That tripod is USELESS! I made a similar rig for my bike and when I went on a bump the plastic tripod bolt broke and is now stuck in my camera. Stupid dollar store.
@ThatBum42 I think it is fine. The video you are seing is at accelerated speed. I think at normal speeds it vibrates much slower and is not easyly detected by the eye, what do you think?
I made one but it makes the camcorder shake. Makes the vids nearly impossible to watch. I even put one sided stick rubber foam under the camera and still didnt help.
A much better way would be to use solar panel mounts and clips and there's no drilling or problems with mount as they are completely adjustable to any size and therefore much better since you could put it in any car in any direction anywhere you have a mountable area.
Thanks for the awesome idea man! I actually just used this today for an in car video, check it out in my channel! Its the latest video about going to a new NCIX store and the car ride there.
Thanks for mentioning Tripshot. You can buy it from AziMotion directly or from Amazon. It's an option for in-car camcorder mounting that doesn't use suction cups or require headrest mounts. It is secured by a seat belt and lets you mount a tripod/camcorder. See more videos at the mytripshots YouTube group.
Reading the comments - check out Tripshot by a company called AziMotion. This may be an option for you (also has video of footage on curvy roads). Good luck!
Cool, simple camera mount-I like it. I also made a couple of car camera mounts for the dash-board & the license plate (even posted a "how-to" video on YouTube about it), but I may have to build my own version of your rig for more versatility in shooting from a vehicle.
For the life of me I cannot find a tripod like that anywhere. I went to at least 10- 1$ stores and nothing. I guess they don't sell it in Seattle, WA..
@punkrboi haha same i need mine for all my hig speed runs haha mates holding the camera is ok but wud rather it just me in the car... camcorder mount = weight reduction = faster = win :)
After watch your video. I modified a 54" cheapo tripod that I no longer use. Cut out the 3 legs and re-configured the head. I can silde in and out then locked. Work out great for me.
probably uses the eyebolts so the mount is tightly held in place, although lowering the head rests would do the same thing. However some headrests are not easily removed.
na, he just went out of his way to mount it like that when he could had just drilled holes and slid the headrest over...and it wouldn't look so ghetto, lol
but the hearest would move as the weight of the camera at the end of the boom would leverage it up and ruin the shot, also not everyones headrest comes out.
You could use a GPS mount from a high sell retailer and mount a home made hood to the camera lens from a gun shop for a rifle scope if they make them that small to help cut sun glare.
I want to build one, but I don't have $15 (no joke, I got $10 cash I found in the parking lot, and $4 in my debit account. That's why you don't move out of the house to go to college kids!) I may have some stuff lying around though.
thumps up if he drives hella crazy
MrViking10000 1 month ago in playlist Weekend Projects by Kipkay
or your could just duck tape it to ur head
spartan7126 2 months ago in playlist Weekend Projects by Kipkay
mmmm what about an arduino and a couple of servos to move it controlled by some pushbuttons on the wheel ?
xevilstar 3 months ago in playlist JAPANESE INVENTIONS
at 2:25 i though he drives that fast
5boben 4 months ago
i bet his car has got hidden machine guns....
ifba100 4 months ago
thumbs up for gopro
unboxingIKrave 4 months ago
i want 3-in1 basket ball toy
yeoj35368 4 months ago
im going to use this for my SCV(Storm Chase Vehicle)
StormChaserChris 4 months ago
heej at 2:39 a see my parants car.
no i'm kidding
Mrviccietor 6 months ago in playlist weekend projects
Try putting that in an airplane seat headrest LOL you could get some nice footage XD
vftdhys 7 months ago
dollar tree has the mini tripod sometimes. today they have laptop stands.
poiiihy 7 months ago in playlist Weekend Projects by Kipkay
Step 1: Steal cop car
Step 2: TROLL FACE!
FerroDiDestra 7 months ago 23
This has been flagged as spam show
thumbs up if your reading this comment during an ad.
zdmiller13 8 months ago
i dont belive kip kay can drive that fast!
guacantikloo 8 months ago
@guacantikloo lol its fast forwarded
iMentox 5 months ago
can i connect it to both seats?
