@NicDHa it didn't arived yet, i live in brazil so it take some time. I'll get it this week, can't wait for it. When i get my hands on it I'll tell you how it is.
Hey Jeff, love your videos. So you talked about possibly sending it in to get it re-anodized. I'm thinking of doing just that and don't really know where I'd send it in to. So where did you have in mind? and would it keep the patterns on the inserts? Thanks!
Killer review!! I own a 42 and have a green and gold limited production 51 on the way. Can't wait. On these limited production 51s they have stone washed SV30 steel that is numbered on the blade. Example (111 of 200). Just killer. I am a huge collector and and can't wait to get my hands on this Bali- song. Watch your six.
I just realized you posted this in 2009 and said that in about a year if they're still making them the price should go from $265 down to about 180-200.
Hey, i just recieved my model 51 a few days ago, iam loving the knife, but the handles are a little lose(they wobble a tiny bit), i tried tightening up the pivot screws but once i get it to the point where it doesn't wobble anymore the blade moves with extreme resistance, i was thinking about applying some sort of lubricant on the pivot screws but iam not sure which lubricants are safe or not, could i have your thoughts on this and what i could do to fix this?
@7footShadow Its supposed to have some play.. the handles are supposed to be a little "loose" so that the blade is moving free If its really loose then only tighten it up a bit if not just loosen it back to original
i just got my 51 this week. i have to admit i was pretty disappointed by the blade not being very sharp at all. d2 isn't my favorite. great video as always
It will heal faster but it also takes longer to stop bleeding BECAUSE its a clean cut. I have filleted my hand open minutes after stropping my blade and it can take up to an hour for the blood platelets to coagulate and stop the bleeding.
@HarveyMilk26 does not apply to all knives, only balisongs and switchblades. I can carry my cold steel rajah in cali if I like, and I am not breaking the law when I do.
@MrSkippydoodle You're the douchebag. Why don't you go fuck yourself you stupid hypocritical, immature 18 year old. Don't start shit for no reason. This man does what he does because he enjoys it. And you? You're the kind of person that I wouldn't mind getting my expensive knife dirty on. Catch my drift, jackass?
I had a problem where the latch would get suck in the open position while filliping, you can take the g10 layer off, and put a bar in there for tension (i used a tiny phillips) and bend it a bit back, no more problem!
@MrSkippydoodle no, i think the reason you dont go showing off your knives is because you dont have any knives nice enough to show off. Also, i've come up with a solution. Every day, i carry a 710, as well as a 51. if i'm ever cutting something i'm afraid might damage my knife or whatever, i use the 710, not the 51, though there are times that i use the 51. and i dont worry about my 710 because the only thing i will damage is the blade, which i can replace. plus there is the lifetime warranty.
ok guys i think the comments are getting a little out of hand...... last i checked, this video is about a knife, not sex toys.... how about we talk about the knife and not anal sex toys and boyfriends??? idk just seems like a good idea to me.
Hey. How many things do you love to do, and love to share with the world and others that share your passion? Your boyfriend? thats what i thought, fucken fag.
@mrvenom1231 Dont insult his collection of anal sex toys. If he wants to be a cock sucking faggot, let him. Some people masturbate, and i guess some people get off on shoving long rubber penises up there ass. Well, whatever floats your boat and makes you come.
Hey jeff, Im confused on The Flipping Arena, I dont no how to trade a knife or something, Im looking to trade a Benchmade Model 51 for a Spyderco Spyderfly, Do you think you could find someone willing to trade?
@MrSkippydoodle you know your just making an ass of yourself knocking on something that someone likes to do. What if i were to see what you do as a hobby and tell you straight to your face that its dumb that i don't like it think about how that would feel, and also consider this im going to start up a hobby of collecting bali-songs. So next time think before you post as you could offend some people quite a lot.
@MrSkippydoodle " i think i missed it when i was having sex with a woman" I love this comment, its just goes to show your just another hypocritical douchebag...hmmm I have a real life and get laid so I dont have time to collect knives...yet you comment on a knife review on youtube...yeah...whatever man...
