How to dismount an Hop Up M4/M16

[chinchorro67]

No me gusta este video, me parece mal..normalmente un fusil, se lo desarma,lo basico intemedio y avanzado(para armeros) y luego se lo vuelve armar paso a paso, eso deberia ser lo correcto, y comparto que la musica esta demas

[angel5554]

yo tengo un ak es parecido no?

[supersmashbrosevil]

you dont really know how to speak spanich right?

[AirsoftDomonation]

I dont think you need a knife to take off the barrel lock

[AirsoftMarksmen041]

Thank you so much for making this video. It helped me out a lot in the process of replacing a 300mm long barrel on my barrett rec7 with a 505mm barrel

[skaraskanner]

"kit" the screw of the principal gear

quitar-take out?? quien a exo la translation xD

[HalconNigro]

@skaraskanner Tienes razón. Fallo mio =(

[hilopx]

if you remove the hop up and put it back on does it affect the performance of the gun

[TheEdgartap]

you just took off the hop up bucking the nub is the actual piece that gives the BB hop up and you did not even do anything to it this video is epic fail

[whyusucksobad]

try SPANGLISH. this is not english...

[ebutu007]

gay music

[grace81617]

sorry dude but you are kinda stupid you dont have to take off the gears and instead of using a knife just use your nail

[claridude]

is this a KWA hopup?

[PolishSniper96]

Whats the brand of this m4? This the 2part cahmber?

[MastrPwnr72]

mine wont slide!!! i did all of the steps and it wont

[chinquecfro44]

I really dont understand why you had to invert the chamber at the end when you didnt do it in the begining while removing it.

[HalconNigro]

@chinquecfro44 Its just a way to fit the chamber easier, but it isnt necessary

[chinquecfro44]

@HalconNigro Oh ok!

[bufon250]

y la gomita pequeña ke viene?? ke hacemos con eya??por cierto un tutorial magnifico

[HalconNigro]

@bufon250 La gomita pequeña es el llamado ''nub''. No lo pierdas, es la pieca que ejerce la presión sobre la bola. Se instala justo debajo de la palanquita que subes y bajas. Para que me entiendas, cuando coloques la cámara del hop, tienes que poner esa gomita dentro del hueco que queda por donde sale la palanca, de forma horizontal.

[bufon250]

muchas gracias....ya va perfecto

[TheAirsoftAres]

NICE!!!!!

[sokratee2]

hey at 0:25 what does the spring do

[maxcorywright]

when you slide the barrel into the gun it stops the hopup from banging the gun :)

[sokratee2]

ok my spring on my gun got messed up so i took it off my gun

[bmil69]

keeps the unit at the right height.

[angrymuffin123]

keeps the barrel from moving around in the gun

[dogo650]

Pues sí, es un poco aparatoso lo de meter la gomita xD voy a tener que pedir ayuda xD

[harredanettkonto]

why could you whant to do that?...

[S33KY]

mine cant come of please help what do i do

[nickacendent]

this douchbag needs to learn to type...

[woobydoobyPS3]

this video sucks i broke my hop up doing WHAT YOU TOLD ME

[HalconNigro]

Man, if you broke it, and i not, evidently you have done something wrong, because, as you can see i diddnt' broke it xD

[shadowbrother18]

hey i removed everything the video told me to and my hop up still isnt coming off please help

[HalconNigro]

It dependes on your Hop chamber version, its the same as the video?

[YesOfficer]

You know you DONT have to take off the gear and that little pin, right? Just pop the collar off with the knife and pull the hopup unit off.

[spainuoe]

Gracias!!!

[seal73]

Instale una gomas mad bull shark azules en mi M4, esas vienen con una pieza bien pequeña, esa pieza donde va instalada?

[MrPhatzz]

when you say "kit" what do u mean?

[Polluxg]

He means remove

[holyknight13]

Thx man, Nice calm music ;)

[chapolepe18]

oye w , respondeme este post porfavor tengo una duda , este hop up es el mismo que el de ONE PIECE BARREL ?? , tengo un m4 JG enhanched version , sigo cada uno de tus pasos w , nomas que no puedo sacar el barrel del hop up , tendra algo que ver el one piece barrel ? , GRACIAS DE ANTEMANO

[xsmoothapplex]

what does the spring on the hop up do and if it messes up will the gun still peform well

[ObliviousXIII]

im pretty sure its for when the air release valve shoots back and forth during firing it pushes on the hop up unit and the spring it there to make it bounce back and forth so as not to get damaged so it is recommended that any part that were in your gun before you opened it should be there when u close it.

