Shielded cable is video, shield to outside and center conductor to center pin.
DC power is a pair of unshielded wires, trace to the board or power up the original device and read the B+, should be whatever battery voltage is with the other being negative.
There may be other wires such as a tally light to indicate record, ignore that, just 4 wires get connected.
Would be nice to see how the connections were made because I have the same viewfinder, but can't make it work, and the web site doesn't explain much more than the video :/
what a waste of time you nutter....... yh ur right the vid is about nightvision not music !! so why the fuck are u playing this shit music u camera humping hippy...
@dergangedchipmunk if ur gonna complain bout sumfin get ur fuckin facts right instead of makin urself look like a prick!! this aint emo music, its more american/skater punk!!!
Dumb??? NUB??? I made a coment that the marbs in you video are lights with tan filters, and not white filters, open your eyes pay attention and understand what you read, it's idiots like you that make me think that your parents shouldn't have been in the back seat....
i think there is an even esier way >>>sotter a bunch of IR Leds in series and attach the to your camcorder. you even dont need to demolish the camcorder..(sorry about my english)
your led's are to focused try to "share the love" a little bit eh?anything you look at is to much brighter than anything around itim not sure how though...
Nice work ! I'm actually working on something similar. Do you think that the original system of the camera can be used, instead of buying some security camera ? My project is to make some nightvision scope device, and the optical motorized zoom can be really interesting !
sorry but it is not easy to explain with little words. to unite the wires is easy. the problem is find the pin "+ vcc" "gnd" "signal" of the viewfinder. bye
Cool
rupertone2 2 months ago
nice workkkk!!!!!!
ronald3729 4 months ago
Viewfinder wiring.
Shielded cable is video, shield to outside and center conductor to center pin.
DC power is a pair of unshielded wires, trace to the board or power up the original device and read the B+, should be whatever battery voltage is with the other being negative.
There may be other wires such as a tally light to indicate record, ignore that, just 4 wires get connected.
Arabhacks 7 months ago
Would be nice to see how the connections were made because I have the same viewfinder, but can't make it work, and the web site doesn't explain much more than the video :/
Iteban 10 months ago
@Iteban I do not have the time to create a better article on the website, sorry
Telecastersim 10 months ago
what a waste of time you nutter....... yh ur right the vid is about nightvision not music !! so why the fuck are u playing this shit music u camera humping hippy...
mrrabbiteye 10 months ago
Loved it!! Im building one thats almost the same. Good job!
jrwoo3 1 year ago
i don't give a damn what anyone says. offspring rocks!!!
mercesletifer2509 1 year ago
how far can you use that and still make out what you're lookin at??
SKUMMASBAGGUS 1 year ago
DUDE!!! I HAD THE SAME VIEWFINDER AS U BUT I CANT USE IT TELL ME WICH WIRE do what please!!! (there is 4 black wire and 1 brow) isnt that??
alabank 1 year ago
NICE DUDE!!!!!
XmodGT1 1 year ago
i have all the shit to make this just cant figure out how to conect it all together anyone wana help my ass
Forbidenangel0 1 year ago
this is about nightvision not the song playing go on a song video and comment about it not here
luther303 1 year ago 6
FUKIN EMO MUSIC BULLSHIT
dergangedchipmunk 1 year ago
@dergangedchipmunk if ur gonna complain bout sumfin get ur fuckin facts right instead of makin urself look like a prick!! this aint emo music, its more american/skater punk!!!
SKUMMASBAGGUS 1 year ago
kick-ass song
WidowMaker9669 1 year ago
me... only about 30 seconds
magiceraser9 1 year ago
just a quick question why is the display green? I've always wondered this.
onlyadot 1 year ago
i cant seem to figure out what wires go were can anyone help me out
Forbidenangel0 1 year ago
music was awful ,I could only watch the first min.
bash186 1 year ago
could mute the sound
Telecastersim 1 year ago 3
@Telecastersim is its range about 20 meters?
Digadogup 1 year ago
@bash186 U have no taste in music at all, offspring are one of the best bands in the world
lycanwolf2 1 year ago
@bash186 OMG the music is the best one out of all the vids ive seen on this subject...
biro753 1 year ago
@bash186 great song!
Tarzan07330 1 year ago
what crap music
globenavigator 1 year ago
wow, you fail miserably. offspring is fuckin' awesome. go kill yourself.
xxero521 1 year ago
nobody will remember this crap in 20 years time...
globenavigator 1 year ago
Lol, the band has been around 26 years already and I still listen to them occassionally. So I doubt that ;)
xxero521 1 year ago
Cool, so you r the only one to enjoy it from what I read from other posts... :)
globenavigator 1 year ago
I know tons of people that like The Offspring. And they have no room to speak from the music I heard on their profile, lol.
xxero521 1 year ago
Like bash186.. here's the music on his video.
/watch?v=PMpgeFoYbBI
rofl
xxero521 1 year ago
how do you know how much power to give the view finder?
height198cm 2 years ago
By knowing what battery your cam was using befour you remove the viewfinder.