@MrSkippydoodle "most people dont put that kind of money into a knife." Ever been to bladeforums? 100,000 strong and a good cunk of them own several knives worth $500 each...ever been to a knife show? you wouldnt want to eb showing off your bear and sons balis there...to each there one, buy quality once and enjoy it forever buy cheap and keep replacing it...either way your going to spend the money
just got mine a couple days ago, love it. i use it all the time at work even gutted a couple fish with it, the blade is still flawless i broke the edge down a little on a fine stone to make it last a little longer
I'm thinking about selling my 32 to get a 51 my views about carrying balisong have changed and the 51 seems like something I would like to use and flip
i love this knife that is all i have to say i have been saving up for it so hopefully i will have one soon i have the bradley kimura II right now and i love it i just put up a review it would be cool if you could check it out and give some advice
@JapaneseAnimationMan the latch gate prevents that from getting near the tip of the blade. it even locks in the open position with the new style spring. very nice IMO.
@JapaneseAnimationMan No. As he said in the video, it would bounce back before it got anywhere near the blade. Benchmade is smart, theres a reason for every modification design.
@JapaneseAnimationMan No. As he said in the video, it would bounce back before it got anywhere near the blade. Benchmade is smart, theres a reason for every modification design.
The spacers aren't decorative, they actually add weight to the handles and give the knife more balance towards the handles. I thought they were also decorative, but I found out that they were heavier than usual spacers lol
just picked up my model 51. cheap balisongs just don't compare. Its like holding a Les Paul after a Fender squire. People pay more for cellphones that they will replace after a few years, this knife is going to last much much longer.
The handles look sandwiched. If that's the case, how sturdy are they? Can you squeeze them and have the two sides come together like you did in your "Quality vs Crap" video?
I have this blade and it's amazing, but I hope Benchmade comes out with another full titanium blade. I really want this "click-clack" noise that full metal will give.
i found it funny that in New York, where (legal) concealed weapons are few and far in between because of the strict laws, you can carry any knife (as defined by the state) you want as long as you dont intend to injure with it.
while in South Carolina, where they have tax free gun sales on Labor Day and very simple and lenient CCW laws, you cant carry a knife over 2.5 inches....
Just got my 51 today, I do seem to have a problem though. My latch doesn't seem to pop open unless pressure is applied to the actual latch itself via thumb while squeezing. Not sure if theres some adjustment i need to make. Lit
I sadly rate this a 4/5 because, I lost the T6 torx screw next to the bite handle on the pocket clip side after 36 hours of purchase and approximately 1000 opening and closures. The latch screws constantly need re-screwing and if you screw them to tight they will make the latch stuck. As my first balisong I'd say it's extremely precision engineered in design but the screws were over looked. I would use loc-tite but that could compromise the spinning axles. The safe side latch paint wares off to.
@SPINEXM1 it is what it is, I feel bad when I see cool old muscles cards I can never buy, thats just life...if your really into teh hobby you will save upo for a nice one if you diotn care that much then your cheapo will be fine
@cutlerylover I couldnt agree more jeff, You should not feel bad because someone says they are "Cheapo" because the truth is they are, Its hard to find a decent balisong for anything under 100$ besides a Kimura, Other balisongs will break and are made very poorly, If you truely love the hobby you would save up for a Benchmade, $200 is not that much money and it is defently worth it to invest into a Benchmade balisong.
@TheMrairsoftkid if you drop it on the tip it will most probably snap the tip off but if you drop it anywhere else (apart from the blade) it should be fine
is it illegal to own a balisong if you're in a state that doesnt alow you to carry them? because my dad gave me one that he had before they became illegal in my state and i dont want to get in trouble.
@schneibgamer1 im not jeff obiously (wish i was) but most of the time you are allowed to be in possession but not have it concealed (carried) but you can google it
@cutlerylover you are by far the best reviewer/collector/trainer there is on youtube, i have watched all your balisong vids. i am a collecter myself but nothing compared to u keep it up pls and how about a reveiw on the model 53
Basically, from what I understand, loctite (blue 242 I believe is what you would use) makes it that your knife's pivots will not come loose. If you want to loosen it you could heat it up.
Just move the the USA. With proper licenses you can own grenade launchers (and HE frag grenades fro them) full auto guns, silencers, and just about any type of weapon you can imagine. Of course you need a clean criminal record and money for tax stamps but it's still possible. Without licenses you can get a flamethrower, and I beleive a minigun.
Laughed so hard at 19:48
MrPlatypusisms 3 days ago
Comment removed
nadnerbbk 1 week ago
@NicDHa it didn't arived yet, i live in brazil so it take some time. I'll get it this week, can't wait for it. When i get my hands on it I'll tell you how it is.
