@HeyStupidFlanders Hey good to know you liked it. But I'm not selling it. I have gifted my controller to a friend of mine..Sorry. But I think with a little trouble and schematics you can try to make one for yourself. A good number of people have made their own controller after reading my tutorial.
Well the dimensions depends upon you. Still my dimensions were 12'' x 11'' and for the inclination the height is 1.5 '' on one side and 3'' on the other.
I have a fc100 controller from my old school roland gp8, how can I use it to control amplitude on my laptop? I mean how do you get midi to the laptop? Sorrry, im a newbie with this stuff, thanks if anyone can help.
I am making this project for VDj controller. My problem is I can not map the vr's to bahave like VR. What happen is the vr function behave like an UP and Down key. Any idea what went wrong with my project? Thanks
@pathakbidyut Thank you very much. I use rejoice and i solve my problem by setting the increment to 0, control change. My next problem is I don't have enough analog chanel for my project since i need 14 ch I only have 4 analog from my game controller. Thanks again
Well the guitar line input is connected directly LINE IN port (that goes to the input of your sound card.) and the LINE OUT port (that connects to the output of your sound card) is connected directly to the MASTER OUT port.
I want to do a project like yours, but I want to be able to extend the system if I need to. So I will have 2 expression pedal outputs (using 2 axis). My only doubt is how many "pedals" are good enough? I have 12 buttons available, should I use all of them?
This is what I want, could you send me the schematics? Thanks for the video. I'll send you a PM with my mail. A question, what are the line input/output for ? is it an audio interface as well?
Please check the video description and you wll find a link to the procedure. Line in/out is just my design. Line input of controller is connected to line input of your computer and line output of your computer is connected to line output of the controller which is again internally connected to master output of the controller. Theres a guitar in port too which is connected internally to the line input of the controller.
heyy what game pad exactly did u use ? just to make it eaiser to build i think i know whick type it is but are you able to just put a link in the reply to this to a site with one like yours on it thnx :)
If i understand right, basicaly there are linked gamepad to pc. But how you link buttons to sowtware and, how do you make guitar input so it is linked to pc?
Thinking about making one of these. Just a quick question maybe you tried this already. I was just going to pull apart a old pc steering wheel and foot pedals to do something similar. Good or bad idea? Awesome job on your project. The only reason I'm asking you is because you seem to have some know how in this area. Thanx for your time and Keep up the good work!!
Well i've seen a video on a similar kind of project, and the guy used those foot pedals as expression pedals. i dont understand where you are going to use the steering wheels in this project. I haven't tried it myself but the pedals should work. Give a try. All the best...
Hi, im very interested in making one of this for me, can you send me a step by step procedure or a more detailed tutorial? I read yout blog but im still have some doubts... Anything would be helpful! Thanks a lot!
EPIC HOMEMADE MIDI CONTROLLER IS EPIC !
FunnyLeech 1 day ago
All of the other questions and HOW MUCH.. you sell?.. whats up?
I have been drawing schematics and thnking of this for the last few years and this is really laid out well and nice!
Hit ME UP! Ill find more out if interested in chatting..! thanks
HeyStupidFlanders 2 months ago
@HeyStupidFlanders Hey good to know you liked it. But I'm not selling it. I have gifted my controller to a friend of mine..Sorry. But I think with a little trouble and schematics you can try to make one for yourself. A good number of people have made their own controller after reading my tutorial.
All the best
pathakbidyut 2 months ago
also, how will you output the sound?
jan007magic 5 months ago
@jan007magic The sound output is from your pc/ laptop via line out port or any usb interface...
pathakbidyut 5 months ago
do you have the schematic? and how do you hook up your guitar?
jan007magic 5 months ago
THANKS BRO, THAT'S COOL
lpunderground666 8 months ago
Hi, can you tell me the measures of the case? thanks
gourrygabriev 1 year ago
@gourrygabriev
Well the dimensions depends upon you. Still my dimensions were 12'' x 11'' and for the inclination the height is 1.5 '' on one side and 3'' on the other.
pathakbidyut 1 year ago
Hi, can you tell me what´s the measures of the case? thanks
gourrygabriev 1 year ago
Dude, how did u make the expression pedal??
2015coolguy 1 year ago
@2015coolguy Hi, please check the link to my blog to find the procedure on making the controller. The link can be found in the video description.
pathakbidyut 1 year ago
I have a fc100 controller from my old school roland gp8, how can I use it to control amplitude on my laptop? I mean how do you get midi to the laptop? Sorrry, im a newbie with this stuff, thanks if anyone can help.
sniffy45 1 year ago
which pot do you use for the pedal or which comes with him?thanks !!!
javmore77 1 year ago
@javmore77
Hi i have used the pots that came with the pedal...any thing within 10 -50 k pot will do.