[pacomita]

hola que pasa si no destornillo y no quito el clip primero y saco el canon con el goma negra puedo danar algo? Lo que pasa es que eso hice el hop up nu responde lo muevo para ajustarlo pero no nivela el bibi de palstico como lo puedo arreglar. gracias

[HalconNigro]

Puede ser de la goma que esté mal montada o de que la cámara no funcione correctamente, en cualquier caso desmóntala y échale un vistazo.

Un saludo

[beckervldejazzcom]

I have bin useing SRC bb's with no luck

[beckervldejazzcom]

I got a problom my guns hopup isint working at all It still fires fine just no hopup and the bb's will ocationaly just role out of the barrel. Also I am thinking of installing a new hopup bucking sistem which should I buy.

[HalconNigro]

I have a similar problem on another replic. I solucionated it changing the Bb's manufacture, i was using G&P Bb's and i had a lot of problems, now i changed to SRC, Marui or EXTREME and its works perfectly. Try that, if not change anything, the problem may be the hop rubber.

[doomedp]

i got a problem, i cannot separate the hop up from the barrel :( one of my AEG features says "one piece barrel"...does something have to do with it?

[HalconNigro]

One piece barrel its only for your outter barrel, made in one piece, dont worry about your inner barrel.

To separate the hop up from the barrel you must kit out the small piece showed at the video, at normal chases

[Paavo93]

Great video! Thanks!

[chapolepe18]

que ondas , oye mi hop up casi no rinde efecto sera por la goma negra?

mi replica es un scar echo 1

[ronstar1222]

i just got my m16 it go's 380fps and it was working good but now the bbs are just falling out of the barrel. i opend up the gun the hop Up Bucking is good. can u tell me why when i frier the gun the bbs are just going 3 feet

[akalamokungsino2]

do you know silicone spray, try to put some of it^_^

[physilcybe4me]

Thank you so much for this video, my hop up bucking was off center so my gun would always hook left and lose some of its fps, after i took my shit apart and reset it properly i not only gained back my accuaracy but i am now getting way better compression, my gun was shooting 360-380fps now its doing 390-410 with .23g bbs!

[ronstar1222]

i need some help with my m16 its not working right the

[physilcybe4me]

whats the problem? maybe i can help.

[juanito571]

no tienes el puto desmonaje entero del m16 de jing gong

[shawnkilledyou]

la musica es muy mal

[virusofthedeath]

Una preguntilla, tengo en la mano una pequeña pieza redonda de goma que salió del hop up, no se que será ni donde va pero agradeceria que me respondieras es pequeñita y redonda con un agujero en medio de lado a lado.

Gracias.

[IhateSatan333]

great vid!

[dextructerion]

great video!!!

in minute 5.08 u were showing how to install the inner barrel into hop up chamber, why u had to reverse it ? i was wondering is there any effect of doing it ?

[erric288]

How do you get the hop up and barrel out of the gun?

[HalconNigro]

Well its depends of the gun, in this chase, of a M4,M16, Hk 416... You only need to take out the pin of the back of your gun, next to the stock, then, you can open the middel of the body and take out the inner barrel.

Sorry for bad english xD

[Stealthmaster14]

thanks for the vid man! This will help me when I get my M4

[rk5rk5rk5]

Hey thanks for sharing!!! Cool Vid... Relaxing Song hehehe...

[artval66]

were u just showing how to reasemble it or are we supposed to do that im confused. haha

[RKpianoman]

nice video...i stumbled upon it while trying to get my hopup off. mine still won't budge though, it's stuck on there good. Is the music in the background Yanni?

[HalconNigro]

Yes it is, Yanni ^^

[RKpianoman]

Good music choice. i don't know if it really fits airsoft, lol, but it's good music.

[birinbirinbirin]

im your 1000th view and thanx

[COVXGENERAL]

thanks alot man i was planning on getting a precision inner barrel for my gun and i didnt want to change hop-ups so this helped me alot

[Petzlfan]

why do you put the hop up unit back on upside down?

[HavokMarrow]

Hola, buen video pero tengo una duda, ¿por qué pones el hop up al reves y luego le das la vuelta? gracias, yo tambien tengo un hk416 y es la bomba.

Un saludo.

[HalconNigro]

Hola tio, gracias.

Pues mira, pongo el hop al reves, porque asi la goma no se queda haciendo arrugas, o almenos, las hace pero es mas facil que si lo metes normal, ya q la goma tambien se puede meter por donde esta la palanquita.

Gracias de nuevo !! ^^

[aminex]

nice video thanks.

[HalconNigro]

Thx man!!