1:06
oreskec 9 months ago
That tripod is USELESS! I made a similar rig for my bike and when I went on a bump the plastic tripod bolt broke and is now stuck in my camera. Stupid dollar store.
IndyColts1885 9 months ago
$15 in parts. Hundreds of dollars in tools.
OIIIIIIO99TJ 9 months ago 2
Love it
aaad917 9 months ago
only kipkay would put the bar on the front of the headrest.
firebug0001 9 months ago
Acura!
Dillon1791 9 months ago
why does your car have no licence plate?
ernshengjoel 11 months ago 2
@ernshengjoel he may take it off so no one on youtube can see his license plate #
TheSLSAMG 11 months ago
WHERE DOES HE KEEP ALL THIS STUFF!!!
rosar0980 11 months ago
Hm, it shakes too much. It would be good to devise some kind of stabilizing system to isolate the car's vibrations from the camera.
ThatBum42 11 months ago
@ThatBum42 I think it is fine. The video you are seing is at accelerated speed. I think at normal speeds it vibrates much slower and is not easyly detected by the eye, what do you think?
valflyinf 10 months ago
You could probably get some folding parts (Hinges, etc..) and have another rod come off of the first making it work as to record the driver
narc141414 1 year ago
I made one but it makes the camcorder shake. Makes the vids nearly impossible to watch. I even put one sided stick rubber foam under the camera and still didnt help.
NightTurkey82 1 year ago
This has been flagged as spam show
that was a pretty good idea
Marineinftry 1 year ago
uhh....kipkay.....u was speeding xp
asianmanaustin 1 year ago
Whoa-ho-ho I hope he can film himself getting a speeding ticket at 2:25.
Firedan1176 1 year ago 2
i have question. could you turn the tripod mount 180 degrees and make a back seat cam so u could video tape the back seat people?
dnettles1996 1 year ago
@dnettles1996
It just screws on the top, turn it. Says at 2:30
SurleyBlaine 1 year ago
its like he got caught by the police and for got to turn it off
howtodothinds 1 year ago
just bought the parts, just waiting on the tripod from ebay. cant wait to build this.
Howtoanything 1 year ago
You could just drill two holes and put the head rest through the holes so you don't have to make a bracket
jchan3123 1 year ago
0:21 thats what she said
BTvisuals 1 year ago
is your car from acura
mepwnyou012 1 year ago
@mepwnyou012 you don't see the acura sign on the car!!!
DjTrixx100 1 year ago
@DjTrixx100 stop at 0:02
mepwnyou012 1 year ago
This has been flagged as spam show
@mepwnyou012 ok den so why you said is your car from acura? if you see it there
DjTrixx100 1 year ago
that will scratch my head rest. Best to put some rubber where they meet
silverpizza100 1 year ago
kipkay!? TEH F0CK?!
1stBONER 1 year ago
its called having someone else in the car holding a camcorder
crafty25936 1 year ago 2
A much better way would be to use solar panel mounts and clips and there's no drilling or problems with mount as they are completely adjustable to any size and therefore much better since you could put it in any car in any direction anywhere you have a mountable area.
helloman1976 1 year ago
HACKER!
12345dogs54321 1 year ago
No speeding please, thanks.
chickenpoper 1 year ago
kipkay speeds look how many people he passed.
pieman12345678987654 1 year ago
I'd just tape that fuckin cam to my car... lol, wtf, how fast is he drivin? xD
Akantrex 1 year ago
This has been flagged as spam show
Thanks for the awesome idea man! I actually just used this today for an in car video, check it out in my channel! Its the latest video about going to a new NCIX store and the car ride there.