Marcelos11 1 month ago
one of the screws fell out on the little bars near the blade and i cant find it... FUUUUUUUUUUUUUUCK
tarheelskk 1 month ago
@tarheelskk send it to bm and they'll replace it
shawn4201111 4 weeks ago
Still trying to decide between this and the 62 coming out.
zysilveria 1 month ago
@zysilveria the 62 got somewhat of a latch gate, it looks like. main difference would be weight, looks, and price. either way, you get a great bali.
redandbluebeater 1 month ago
@zysilveria 62 all the way.
alecjones665 1 month ago
Just bought one, my first bali. Can't wait to get it.
Marcelos11 1 month ago
@Marcelos11 take a look at the limited version on the benchmade 51 nice blade greenish color :)
skullscooter65 1 month ago
@Marcelos11 how is it?
NicDHa 1 month ago
Benchmade 51 or 32?
TheThat1DUDE 1 month ago
I have a Kimura 3 balisong, i got it for about 100$
I really like the things i hear about the 51 and i like that its lighter then mine.
I was just wondering, anyone that has both of these knives or just the 51 if its worth twice the price of my kimura.
tarheelskk 1 month ago
my srceen frosted up!!!!!!!!!!!!!!!!!!!!!!!!
MrTwix80 2 months ago
the red would stand out more than blue :)
Yoshiguy13 2 months ago
man i really want one of these, but is it woth forking over that much money when i can get 3-4 nice high value knives instead?
arcrobe 2 months ago
Hey Jeff, love your videos. So you talked about possibly sending it in to get it re-anodized. I'm thinking of doing just that and don't really know where I'd send it in to. So where did you have in mind? and would it keep the patterns on the inserts? Thanks!
gettinSC 2 months ago
The spine is "crowned".
coolbrandon92 2 months ago
Gold on black would be awesome, especially since the titanium liner is already jeweled.
coolbrandon92 2 months ago
Killer review!! I own a 42 and have a green and gold limited production 51 on the way. Can't wait. On these limited production 51s they have stone washed SV30 steel that is numbered on the blade. Example (111 of 200). Just killer. I am a huge collector and and can't wait to get my hands on this Bali- song. Watch your six.
FullyAutomatic9 2 months ago
I just realized you posted this in 2009 and said that in about a year if they're still making them the price should go from $265 down to about 180-200.
2011 and they're still $265
bubblebrainz7l7 2 months ago
@bubblebrainz7l7 msrp.... bladeplay has them for 199
timesplitingking 2 months ago
hey, I just got into balisongs and I am about to upgrade from my bear and son bali. would you recomend the 51 or the 32?
ryan2010hecker 2 months ago
I have ONE BM42 left, if interested MESSAGE me, but act fast cause it won't last!
kapipo1 4 months ago
@kapipo1 ill pay 300
codpablo1 3 months ago
@kapipo1 ill pay 300
codpablo1 3 months ago
ignore the last mrsjosie2024 post that was me thinking i was signed into my account
fucking google keeps signing her into youtube when she checks her Gmail
enjoiorange 5 months ago
looking at a bradley kimura prototype can i get your opinions on this blade
mrsjosie2024 5 months ago
@mrsjosie2024 there is a review of it...
creating13 3 months ago
You sound like the scout - irony.
musacworld 5 months ago in playlist More videos from cutlerylover
6:16 i removed the clip and now i cant put it back together, DONT REMOVE THE DAMN CLIP
petersonA95 5 months ago
i just ordered my 51, exclucive one of 200 made green g10 with gold anodized titanium :D will post a vid soon
xXpinhead 5 months ago
Are the G-10 handles shatter-proof?
OdysseyBMX18 5 months ago
what is the best balisong that isn't the 42 model?
Poissonkarate 5 months ago
We have the same serial number ! 0.0
MrSnakeplayer 6 months ago
Did you ever make that video comparing the 32 with the 51?
BenTheDream1018 6 months ago 2
If balisongs are illegal in the USA why are they made in the USA
FallingSkyCows 6 months ago
@FallingSkyCows I herd u liek state laws.
DirtyRat9001 6 months ago
@FallingSkyCows Balisongs aren't illegal in the all parts of the US
tmunds1 6 months ago
Don't feel stupid, the preview idea is really funny
blindsk8r490 6 months ago
Hey, i just recieved my model 51 a few days ago, iam loving the knife, but the handles are a little lose(they wobble a tiny bit), i tried tightening up the pivot screws but once i get it to the point where it doesn't wobble anymore the blade moves with extreme resistance, i was thinking about applying some sort of lubricant on the pivot screws but iam not sure which lubricants are safe or not, could i have your thoughts on this and what i could do to fix this?
