the backdrop is moving a lot, I suspect someone is using airflow to influence the device and make it seem to move more or longer than it would on it's own...
I wish that were the case. I'd like to be able to get these things to move in a breeze but they don't. The reason it moves at nearly a constant speed is due to the inertia stored in the hammers and the low friction of high quality ball bearings mounted in perfectly aligned hubs. No tricks.
See "Waltzing Hammers" for more information about how they work.
@Lotum4n I don't locate the balance points mathematically I use a tool I developed to find the points. There are too many strange shapes and variables to do it accurately with math. So no formula is used, they just are where they are.
@Lotum4n The mass on each end of each arm is balanced which is why they spin freely. The last arm has the hammers at an even distance from the pin so the hammers are the same weight. This arm with hammers is slightly heavier than the next hammer so the pin is closer to the final arm... and so on. The specific ratios used should not effect how freely the system moves. Higher ratios will make the system more eccentric though.
How very cool... Nice choice of materials...Could tell the way it was running you must have used bearings... Bet finding the exact balance points took a while... Very cool piece !!!
Very nice. A battery operated magnetic kicker would be nice to keep it running continually. The simplest kickers used in the olde-style perpetual motion ornaments just used two windings on a steel core and a single transistor. There was a heavy winding to provide the kick and a finer winding to trigger the transistor when the pendulums magnet approached. When the transistor started energising the kick coil it also provided positive feedback to the trigger coil to give a good meaty pulse.
Funny, There is no such thing as "perpetual energy" yet out universe runs off it. Them particles just keep spinning, no stopping to be seen. yet at our level we cannot harness this.. too much energy loss, friction, heat, etc... oh well.
@MrRespect26 all you have to do is buy a sledgehammer, 4 metal work hammers each 1 size smaller than the other, 5 nice quality skateboard bearings a stand for the main sledgehammer and then you just need a drill and a rubber mallet and a lil time ;]
Thanks for your comment. This system of balanced hammers was fun to conceive, construct and show. It, along with my other kinetic scullptures have given me an opportunity to use art to teach the basic consepts of mechanical energy to the general public.
I've been working on something that can harness energy from this, but anything I do to it loses energy in friction or other resistance. Using a double pend. Tried a triple but it often drags the entire device to a halt when there are two opposing forces on an axis against gravity.
My hammer system does appear to be perpetual motion but as with all mechanical systems, it is not.
It is operating with the initial energy that I put into it with a push just before starting the video.
I use precision bearings and hubs to minimize friction loss but over time the system will slow down.
Any attempt to harness this energy (remove it from the system to use elswhere) will quickly drain the initial energy and, as you found, drag the device to a halt.
@shadowman080....We are all made of atoms with electrons spinning about them at great speed. I don't know how they got started spinning, and I don't know how to stop them, do you?
PINK FLOYD
RuinaInevitable1 1 week ago
ratio of leghts and mass, please.
archanqel666 2 weeks ago
Can you connect a turbine to this to make renewable energy?
Softeyes1 2 weeks ago
Reminds me of an iCarly episode. Im not sure if i should be ashamed by that...
sphinx245 1 month ago
is this random, or is there an actual algorithm going on here....?
normallyjunk 1 month ago
I wonder how many hammers it takes to make it fall over...
Diggydiggyholeful 2 months ago
Not exactly perpetual I presume, as to be expected, but really close. I'm impressed.
Something2look4ward2 2 months ago
how do you start it
rocker6219 2 months ago
@rocker6219
Start it by giving it a push. See "Waltzing Hammers"
kenkineticart 2 months ago
cool. infinite energy.
edzen07 2 months ago
The next one you do can be called "Hosea's Hundred Hammers"
springhill1958 2 months ago
the backdrop is moving a lot, I suspect someone is using airflow to influence the device and make it seem to move more or longer than it would on it's own...
MrJohnDevour 2 months ago
@MrJohnDevour
I wish that were the case. I'd like to be able to get these things to move in a breeze but they don't. The reason it moves at nearly a constant speed is due to the inertia stored in the hammers and the low friction of high quality ball bearings mounted in perfectly aligned hubs. No tricks.
See "Waltzing Hammers" for more information about how they work.
Ken
kenkineticart 2 months ago 7
@MrJohnDevour lack of science knowledge fail
EyesFat 2 months ago
@MrJohnDevour you may have a point but the counter weight is a sledge hammer. Wouldn't they a stronger airflow than indicated by the back cloth?
Anonymous01959 2 months ago
All in all you 're just another brick in the WALL
rammbostein 3 months ago
does it need batteries
futsalfred2 3 months ago
@futsalfred2
No batteries, it runs on inertia.
KenKinetic
kenkineticart 3 months ago
ok now who watched the whole thing ??? i know i did
juicebox232 3 months ago
If you connect the bottom hammer to a pump that will be infinite energy :O
ThePrickStick 3 months ago
@ThePrickStick No.