TheTechSource1 1 year ago
thumbs up if you think he is a good driver hahaaa
ducttapedude03 1 year ago
sy382 is getting horney of tripods
1HarRan1 1 year ago
@1HarRan1
And?
darkseed1010 1 year ago
Easier idea, velcro on the dashboard or elastic band on the headrest!
urbex2007 1 year ago
the cam corder hold maybe 15 dollars but the cam corder is 300 dollars
gord162 1 year ago
@gord162 or 1000 dollars
bouchandre 1 year ago
@gord162 they sell decent camcorders for about $100 and its hd ... i own one
brian9827 1 year ago
or u culd tape it down, with alot of tape
Halo3worldatGTA 1 year ago
@Halo3worldatGTA then u would ruin the camcorder ... and how would u get the memory card out if it is on the bottom
brian9827 1 year ago
@brian9827 rip the tape of lol
Halo3worldatGTA 1 year ago
F5 = skip advertisement.
planes472 1 year ago
@rampersaud97 its a fast motion idiot
alissabandaly 1 year ago
wing nuts!
danielcarmi305 1 year ago
That was the cutest little tri-pod I have ever seen.
sy382 1 year ago
or just grap a crap load of duct tape, and tape it to the dashboard, haha :P
RJHaid 1 year ago 18
Kipkay: Tune into next week's video, I am going to show you how to end world hunger, less than $10.00.
nikecheck2009 1 year ago 3
your a pretty fast driver kip
airplanejack 1 year ago
Jeez, kipkay! You drive fast!
TheRandomflames 1 year ago
@TheRandomflames it is a fast motion idiot
alissabandaly 1 year ago
Just gimme a flipcam and 2 rolls of duct-tape XD
denniswarcrafter1 1 year ago
Dollar store?! Fuck, I bought one at a camera store for 15 freakin' bucks!
zanuha 1 year ago
lol 147 is my bus number
mama1234554321 1 year ago
I always wanted to see how much lice I have!
=D
snozer2 1 year ago
back seat banging
pinchiecajones 1 year ago
This comment has received too many negative votes show
i am not sure if my dad wil be happy if i do that with his lamborghini....
metallicaloverfan 2 years ago
hehe back seat banging
pinchiecajones 2 years ago
Thanks for mentioning Tripshot. You can buy it from AziMotion directly or from Amazon. It's an option for in-car camcorder mounting that doesn't use suction cups or require headrest mounts. It is secured by a seat belt and lets you mount a tripod/camcorder. See more videos at the mytripshots YouTube group.
TRIPSHOTvids 2 years ago
Reading the comments - check out Tripshot by a company called AziMotion. This may be an option for you (also has video of footage on curvy roads). Good luck!
dadonred 2 years ago
well i cant do that in my RSX D: it doesn't have those kind of seats ...
vicente321 2 years ago
looks simple, but you need to find all that stuff :S. The 1 buck tripod looks easy to find but its not.....
kevinr9111 2 years ago
Cool, simple camera mount-I like it. I also made a couple of car camera mounts for the dash-board & the license plate (even posted a "how-to" video on YouTube about it), but I may have to build my own version of your rig for more versatility in shooting from a vehicle.
MHN91 2 years ago
naw, drivin in the canyons... its hard to stay still on hard turns
punkrboi 2 years ago
nice 3.2 TL
poojacrew 2 years ago
Just hope you never get into an accident, that brace could cause serious neck, spine problems.
Not sure you would be covered by your insurance, because of that mod.
If in an accident, the police could charge you for undue care while driving, -all they have to do is check the video seconds before the crash.
I'm just saying- it's a fine idea you have there, I would just research the "Worst Case Scenarios" first before employing this.
upallhours9 2 years ago
For the life of me I cannot find a tripod like that anywhere. I went to at least 10- 1$ stores and nothing. I guess they don't sell it in Seattle, WA..
Can anyone recommend an alternative ???
AlexielxRage 2 years ago
This comment has received too many negative votes show
dude you must be going at least 70MPH !
dallin7788s 2 years ago
it was just on Fast Forward
iCabSC 2 years ago
how do i make a car camera mount on the rear veiw mirror? thanks
thepittpa 2 years ago
thank you guys i needed this gadget to film my canyon runs cuz my friend holding it just wasnt cuttin it
punkrboi 2 years ago 42
@punkrboi haha same i need mine for all my hig speed runs haha mates holding the camera is ok but wud rather it just me in the car... camcorder mount = weight reduction = faster = win :)
SprntrlDeathNinja 10 months ago
I never made one,my bhoy holds the camcorder for me.
felixcock 2 years ago
this one is much better than mine...
