@OnusofStrife Stock manifolds, stock Y pipe into the gutted cat, 3" pipe from cat to a Flowmaster, then dumps out a turned down elbow in front of the axle. The flowmaster has 3.5" inlet and oulet .
@CKRworld Thanks a ton. I've been trying to figure out what to do with the exhaust for my 351w 91 f250 and this is the sound i'm looking for. Whats the underdrive pullies help with besides parasitic drag?
@CKRworld Thanks a ton. I like the sound of this just what i'm looking for my 91' f250 351w. What do the underdrive pullies help with other than power loss. Flowmaster 40? super 44?
@OnusofStrife Not sure on the flowmaster, I got it from a friend. Pulleys are lighter and they slow down the accessories for increased HP and torque.... And they look cool :)
@CKRworld Okay thanks. Well its one of those i can imagine lol. I'll just pick and hope for the best. I want to chuck the extra accessories on mine. Damn air pump and idler for the ac. The brackets take up so much room. But intill i'm done with emissions in 3 years i'm sol. Right now i need and exhaust to get it to pass emissions lol.
@patriot91101rip I would say if your parked and playing your sound system it may kill your battery. The underdrive kits come with the alternator, water pump and crank pulley. What i was told was if you have a problem with charging use the stock pulley. If you have a cooling problem use the stock pulley. I have the stock pulley on my ALT and at an idle It is barely charging.
nice vid, Bronco sounds strong. How did you mount your camera?, I'm always trying to record while steering and shifting, and need to find a good mount
what state is this in?
17nags17 1 month ago
@17nags17 Michigan
CKRworld 1 month ago
What exhaust do you have on this?
OnusofStrife 1 year ago
@OnusofStrife Stock manifolds, stock Y pipe into the gutted cat, 3" pipe from cat to a Flowmaster, then dumps out a turned down elbow in front of the axle. The flowmaster has 3.5" inlet and oulet .
CKRworld 1 year ago
@OnusofStrife Its also the stock 351W with Aluminum underdrive pulleys on the crank and water pump.
CKRworld 1 year ago
@CKRworld Thanks a ton. I've been trying to figure out what to do with the exhaust for my 351w 91 f250 and this is the sound i'm looking for. Whats the underdrive pullies help with besides parasitic drag?
OnusofStrife 1 year ago
@CKRworld Thanks a ton. I like the sound of this just what i'm looking for my 91' f250 351w. What do the underdrive pullies help with other than power loss. Flowmaster 40? super 44?
OnusofStrife 1 year ago
@OnusofStrife Not sure on the flowmaster, I got it from a friend. Pulleys are lighter and they slow down the accessories for increased HP and torque.... And they look cool :)
CKRworld 1 year ago
@CKRworld Okay thanks. Well its one of those i can imagine lol. I'll just pick and hope for the best. I want to chuck the extra accessories on mine. Damn air pump and idler for the ac. The brackets take up so much room. But intill i'm done with emissions in 3 years i'm sol. Right now i need and exhaust to get it to pass emissions lol.
OnusofStrife 1 year ago
@CKRworld is there any down sides to running underdrive pulleys such if you have a sound system and such?
patriot91101rip 9 months ago
@patriot91101rip I would say if your parked and playing your sound system it may kill your battery. The underdrive kits come with the alternator, water pump and crank pulley. What i was told was if you have a problem with charging use the stock pulley. If you have a cooling problem use the stock pulley. I have the stock pulley on my ALT and at an idle It is barely charging.
CKRworld 9 months ago
@CKRworld Thanks for the info ill keep it in mind
patriot91101rip 9 months ago
I like the guy in the Samurai at the end.
DuneTV1 1 year ago
@DuneTV1 LOL I figured you would.
CKRworld 1 year ago
Thanks! I had the back seat out, so i used the rear seat mounts to tie down a tripod. then i just used the remote to start and stop the recording
CKRworld 1 year ago
nice vid, Bronco sounds strong. How did you mount your camera?, I'm always trying to record while steering and shifting, and need to find a good mount
cudabluesman 1 year ago