Aviatorsmith 3 months ago
i made something like this in Little Big Planet.
pHappyfeet 3 months ago
Any tutorial on how to make this hammer?
Like materials used, how to make it, etc...
MrTestosteroneboy 3 months ago
@MrTestosteroneboy
You can watch me build a set by viewing "Making Waltzing Hammers". I have no instructions or plans available.
kenkineticart 3 months ago
this is so cool!!!!!!!
StarDestroyer5 3 months ago
So many degrees of freedom..
saint7412369 3 months ago
Comment removed
ApolloWasReal 3 months ago
I heard you liked hammers so...
demonhand 3 months ago
Put this in a car..."My car runs on Thors hammer's"
xpez 3 months ago
is this also same as what i have seen in Iron Man 2?
12TreaL11 3 months ago
I want this on the next funfair! =D
Seelenfeuer666 3 months ago
That would make a puke-a-licious carnival ride.
rickreed123 4 months ago
it is very beautiful.
gnowave 4 months ago
GAYEST MACHINE EVER XD
RoboticusMusic 4 months ago
@RoboticusMusic You misspelled troll.
Gafaton 4 months ago
@Gafaton what? a Troll hammer? Fucking Nerd.
RoboticusMusic 4 months ago
Is the time it takes to stop after a certain amount of initial energy constant?
wthrfish 4 months ago
yo dawg, i heard you like hammers, so i put a hammer in your hammer so you can look at hammer while you look at hammers
AndreasFalk8 4 months ago
Dude, this could work as a ride at some park or something.
or a clock. That'd be so cool.
Theonegamefreak 5 months ago
A variation on the old 1960s Mobile.
Neat twist on the idea.
Texmurphy51 5 months ago
What is the calculation you used for each hammer where the pin is located approximatly ?
1/8th the weight of the hammer ?
Im just curious .
: Tim
Lotum4n 5 months ago
@Lotum4n I don't locate the balance points mathematically I use a tool I developed to find the points. There are too many strange shapes and variables to do it accurately with math. So no formula is used, they just are where they are.
kenkineticart 5 months ago 9
@kenkineticart "There are too many strange shapes and variables to do it accurately with math."
You sir, are obviously not a physicist. But skilled nonetheless.
honorific88 1 day ago
@Lotum4n The mass on each end of each arm is balanced which is why they spin freely. The last arm has the hammers at an even distance from the pin so the hammers are the same weight. This arm with hammers is slightly heavier than the next hammer so the pin is closer to the final arm... and so on. The specific ratios used should not effect how freely the system moves. Higher ratios will make the system more eccentric though.
Idiomatick 3 months ago
woah
CreeperSsssMC 5 months ago
How very cool... Nice choice of materials...Could tell the way it was running you must have used bearings... Bet finding the exact balance points took a while... Very cool piece !!!
56tony1 5 months ago
Makes you wonder if someone could make an amusement park ride out of this. ;-)
anduschatz 5 months ago
yo dawng, I heard you like hammers
8element 6 months ago 3
When I was looking at this, I was like O:
Oshyrath 6 months ago
Hmm... "Hammer Time!" xD
Duraltia 6 months ago
I can watch this all day o.O
basantologist 8 months ago
It just some spinning ha- ALL GLORY TO THE HYPNOHAMMERS
leatherfacefan1974 8 months ago
Add some LEDs
megamaa 8 months ago
Still reminded of the thing on Pepper's desk in Iron Man 2.
CatsRuleDogsAreTards 8 months ago
@CatsRuleDogsAreTards :D
megamaa 8 months ago
Why am I laughing my ass off at this? xD
N0tsaved 9 months ago
very cool!!
therealbasskiller 9 months ago
wtf is this soo interesting?
The21Area 10 months ago
will this ever stop?
iloverikku714 10 months ago
Very nice. A battery operated magnetic kicker would be nice to keep it running continually. The simplest kickers used in the olde-style perpetual motion ornaments just used two windings on a steel core and a single transistor. There was a heavy winding to provide the kick and a finer winding to trigger the transistor when the pendulums magnet approached. When the transistor started energising the kick coil it also provided positive feedback to the trigger coil to give a good meaty pulse.
bigclivedotcom 10 months ago
Funny, There is no such thing as "perpetual energy" yet out universe runs off it. Them particles just keep spinning, no stopping to be seen. yet at our level we cannot harness this.. too much energy loss, friction, heat, etc... oh well.
sacr3 10 months ago
this is godly.