Nice Acura though. heh
justinaurelius 2 years ago
Nice! Although I don't have a car... (I tried this on my mom's car, XD!)
thelambofan 2 years ago
Thats cool, but how would you design it so the vibrations of the car wouldn't shake the camera? Those gyro things?
deerfish3000 2 years ago
I'd like to put one of these on my driver side near the door, pointed out the window for when I get pulled over.
xxjohnhoukxx 2 years ago 47
@xxjohnhoukxx I dont get it,
iDefcon6 4 months ago in playlist Weekend Projects by Kipkay
2:30 is that I-75 in Florida? I swear I recognize that bus at 2:36
xxjohnhoukxx 2 years ago
After watch your video. I modified a 54" cheapo tripod that I no longer use. Cut out the 3 legs and re-configured the head. I can silde in and out then locked. Work out great for me.
BrucePhung 2 years ago
i had same exact tripod they suck
shaw9825 2 years ago
I get the same exact tripod at "Dollar Tree"
BandM555 2 years ago
ii did that and turned back wards and plugged in to the tv vhs dvd palyer in my car and i can see all around me when driving
saxmannanaimo 2 years ago
y
lol
mlav85 2 years ago
lol he calls this easy
nfsgtamc3 2 years ago
that is easy r u retarded or somethin
royce2394 2 years ago 2
Why don't you just drill holes in the aluminum and slide the head rest through?
canammx1 2 years ago
Because not all cars have detachable head rests
JackS191 2 years ago 3
yea or get pair of cellphone hands for the dash board and set it on those like i do...
stroodling2 2 years ago
that's pretty cool, now i can pretend to be a stupid american cop show!
zerocks88 2 years ago
This comment has received too many negative votes show
foreign fag
royce2394 2 years ago
THIS IS COOL
dinesjoe 2 years ago
don't that hurt your head
sspongbob 2 years ago
u shouldn't do this someone may want to break into ur car
thevideoman9 2 years ago
were u speeding?
yugix5 2 years ago
dude its a highway
thevideoman9 2 years ago
even if its a highway thats way too fast
yugix5 2 years ago
hey i don't go to highways a lot with my parents
thevideoman9 2 years ago
well plz do b4 u start judging others
yugix5 2 years ago
ok sorry for that
thevideoman9 2 years ago
really? wow.. he just sped up the video and then did a voice over..
mustarsic 2 years ago
he does often speed things up
thevideoman9 2 years ago
He sped the video up...
OnsotineFilms 2 years ago
were u speeding?
DragonBlader360 2 years ago
Ur a fast driver! ;s
AudunBarsk 2 years ago
This has been flagged as spam show
º¤ø„¸¸„ø¤º°¨¸„ø¤º°¨ post to 9? other vids
¨°º¤ø„¸ Copy „ø¤º°¨ press F5 twice
¸„ø¤º°¨Paste ``°º¤ø„¸ OK
¸„ø¤º°¨¸„ø¤º°¨¨°º look at ur background
ZCGleader 2 years ago
This has been flagged as spam show
This really works i tried it 1. Cover your mouth with your hand
2. Make a wish into it.
3.Close your hand (make it into a fist)
4. Hold you hand(the fist) to your heart for 5 seconds.
5.Send this to 3 more videos.
6. Tommorow will be the best day of your life
x3checkedHEADx3 2 years ago
how about one for those of us that don`t have head rests on our seats?
4x4Mudmaster 2 years ago
Then you're screwed...?
fsxescort 2 years ago 5
then i guess i will have to make one that bolts to the trim screws in y old pickups.
4x4Mudmaster 2 years ago
none of my trucks have headrests.
4x4Mudmaster 2 years ago
Genius! Thanks!
DizzyDougTV 2 years ago
yeah fuck bob stop it leave us youtubers alone
CROSSFIRE145 2 years ago
look good but it needs some kinda stabiliser.