7Gkar7 2 years ago
Marlboro lights have white filters not tan...
killbilly069 2 years ago
are ya dumb? i have marbs right now, you nub. O.o you smoking shitty lights?
ZronZ 2 years ago
Dumb??? NUB??? I made a coment that the marbs in you video are lights with tan filters, and not white filters, open your eyes pay attention and understand what you read, it's idiots like you that make me think that your parents shouldn't have been in the back seat....
killbilly069 2 years ago
lol...coffee and smokes....gotta have them while fucking around...
stripes5150 2 years ago
wow, marlboro lights, ur cool, smoke lucky strikes
XxX69forlifeXxX 2 years ago
This comment has received too many negative votes show
Fking gay music.. MUTED!!!!!!!!!! SOB
16XDVDLaserDiode 2 years ago
@16XDVDLaserDiode
Lol, you're the one to talk. The song on your video is fucking HORRIBLE. Sounds like the guy is fucking constapated. You have baaaad taste in music.
xxero521 1 year ago
Could anyone give me the details on the camera he is using?
or atleast recomend a camera that is avalable and not too difficult to take the viewfinder from?
thanks in advance
Nopp3 2 years ago
For the masses: All electronic camera's can see/record IR, they're just filtered out.
The advantage of what you've done is the included IR Lighting in the security camera.
Ebay has IR lights for really cheap and any camera you want to dismantle to remove the filter(which looks like a clear lens) will work
eyegoldeneye 2 years ago
that IR filter looks like a bit of glass, with a really slight blue tint to it when you look through it
OGMO11 2 years ago
can someone tell me what is the name of the song
jawad00003 2 years ago
I like that shot at 0:15. Those are always on my list of tools as well.
surfmcgoogler 2 years ago
WHATS THE MUSICK THEME ??? IRS SUPER :)
sniegol445 2 years ago
the kids aren't alright - offspring
Nopp3 2 years ago
every camera has an ir filter thats why the ir diode light was so weak ont the film if you tok it of the efect would have been much better
sniegol445 2 years ago
that's the quality of the mw2 goggles btw
italyalex 2 years ago
lol your teeth and fingers are probly as brown as mine :P.fucking tea and smokes is all i have all day...
ninja6kid 2 years ago
it's cool, but it spend a lot of energy
davidtheguitarman 2 years ago
i think there is an even esier way >>>sotter a bunch of IR Leds in series and attach the to your camcorder. you even dont need to demolish the camcorder..(sorry about my english)
plavins1 2 years ago
well as far as i know not all cameras can see IR eather
so an ir camera is the sure way to go, about 6dollars on ebay
Nopp3 2 years ago
could u make 1 4 me i will buy if
4d9er1 2 years ago
Comment removed
davee232 2 years ago
just become a ninja. they can see in the dark!
sidexwalk 2 years ago
Can i make one and use it for my 3.2mp cell phone that does not have night shot at all but it will still look like a night vison camera on the screen
dnomsed5 2 years ago
I belive so yes, as any camera has the ability to pick up IR light.
cracktober 2 years ago
Cool! Only it could be a bit expensive! :)
What is song's name?
lilmb94 2 years ago
Offspring - The Kids Arent Alright
Telecastersim 2 years ago
@Telecastersim nah ,ts a good song
MrGolfTee 1 year ago 2
Found it already
lilmb94 2 years ago
your led's are to focused try to "share the love" a little bit eh?anything you look at is to much brighter than anything around itim not sure how though...
gun4877 3 years ago
Just buy some wide angle LED's.
lilmb94 2 years ago
not sure about the marlboro wouldn't keep me awake good old golden virginia!could i use an old digital camera?
ballores 3 years ago
Very, very cool - look similar to my project.
However the illumination in your system looks much better than in mine (I use 6 LEDs only with 3° angle of beam only)
Cheers,
Matthias
schizoembollo 3 years ago
How Easy Is It To Wire The Viewfinder To The CCTV Camera?
TPSproductionz 3 years ago
Thats about 200 bucks in lipo packs. Right?
VicAzcro 3 years ago
lipo pack = 20Euro
Telecastersim 3 years ago
Nice work ! I'm actually working on something similar. Do you think that the original system of the camera can be used, instead of buying some security camera ? My project is to make some nightvision scope device, and the optical motorized zoom can be really interesting !
Gman1664 3 years ago
to use the security camera been more easy because had the ir led . is able however to use a camera without ir filter . bye
Telecastersim 3 years ago
grandeeeeeee cmq cm ti ho detto prima 6 un folle XD
tornadoalex89 3 years ago
Nice one with the coffee and cigarettes.
worldofthablind 3 years ago
Cool! How did you plug the cords between the ir-camera, switch, battery and the viewfinder?
KojoottiHra 3 years ago
sorry but it is not easy to explain with little words. to unite the wires is easy. the problem is find the pin "+ vcc" "gnd" "signal" of the viewfinder. bye
Telecastersim 3 years ago
gnd is easy to find, the cabel is usaly wiered to the viewfinders tube body
davee232 2 years ago
Incredibile....funzioda davvero!!!
Ma chi sei...una spia russa? ;)
Complimenti!
fabriziopuork 3 years ago