Homemade 33CC Gas/Motorized Bicycle

[sinned96]

We did this back in the 80's with a chainsaw motor

[sokaras7]

i have the same engine but my bicycle is 20''. it will go with the same speed than yours?

[nstable]

did you take care of that crack in the lower mtr mnt? funny, i had the exact same motor and it too entire lacked the pull start.

[30GB]

@nstable funny thing is the motor didn't crack, the scooters engine mounts did on the frame. This motor was very good and never had problems except the noisy horrid crank bearings, other than that it took beatings with out dying

[sleadhead1g]

where do your feet go????

[30GB]

@sleadhead1g when i made this video, i just finished it and i was excited to film it. I did weld a tube so that you can put your feet on.

[durchh7]

damn id jst drive tht mustang sitin right there in the drive way!!!:)

[hankeybillfred]

finally someone did it right, fuck friction drive.

[30GB]

@hankeybillfred friction drive is for idiots

[fairyheli2]

@30GB not necessarily, the advantages of friction I have found is that it can be removed very quickly, and can be disengaged easily, also, since only 1 bolt/stud is used to hold it, it holds up better legally as it isn't a motorcycle. because of it's simplicity it is easier to fix or remove when the engine goes wrong, and 2 stroke engines like this do quite often.

[fumachuma]

are u from elpaso TX????

[30GB]

@fumachuma toronto, ontario

[perry244]

defentally want to try this but ill get a chainsaw or something cheap at a yard sale this summer and try it

[novachevyguy]

you sound gay as fuck

[mlbirdinground]

thats illegal partner.

[MaraJadeZX]

@mlbirdinground Why is it illegal?

[mlbirdinground]

@MaraJadeZX it is illegal because it is no longer a bicycle. It is now a motorcycle and in need of licensing and shit. You cut the pedals off. I did the same thing on my first build. For it tio be legal it needss to be able to be completely human powered, with a motor assist. Otherwise its a motorcycle.

[daduke0327]

looks gay as shit

[noeltheshemale]

Not too shabby your bike. Doesn't look like it works, but it does. The buildings down the street, are those housing projects?

[subsystem8]

get front pegs. and to see if your speed meter is accurate just remember that walking speed is about 3 miles per hour

[30GB]

@subsystem8 i clocked it at 45km with a gps so it was freaking fast also i welded foot stands for it and traded it away for a lawn tractor but i sure miss it and at least i rode it like 200kms

[plavins1]

u should check out mine motorised bicycle made form russian 70cc 4.5hp chainsaw engine!!! video on my channel!!

[CHUCKYCHOPSTIK]

You can use a bicycle rear derailuer for a tensioner with some small modifications to it.

[Williamdavidgarrett]

I like your idea and The originality of it! But it really looks unsafe.. You kinda just welded everything together seems like.. It's going to look bad for all motorized bicycles.. I think you would have been better of just buying a kit..

[30GB]

@Williamdavidgarrett i think you dont get what homemade means, anyways it was made within 10 hours so that is amazing for Only using stuff i had laying around also i did buy a bike engine kit but the clutch took a shit after 1500km i put on it.

[ibuiltmineo1oo]

Good job on the ingenuity! I hope you are in a place where you have the oportunity to use your skill.

[Noahgyde]

What gas to oil mix do you use

[9inchrelief]

I have a 31cc 4 stroke Honda weed eater. How fast does urs go so I can ball park the speed of mine??

[30GB]

@9inchrelief its fucking fast as hell like 50km with a skinny guy on it

[plavins1]

@30GB your bike is very good!!! mine goes easely over 55kmh. mine has more powerful engine though

[oUNFOUNDLEGENDo]

So....where do your feet go when your riding it...?

[excalebuir]

@oUNFOUNDLEGENDo he stores them on his backpack

[mrkoshtip]

and i got cutting blades .... o wow lol good way to cut ur shit up ....hope ur safe dude

ps: WATCH UR NUTS!

[5372john]

do you think a 22cc 6 geared bike would work

[theboarman]

cxan i buys?

[woodstockslim]

you could get a front freewheel and install your pedals back on.

[donyboy73]

good job man!

[PorkChop2D]

so wear do you put your feet

[moresaws]

Could you hold the camera still please????

[AndreaGanora]

well done : )

[OblivionBurnProZ13]

Does this have a Centrifugal clutch on it? jw and nice job btw 5/5

[30GB]

@OblivionBurnProZ13 yes it dose

[konman2345]

I'm making something like this with an old electric razor chopper and a 36cc chainsaw engine

Btw,did you get that sprocket and chain from a razor chopper cuz it looks the same as on one?

You should change the gear ratio it will go WAY faster.

[DVMsucks]

wow...you worked a full day...amazing...

[mastax1234]

looks nice man, hope you dont break your wrist on one like i did, so please take this advice and wear wrist guards and a helmet,

[ils360]

that chain is to tite on the wheel

[30GB]

@ils360 it was tight but when riding bit more it loosen up so its perfect now

[sk4t3rslife]

where u put ur foot the engine is gunna burn ur foot oh yea put pegs on front tire then put your foot there

[chrilla1980]

lmfao if it ain´t done the redneck way so tellme.....that looks awesome bud ;)

[pimpinpenz]

oh damn there ya go.

[anthacdc]

nice job, seems to go good

[DannysCam]

are you sure you did not buy that at target? joking nice man reminds me of mine but i had the engine at my nuts and it was a bad idea

[30GB]

@DannysCam LOL this one sucks too because i have like no place to put your legs but oh well at least it works great for short distances also need a pull start to make it complete

[spitzification14]

@30GB why dont you use two bmx pegs on the back axle for your feet

[30GB]

@spitzification14 yeah if i can find some ill put them on

[6013welder]

@30GB where and how did you put that speedometer on