Regards....
pathakbidyut 1 year ago
I am making this project for VDj controller. My problem is I can not map the vr's to bahave like VR. What happen is the vr function behave like an UP and Down key. Any idea what went wrong with my project? Thanks
gigabrid 1 year ago
@gigabrid
Hi you need to put on the analog function of the pots. Only then it will work as vr, and send cc messages while mapped.
pathakbidyut 1 year ago
@pathakbidyut Thank you very much. I use rejoice and i solve my problem by setting the increment to 0, control change. My next problem is I don't have enough analog chanel for my project since i need 14 ch I only have 4 analog from my game controller. Thanks again
gigabrid 1 year ago
WHERE DID YOU SOLDER THE GUITAR LINE INPUT, LINE OUT, ETC...
lpunderground666 1 year ago
@lpunderground666
Well the guitar line input is connected directly LINE IN port (that goes to the input of your sound card.) and the LINE OUT port (that connects to the output of your sound card) is connected directly to the MASTER OUT port.
pathakbidyut 1 year ago
@pathakbidyut
IS IT COMPATIBLE ON MY AMPLITUBE 3 SOFTWARE THAT I'M USING RIGHT NOW?
lpunderground666 11 months ago
@lpunderground666
Hi...ya this thing is compatible with amplitube 3...i'm using it for the same now....
pathakbidyut 11 months ago
I want to do a project like yours, but I want to be able to extend the system if I need to. So I will have 2 expression pedal outputs (using 2 axis). My only doubt is how many "pedals" are good enough? I have 12 buttons available, should I use all of them?
Do you have any tips on making the case?
zhouluyi 1 year ago
This is what I want, could you send me the schematics? Thanks for the video. I'll send you a PM with my mail. A question, what are the line input/output for ? is it an audio interface as well?
MaghoxFr 1 year ago
@MaghoxFr
Please check the video description and you wll find a link to the procedure. Line in/out is just my design. Line input of controller is connected to line input of your computer and line output of your computer is connected to line output of the controller which is again internally connected to master output of the controller. Theres a guitar in port too which is connected internally to the line input of the controller.
pathakbidyut 1 year ago
@pathakbidyut Thank you, I feel like an idiot for not looking at the info. I'll check it...right...now!
MaghoxFr 1 year ago
heyy what game pad exactly did u use ? just to make it eaiser to build i think i know whick type it is but are you able to just put a link in the reply to this to a site with one like yours on it thnx :)
Pyeboy101 1 year ago
grt work bro..keep it up!!
insomaniacveer123 1 year ago
If i understand right, basicaly there are linked gamepad to pc. But how you link buttons to sowtware and, how do you make guitar input so it is linked to pc?
PuppetGovernmentLV 1 year ago
@PuppetGovernmentLV with the software he mentions. check the info there's a step by step
MaghoxFr 1 year ago
congratulations amazing idea!
dennyworks 1 year ago
this footcontroller working in vamp 2??
adrian1983cump 2 years ago
well I dont know about vamp2 but it did work in amplitube....if vamp2 has midi learning options then i guess it should work.
pathakbidyut 2 years ago
Thinking about making one of these. Just a quick question maybe you tried this already. I was just going to pull apart a old pc steering wheel and foot pedals to do something similar. Good or bad idea? Awesome job on your project. The only reason I'm asking you is because you seem to have some know how in this area. Thanx for your time and Keep up the good work!!
MetalStatic 2 years ago
Well i've seen a video on a similar kind of project, and the guy used those foot pedals as expression pedals. i dont understand where you are going to use the steering wheels in this project. I haven't tried it myself but the pedals should work. Give a try. All the best...
pathakbidyut 1 year ago
Well I wouldn't use the wheel just the buttons from the wheel. Oh and kill the force feedback lol
MetalStatic 1 year ago
Hi, im very interested in making one of this for me, can you send me a step by step procedure or a more detailed tutorial? I read yout blog but im still have some doubts... Anything would be helpful! Thanks a lot!
brunoluan 2 years ago
hello sir can you send me a step by step procedure on how you made this. please.....thanks
zinitsi 2 years ago
plz send me your email id.....
pathakbidyut 2 years ago
man!! first time i just heard the music...now i saw the video...its amazing man...u made that urself!!!
riteshsoni123 2 years ago
awesum job man.....kip up d gr88 wrk!!!
dhimannitdgp 2 years ago