EK H30 Supreme HF 240 Advanced Liquid Cooling Kit - First Look

[inso77]

Hi Mike, thanks for the review. Been researching for my first water cooling set for my 600T case. Been looking at the EK brand for some time now but was wondering if this would work. Seems like it will, so I'm going to order a kit myself. Also, I saw your video on the clear panel for the 600T. I emailed mnpctech.com to see if they are still making them.

[DaveEnsor]

Thanks for the video good presentation.

[Syrius187]

Any videos of this mounted in your 600t?

[F4H33M97]

would cooling a 2600k and a gtx 570 be alright with this kit?

[PCModderMike]

@F4H33M97 Might wanna get the kit with the triple rad to cool a processor and a GPU.

[TechThoughts]

@PCModderMike If i would want to cool my GPU and CPU would this plus an 120mm rad work?

[Matice21]

did I hear you say youre running "12ghz?

[PCModderMike]

@Matice21 Haha no don't ever remember saying that, you must have misheard.

[Matice21]

@PCModderMike aw ok...I was gonna go over to my mom's house & slap her

[Cosmicvarion]

Gorgeous kit and great unboxing and overview, subscribed

[PCModderMike]

@Cosmicvarion Thank you

[D1rtyDubstep]

LOVE your videos, are there any major differances between that and the

"XSPC Rasa 750 RS240 WaterCooling Kit"

apart from the obvious reserviour in your drive bays,

thanks

[TutorialsPcBlog]

It's the pomp noisy?

[kevinthefirst]

What should be better, the nickel kit or the copper kit?

I don't know wich one i choose.

Thanks!

[tibothenr]

nice case :p

[jimmyakakev]

You give unboxing, reviews and guides to exactly what I'm planning to do... so helpful! Thanks =]

[BillieJean900]

does this work with the gtx 580 hydro copper

[LordJummy]

@BillieJean900 it will work with any water cooling component. just make sure you have the right sized barbs or compression fittings.

[ELmaestro370]

this is easy bulid ??

i can buy this kit on amazon

i have gtx 580 and pwerspllay 750 wat now in can sli 2 gtx 580 ?

thanx

[PCModderMike]

@fight360uk Thank you!

[domnal]

I'd prefer if you installed the water block carefully as opposed to "slapping it on there " as you quaintly put it in your video !! Never slap anything anywhere !

[PCModderMike]

@domnal Don't take it so literal bub, just a phrase we use over here in the states.

[domnal]

Yate Loon is pronounced Yatay Loon . EK will send you the best fans available at the time of packaging !!

[kosma928]

nice watch ! 

[avador22]

I see you have Acer 3D monitor can you change smooth motion in the settings of it at all? Just wondering since its 120Hz my TV has a setting like that and makes gaming 5 times better on it but its too big and I want something small

[jfrydom]

Yate loons are some of the most popular radiator fans out there (perhaps only second to gentle typhoons). I suspect They'll do much better than the Noctuas, although feel free to test yourself.

[PCModderMike]

@jfrydom Thanks for the advice. Do you use them? Or are you just going off what you've read online? Testing is in progress...I'm also looking at Gelid Wing's as well.

[PCModderMike]

@jfrydom Also, you're a member in TrubritarForums right? I've seen your profile pic before in there, can't forget it.

[abshassan]

Nice kit, if you do get the EK GPU blocks, becareful, with the Nikel plated models, they are known to have issues were the nikel has flaked off and going into the circulation of your loop. Also another suggestion is to not use the EK die, use destilled water with 99.9% pure silver in the res, and get coloured tubes! Nice build never-the-less

[PCModderMike]

@abshassan Whoops, thanks for the advice but too late. I already added the die, it was boring without it. But I already have some stuff I wanna change, I bought some white colored tubing to go with the theme of my build. And I read about the GPU blocks on EK's website, saw they been giving out RMA's for everyone who has one, but I don't think I'll be cooling the cards, the SOC is a non-reference PCB. Thanks again though!

[abshassan]

@PCModderMike ohh i see, well if thats the case, you should be good then! as for the white tubes, great choice, im guessing they are primoflex white tubes you went with?

[TheEhxpert]

IM buying this with my next pay check lol, I'm put it in the CM HAF X im getting.. i wanna see what this looks like functioning

[PCModderMike]

@TheEhxpert Haha cool man, you should get the kit with a 360 rad, it will fit perfectly inside your HAF X. I'll be posting a video of the kit installed and up and running in a couple days.

[TheEhxpert]

@PCModderMike would the rad end up on the back of the case? i wasn't sure if the rear fan was the right size for the kit or not..

[Dechomai]

Looking forward to some before and aftermath....er..."after".....­temperatures. I'd like to see how much better it is over the H70 (which I'm sure it is).

[PCModderMike]

@Dechomai Haha that's cool, I'm not to interested in how it compares to an H70 though, there's a lot of air heatsinks out there that perform better than an H70. I would like to know how it does against an H100, really wish it would come out and some reviews would start to be posted.

[Dechomai]

@PCModderMike Yeah...I was considering grabbing a H100. From what I've read, ETA is now end of July. Just curious how it would do with 4 Gentle Typhoon AP-15's in push/pull. Gonna wait for the reviews first though. Meanwhile, back at the ranch, i want to see how your rig fares.

[Dechomai]

Oh great...thanks loads, Mike....now you got me wanting one of those... and my wallet is on the floor writhing in agony and begging me to quit looking at this vid.

[PCModderMike]

@Dechomai Hahaha! Oh boy, then you're gonna hate me for saying this, but I have to point this out...the HAF X is PERFECT for the kit with a 360 rad!

[mironccr345]

FrozenCPU is going to add this video under the description page, just like that video on the XSPC Rasa kit. Nice break down, this kit really does have everything you need for first timers who want to water cool their pc. This vid makes me want to get the H360! Maybe i will water cool my RV02?? Nice job Mang!

[PCModderMike]

@mironccr345 DO IT!! Haha, thanks dude. Good luck trying to fit a 360 rad inside the RV02! Haha

[STYLERFELLA]

all of your videos are great, Mike! and this is not an exception, good job!

[PCModderMike]

@STYLERFELLA Thanks dude, appreciate that! 

[pointblack1000]

Nice video dude !

I´ll also be watercooling my setup soon :)

[PCModderMike]

@pointblack1000 Thanks man, good luck!

[pointblack1000]

@PCModderMike THX m8!