Thanks a lot.
Dennis.
7footShadow 6 months ago
@7footShadow Its supposed to have some play.. the handles are supposed to be a little "loose" so that the blade is moving free If its really loose then only tighten it up a bit if not just loosen it back to original
konkero869 6 months ago
@7footShadow
its fine if they have some wobble, don't worry about it
47trea 4 months ago
i just got my 51 this week. i have to admit i was pretty disappointed by the blade not being very sharp at all. d2 isn't my favorite. great video as always
kyles007 6 months ago
It will heal faster but it also takes longer to stop bleeding BECAUSE its a clean cut. I have filleted my hand open minutes after stropping my blade and it can take up to an hour for the blood platelets to coagulate and stop the bleeding.
decimator22 6 months ago
@cutlerylover you were talking about how cheap knives indent where the tan pin hits, does that happen on the Bradley kimura?
lumsify 6 months ago
Selling my BM51. Like new in box. Pm me! Going for 170 shipped
spartan1o5 6 months ago
is it legal in california and if so where
mikster97 6 months ago
@mikster97 yes theyre legal in cali but its illegal to carry in public if the blade is more than 2 inches that law applies for all knives
HarveyMilk26 6 months ago
@HarveyMilk26 does not apply to all knives, only balisongs and switchblades. I can carry my cold steel rajah in cali if I like, and I am not breaking the law when I do.
SactownClownin 6 months ago
@SactownClownin oh ok thanks
HarveyMilk26 6 months ago
The gpknives has gold liners not blue green g10 not black and s30v not d2
pnkrocker881 6 months ago
and its s30v
pnkrocker881 7 months ago
@pnkrocker881
Correction: the blade is D2 tool steel.
I prefer S30V, though.
potatoheadhaoy 6 months ago
jeff check out gpk! they have a green g10/gold liner exclusive ltd edition kinda last minute its only 200 pieces!
pnkrocker881 7 months ago
would you need to locktight this?
zillahero 7 months ago
I finally have the money to get one of these. Shipping right now, I can't wait!
loopnana 7 months ago
Balisongs are legal to carry in Oregon, where Benchmade's HQ is.
tmunds1 7 months ago
@cutlerylover Should I get a 32 mini morpho or a 51 morpho. Also should it be black or is the extra money not worth it?
Redy8009 7 months ago
@Redy8009 for your first one i would get the satin blade not the black
UDflyer04 7 months ago
benchmade needs to bring back the 42... : /
junrenman 7 months ago
i know ur busy with the new website n all but would u prefer this over bradley kimura series?
jesossiltberg 7 months ago
Would you sell me one of these? If so, for how much?
Ch40sPh4nt0m 7 months ago
Great knife, been using ever since my 3 cheap knives fell apart systematically. So much better.
nimpercent 8 months ago
Everyone talks about the Bmade 42, but I can't find one to buy anywhere.... so the 51 is going to be in my cart after I resell my Lum Tanto Sprint
WalTxAaroN 8 months ago
@MrSkippydoodle You're the douchebag. Why don't you go fuck yourself you stupid hypocritical, immature 18 year old. Don't start shit for no reason. This man does what he does because he enjoys it. And you? You're the kind of person that I wouldn't mind getting my expensive knife dirty on. Catch my drift, jackass?
BlackpowderKF 8 months ago
Been abusing the shit out of my model 51..
I had a problem where the latch would get suck in the open position while filliping, you can take the g10 layer off, and put a bar in there for tension (i used a tiny phillips) and bend it a bit back, no more problem!
MPSecare 8 months ago
@MrSkippydoodle no, i think the reason you dont go showing off your knives is because you dont have any knives nice enough to show off. Also, i've come up with a solution. Every day, i carry a 710, as well as a 51. if i'm ever cutting something i'm afraid might damage my knife or whatever, i use the 710, not the 51, though there are times that i use the 51. and i dont worry about my 710 because the only thing i will damage is the blade, which i can replace. plus there is the lifetime warranty.
69avocado 8 months ago
ok guys i think the comments are getting a little out of hand...... last i checked, this video is about a knife, not sex toys.... how about we talk about the knife and not anal sex toys and boyfriends??? idk just seems like a good idea to me.
69avocado 8 months ago
@MrSkippyDoodle
Hey. How many things do you love to do, and love to share with the world and others that share your passion? Your boyfriend? thats what i thought, fucken fag.