073468magnuM 11 months ago
where can i buy this i really want one
MrRespect26 11 months ago
@MrRespect26
To purchase you can contact me by visiting my KenKinetic website.
kenkineticart 11 months ago
@MrRespect26 all you have to do is buy a sledgehammer, 4 metal work hammers each 1 size smaller than the other, 5 nice quality skateboard bearings a stand for the main sledgehammer and then you just need a drill and a rubber mallet and a lil time ;]
sakiLOVER 10 months ago
@sakiLOVER
Try it, you'll be surprised.
kenkineticart 10 months ago
you lost the game TROLOLOL
XDlizzXD 11 months ago
Why am i reminded of the thing on pepper's desk in Iron man 2?
CatsRuleDogsAreTards 1 year ago
I dont get it ._.
Pavilion755 1 year ago
they could make an amusement park ride out of that... complete with chunderbags...
Canadan20 1 year ago
Looks more like Loki's hammer.
SpazzyMcGee1337 1 year ago 22
its soooo trippppyy!!!
PowerHouseNet 1 year ago
IIII WAANNT ONE
rockoman100 1 year ago
paint it to look like the hammers from the wall... i would buy the crap out of it :P
draccanon 1 year ago 2
@draccanon That can be done! Go to my website to contact me by email and I will make arrangements to get them built and sent to you. Ken
kenkineticart 1 year ago
@kenkineticart do you deliver in holland? :P
FireflyIsland 7 months ago
@FireflyIsland I've delivered to Mexico and England, I'm sure I could deliver to Holland.
Ken
KenKinetic
kenkineticart 7 months ago
hypnotic. Thanks.
Vlad3000 1 year ago
Is this chaotic dynamic ?
yii1990 1 year ago
@yii1990 dynamic
rvbman47 1 year ago
In our technical college we built a box with magnets on the ground which let a spinner hover in the middle.
We spinned it by hand and then we closed the box and evacuated it
with a strong vacuum pump.
The spinner spins for 3 days til now ;-)
iLaseFMA 1 year ago
wooow that little is pretty cool lol
sabritas182 1 year ago
This has been flagged as spam show
Free Energy is real and its here but the coverup is strong, if u are interested in a REAL free energy magnet motor then
just go to LT-MAGNET-MOTORdotCOM and download the blueprints ,it is probably the ONLY working magnet
motor out there. Join the free energy revolution!!
cadentavaricegrtrj 1 year ago
Does it stop eventually?
kiemul136 1 year ago
@kiemul136
Yes it does. Its slowing is imperceptible as you watch it but in about ten or twelve minutes it will come to a stop.
kenkineticart 1 year ago
@kiemul136 It has to stop, as there can be no such thing as infinite power; everything needs a source of energy (but rocks :P)
Computergeew 1 year ago
I can see this kinetic art forever
rochelimit55555 1 year ago
This is so cool. I would really like to build one. I have some questions about it though.
It appears the main large hammer is balanced so that the peen stays down.
Are the rest of them balanced like that too? or just equal balance from pivot point?
acylon1 1 year ago
@acylon1 ...Only the sledge hammer is purposely off balance. All other hammers are balanced as closely as I can get them to neutral.
Ken
kenkineticart 1 year ago
I bet that took some time to balance up!!!
NigelLoller 1 year ago
Pretty cool, it reminds me of those zipper rides at the county fair.
deaftodd 1 year ago
nice :D
socue521 1 year ago
So epic I jizzed myself.
Great mind you've got there, bro.
lestersole 1 year ago
i love it
Dawid4Real 1 year ago
Thanks for your comment. This system of balanced hammers was fun to conceive, construct and show. It, along with my other kinetic scullptures have given me an opportunity to use art to teach the basic consepts of mechanical energy to the general public.
kenkineticart 1 year ago
very clever device!
lekunberriko1 1 year ago
awsome
Truesader 2 years ago
I've been working on something that can harness energy from this, but anything I do to it loses energy in friction or other resistance. Using a double pend. Tried a triple but it often drags the entire device to a halt when there are two opposing forces on an axis against gravity.
CalicoatMaker 2 years ago
My hammer system does appear to be perpetual motion but as with all mechanical systems, it is not.
It is operating with the initial energy that I put into it with a push just before starting the video.
I use precision bearings and hubs to minimize friction loss but over time the system will slow down.
Any attempt to harness this energy (remove it from the system to use elswhere) will quickly drain the initial energy and, as you found, drag the device to a halt.
kenkineticart 2 years ago 14
energy in equals energy out, don't be fooled into thinking that there is more energy in this device because of movement.
beaudjangles 2 years ago
there is not such thing as perpetual energy thermodynamics proves this
shadowman080 2 years ago
@shadowman080....We are all made of atoms with electrons spinning about them at great speed. I don't know how they got started spinning, and I don't know how to stop them, do you?
Techstuf 1 year ago
Is that a pendulum in your pocket, or are you just happy to ...
Oh wow, really nice pendulum. Great theme, nice color scheme, nice!
devjock 2 years ago
wow!!!
PaulNaoki 3 years ago
awesome!!
plamboline 3 years ago
Great work!
jstarret 3 years ago