Hey McIntec, I am wondering I have the same mixer and was wondering how to hook up Skype and Team Speak to the mixer. I have a sound card the HT Omega Striker and was wondering how you did this on your computer. Would you do a video on the setup of the computer, showing where the cables are plugged in on the computer and what program and/ or the playback and recording devices setup. If you could do this that would be great.
@mrcleanup14 That sounds like a good idea for a future video on how you can use your mixer for TeamSpeak and Skype. I would love to do a video to show how it works.
i have a drum kit, im going to mic it up with 7 mics and i would like to know a good mixer with 8 or so mic imputs that is relativly cheap 100-150 dollars... can you help?
@kevinoo5 For optimal sound and optimal singal noise ratios, you should try to always keep your signals on 0dB. In more complicated mix situations, the channels can be gained lower to harmonize the mix. Keeping your fader around 0dB gives most precise control (has to do with the 'shape' of the faders' fade). This in a short 500 characters (YouTube's max), because it contains enough material to write a small book about.
@liafalvo It depends on your input signal strength. Put your gain on 0dB and hit the SOLO button. Make sure your audio source (playback device) is outputting at 100% and then have a look at the LED VU meter (the 'volume' lights on the right): if it passes 0dB, the +4 boost is too much, so you'll be better off on -10 mode. If it's on -10 already, just try out the +4 mode. As long as it doesn't pass the 0dB on the VU, you can use +4 mode.
The button basically gives you 2 different gain ranges.
@richreid45 line input on the computer if it is available, otherwise the mic input will work. Just need the right cables and make sure to set your levels correct to avoid distortion.
"Some people don't like to hear themselves, but I do... because I liek o hear if I have a good mix" ..and because he just loves hearing himself (^_^) j/k
Providing a link to your own account in your own video = interested :P
Great video! Great explanation of everything! Good show!
Question.. What do the numbers on the right mean. The digital blue lights..?
YouJustGotPrankedWeb 1 week ago
@YouJustGotPrankedWeb current effect. There is 100 different effects to choose from.
McIntec 1 week ago
@McIntec Oh okay. Thanks for your reply Jason!
YouJustGotPrankedWeb 1 week ago
Hey McIntec, I am wondering I have the same mixer and was wondering how to hook up Skype and Team Speak to the mixer. I have a sound card the HT Omega Striker and was wondering how you did this on your computer. Would you do a video on the setup of the computer, showing where the cables are plugged in on the computer and what program and/ or the playback and recording devices setup. If you could do this that would be great.
mrcleanup14 1 month ago
@mrcleanup14 That sounds like a good idea for a future video on how you can use your mixer for TeamSpeak and Skype. I would love to do a video to show how it works.
McIntec 1 week ago
This has been flagged as spam show
i have a drum kit, im going to mic it up with 7 mics and i would like to know a good mixer with 8 or so mic imputs that is relativly cheap 100-150 dollars... can you help?
iceydanpowns 3 months ago
Comment removed
iceydanpowns 3 months ago
I have an M-AudioDelta 66. how can i set up this mixer with the audio card?
Yesasao 3 months ago
Why are the faders all the way up?
kevinoo5 4 months ago
@kevinoo5 For optimal sound and optimal singal noise ratios, you should try to always keep your signals on 0dB. In more complicated mix situations, the channels can be gained lower to harmonize the mix. Keeping your fader around 0dB gives most precise control (has to do with the 'shape' of the faders' fade). This in a short 500 characters (YouTube's max), because it contains enough material to write a small book about.
jurjenbarel 3 months ago
The "line in 5/6, 7/8, 9/10, 11/12 grey button on top, do the buttons have to be pressed doen or up (+4, -10).
Thank you
liafalvo 5 months ago
@liafalvo It depends on your input signal strength. Put your gain on 0dB and hit the SOLO button. Make sure your audio source (playback device) is outputting at 100% and then have a look at the LED VU meter (the 'volume' lights on the right): if it passes 0dB, the +4 boost is too much, so you'll be better off on -10 mode. If it's on -10 already, just try out the +4 mode. As long as it doesn't pass the 0dB on the VU, you can use +4 mode.
The button basically gives you 2 different gain ranges.
jurjenbarel 3 months ago
can this mixer also work with a PC?
TheRichardacosta 5 months ago
@TheRichardacosta Yes, if you connect it to the sound card.
McIntec 5 months ago
Nice and informative video pal, got mine today, its pretty good to be honest does the job...
XaiQ 6 months ago
quick tip: put the camera on a tripod, and zoom in to get close, it was kind of shaky, but still good!
jazzmaster700 6 months ago
when plugging behringer ub2222fx-pro ,into my presonus audiobox interface ,will i lose my tracks with logic express 9
vjones992 7 months ago
when plugging your mack-mini to your ,do I lose anything as far as the amount of tracks within my logic 9 express
vjones992 7 months ago
How much does this Behringer costs?I own a PMP 3000, but I just find out that it's usefull at talking to a crowd.
BlackTurtle82 7 months ago
Hey for ur mixer when you connect it to the computer does it go into your mic port or a USB slot?
richreid45 10 months ago
@richreid45 line input on the computer if it is available, otherwise the mic input will work. Just need the right cables and make sure to set your levels correct to avoid distortion.
McIntec 9 months ago
Great video.
techzany 1 year ago
@techzany Thank you! I enjoy your comments. :)
McIntec 9 months ago
This was quite informative. Cant wait to get one.Great channel, Great vids. We need some disciples of the merc like you. Come help us Merc Bad Coms
MercTheComs 1 year ago
*like to
*interesting
xD
haversman 1 year ago
"Some people don't like to hear themselves, but I do... because I liek o hear if I have a good mix" ..and because he just loves hearing himself (^_^) j/k
Providing a link to your own account in your own video = interested :P
Great video! Great explanation of everything! Good show!
haversman 1 year ago
Great job of explaining it. I do have a Skype question, I'll hit you up on email and try to explain it. Thanks...Tim
tims1063 1 year ago
good video :)
pilloman 1 year ago