Ciss air removal with printhead

[cityinkexpress]

if it uses HP cartridges with print head as long as the black clamps are on it will work

regards cityinkexpress

[abdullahsato4]

hp 4500

[cityinkexpress]

no it wont

regards shane

[len59356]

does it have a chance that the cartridge will overflow with ink??

[cityinkexpress]

Sorry but it needs the clamps to do this - if you put tape round them it may damage the heads, also if you leave in the printer it wont work as its not an airtight seal

shane

[rovaga76]

My HP60 cartridges are already installed in the printer.... what should I do? remove them and put some seal to the printhead (I don't have the clamps) or should I leave them on the printer and use the syringe on the plug??

Thanks!!!

[DrivenByNates]

Thank's a bunch, you save me a lot of time and effort with this guide, its a good thing people like you post guides like this the damn seller was asking me to buy new cartridge to fix then problem and bring it to his shop and he is gonna charge me 10 dollars for it

[blackjeffrey1]

Wont there still be some air left in the tubes?

[cityinkexpress]

it wont work whilst they are in the printer it must have the black clamps over the cartridges- and be totally sealed - if you keep doing it without the clamps it will just damage the travel plug on top

shane

[robmcelroy]

If I have them in the printer I only need to put in the plugs correct? I don;t need to put the tape or cover back on the cart.

I;m having so much trouble with my canon mp287.

Your video is very good.

[Fansuri85]

Thank you very much. This video is very helpful.

[spd770]

yo kiero uno



[spd770]

我在等待著您的答复，我希望你買散裝墨水施禮華我不擔心，因為我­有一個翻譯

[38CcCALPCcC38]

Das ist doch fürn lexmark oder?

[MrTommivercetti]

Thanks this is a very helpfull video, i am just about to install a ciss on a brand new catridge and wanted to know how to bleed it through. many thanks

[youth03]

i do hav the sharp needle. but i m afraid of leaving a hole in the travel plug. i notice it made from a different material from urs in the video.

[cityinkexpress]

you need small sharp syringe

[youth03]

heya. my ciss hav a rubber travel plug. it seems that i cant pierce thru those plug with the syringe needle to remove the bubble out. can u pls help me?? pls2....

[cityinkexpress]

sometimes it doesent - you can install now and it will be ok

regards

[cityinkexpress]

Because otherwise it will just draw air in - you need to create vacumn which cannot be done without a sealed environment

regards shane

[Spark190]

@cityinkexpress i tried it but the ink doesnt make it to the top!

[Spark190]

why does it needs to be on those black carts?