only gettin 50 is there a way to adjust the wastegate for more or do i need more fuel
kellysap1989 2 years ago
Shorten the wategate rod. Every full turn is approx 1 - 2 psi.
What size injectors and tuning are you running.
cumminalong 2 years ago
i have 150 hp injectors and a smarty edge comp stack
kellysap1989 2 years ago
and how do i pull the rod off the turbo housing
kellysap1989 2 years ago
holy shit! i tightened it like 3 turns and the needle bounce stoped and my truck fuckin flys like nothing i have ever felt! thank you so much
kellysap1989 2 years ago
Sorry I didn't see the question earlier. I guess ya figured out that all ya need to do is pull the e-clip off and then the rod eye slips off.
If you tighten it down farther and can't get the rod back on the wastegate actuator, just remove the hose from the actuator and use some compressed air. This will extend the wastegate rod and let you slip it back on the wastegate lever.
cumminalong 2 years ago
@cumminalong where did you get the headlight and taillights from? Also the torque converter switch is that to lock it?
IronHorsekid 1 year ago
@IronHorsekid
The headlights are off the 2006 SRT10 NightRunner. The tail lights are from a company that I will not name....total crap. Had to completely rewire them to work right.
The TC switch is to manually lock the torque converter.
cumminalong 1 year ago
turbos sound awsome
CUMMINISDEZEL 2 years ago
Sick!
BLOWN287 2 years ago
nice truck
engineman4561 2 years ago
That awesome! I bet you have a lot of money in mods.
DanielJaegerFilms 2 years ago
sweet truck! name of song?
07dodgecummins07 2 years ago
Rev It Up!
Jesse James Dupree and Dixie Inc.
cumminalong 2 years ago