NeilFerdowsian 2 years ago
i have that mini tripod:)
stephbule 2 years ago
This has been flagged as spam show
☻/
/▌
/ \
THIS IS BOB
COPY and PASTE bob and he will soon take over youtube
pimpnrob 2 years ago
fuck bob
hotwheel4live 2 years ago 2
Cool, something that's perfect for Davesfarm and his cars!!! :D
twocvbloke 2 years ago 2
yeah!!
Stere0123 2 years ago
i would just drill holes in the aluminium, so the headrest held the bar in place, insted of the eyebolts
MoreBoomThanZoom 2 years ago
probably uses the eyebolts so the mount is tightly held in place, although lowering the head rests would do the same thing. However some headrests are not easily removed.
iantheone 2 years ago
Great video, i am definately going to be doing this.
DSMking90 2 years ago
Where can you get that mini tripod in the UK?
MotionScapeClan 3 years ago
poundland
lime61 2 years ago
Probably at a hardware or electronics store.
MetallicAuptuned 2 years ago
you might not get one that chep in the uk, but i bought one off amazon for a fiver, to my door.
Nakednessdave 2 years ago
PoundLand! Everything is a pound!
nipperoid 2 years ago
This comment has received too many negative votes show
why use those ugly ass u bolts?
killbillet420 3 years ago
oh fuckin hell youre a hard man to please arent u!
C9ESH 3 years ago 5
na, he just went out of his way to mount it like that when he could had just drilled holes and slid the headrest over...and it wouldn't look so ghetto, lol
killbillet420 3 years ago
you wouldnt be able to tighten it and it would rattle as a result
C9ESH 3 years ago
not with the headrest slid down tight on it
killbillet420 3 years ago
but the hearest would move as the weight of the camera at the end of the boom would leverage it up and ruin the shot, also not everyones headrest comes out.
5in1killa 2 years ago
why didnt he just drill holes in it to put the headrest through
killbillet420 3 years ago
awsomw!!!
estherlidia28 3 years ago
dang its looked like u were speeding
kakashi1356 3 years ago 3
he was speeding the video !!!!!!
estherlidia28 3 years ago
but with the talking it was like he was speeding xD
takanaka2 3 years ago
You drive really fast! ;)
funnyent 3 years ago 3
lol i bought that exact tripod at a dollar store. sucky tripod, but what the heck, its a dollar
abekipnis 3 years ago 3
This comment has received too many negative votes show
kipkay watches NASCAR? wow i didn't peg him as a redneck lol
sulaimann 3 years ago
why did he only mount it to 1 headrest why not across both
DriftWoodProductions 3 years ago
You could use both, for more stability.
TheChubbyKid 3 years ago
You could use a GPS mount from a high sell retailer and mount a home made hood to the camera lens from a gun shop for a rifle scope if they make them that small to help cut sun glare.
PhantomMaster101 3 years ago 2
I just used some ducktape and stick it on the dashboard behind the windscreen
GTASADUDE 3 years ago 3
lol
demon824 3 years ago
windshield. it doesnt screen the wind moron
88RedRyder88 2 years ago
omg kipkay, you drive too fast!!!
KrazyKuul111 3 years ago 2
hey u could put that on ur rear bumper and put a small lcd tv or monitor and hook it all up to use it as a backing device
coolbmxer47 3 years ago
i have the same dollar store tripod
haha
TylerTR4G3DY 3 years ago
nice, but i dont have a saw, or drill haha
e30roundel 3 years ago
cool i made one! but mine is just a piece of string that is tied to the roof and camera
varun009 3 years ago 2
hahahaha
thats gonna bounce around every where
lol
NaruFreak94 3 years ago
yeah
varun009 3 years ago
I want to build one, but I don't have $15 (no joke, I got $10 cash I found in the parking lot, and $4 in my debit account. That's why you don't move out of the house to go to college kids!) I may have some stuff lying around though.
redhotcustoms 3 years ago
that sucks redhotcustoms...really tho that sucks
XxhilfmirxX 3 years ago
Luckily since posting that I got $25 for mowing my uncle's lawn. Not much, but it's $25 more than what I had.
redhotcustoms 3 years ago