MegaRedfox21 8 months ago
@mrvenom1231 Dont insult his collection of anal sex toys. If he wants to be a cock sucking faggot, let him. Some people masturbate, and i guess some people get off on shoving long rubber penises up there ass. Well, whatever floats your boat and makes you come.
VisualBasicRules 8 months ago
should i get this knife or no sum1 plz respond fast!!!!!
1234alienkiller 8 months ago
@1234alienkiller yes
o0BEASTY0o 8 months ago
@1234alienkiller yes you should. buy off blade hq, lowest price of 190
Mr69avocado 8 months ago
@Mr69avocado GPknives has it for $165 plus shipping
WalTxAaroN 8 months ago
Hey jeff, Im confused on The Flipping Arena, I dont no how to trade a knife or something, Im looking to trade a Benchmade Model 51 for a Spyderco Spyderfly, Do you think you could find someone willing to trade?
FlipBalis 8 months ago
@MrSkippydoodle you know your just making an ass of yourself knocking on something that someone likes to do. What if i were to see what you do as a hobby and tell you straight to your face that its dumb that i don't like it think about how that would feel, and also consider this im going to start up a hobby of collecting bali-songs. So next time think before you post as you could offend some people quite a lot.
mrvenom1231 8 months ago
@MrSkippydoodle " i think i missed it when i was having sex with a woman" I love this comment, its just goes to show your just another hypocritical douchebag...hmmm I have a real life and get laid so I dont have time to collect knives...yet you comment on a knife review on youtube...yeah...whatever man...
cutlerylover 8 months ago 42
@cutlerylover your comment to mrskippydoodle made my day thank you!
saltycupcakes 2 months ago
@MrSkippydoodle "most people dont put that kind of money into a knife." Ever been to bladeforums? 100,000 strong and a good cunk of them own several knives worth $500 each...ever been to a knife show? you wouldnt want to eb showing off your bear and sons balis there...to each there one, buy quality once and enjoy it forever buy cheap and keep replacing it...either way your going to spend the money
cutlerylover 8 months ago
the 51BK is a lot better
UDflyer04 8 months ago
amazon sales the same one
13captainamerica 8 months ago
just got mine a couple days ago, love it. i use it all the time at work even gutted a couple fish with it, the blade is still flawless i broke the edge down a little on a fine stone to make it last a little longer
Xx8SAM8xX 9 months ago
i just got a benchmade knife (940 osborne) that is next on my list
tomjoc67 9 months ago
I'm thinking about selling my 32 to get a 51 my views about carrying balisong have changed and the 51 seems like something I would like to use and flip
Hissatsu5 9 months ago
@Hissatsu5 how much?
delbert505 9 months ago
@delbert505 not sure I'm working on some other transactions that I need to take care of first
Hissatsu5 9 months ago
or 32/51
jakeboston100 9 months ago
can u sell me a 42
jakeboston100 9 months ago
where did you get your knife
ViolentVz 9 months ago
i love this knife that is all i have to say i have been saving up for it so hopefully i will have one soon i have the bradley kimura II right now and i love it i just put up a review it would be cool if you could check it out and give some advice
zombinator100 9 months ago
you need to make a new review for this balisong with beter quality
GeorgeGJD 9 months ago
Is there a BM51 black (prefferably serrated)
xNuclearWiNTeR 9 months ago
@xNuclearWiNTeR Yessirr, plain and serr, look up "benchmade 51 balisong" on BladeHQ.c0m
wanna let me know what the difference is between the two?
linkinparkam10 9 months ago
I'm getting my 51 on thursday, looking forward to it.
NuclearXmas 10 months ago
if the pin doesnt stay straight like the 42, wont it accidently hit the blade and damage it?
JapaneseAnimationMan 10 months ago 6
@JapaneseAnimationMan no the design keeps it away from the blade
UDflyer04 10 months ago
@JapaneseAnimationMan it does have a whatcamakallit gate so it goes down, but not that far down
knisleyfilms 8 months ago
@JapaneseAnimationMan the latch gate prevents that from getting near the tip of the blade. it even locks in the open position with the new style spring. very nice IMO.
GunnarTh3Azul 6 months ago
@JapaneseAnimationMan No, the blade isn't long enough to hit it, same with the 32. They learned their lesson from the old T-latch benchmades haha
LordChrisHimself 6 months ago
@JapaneseAnimationMan No. As he said in the video, it would bounce back before it got anywhere near the blade. Benchmade is smart, theres a reason for every modification design.
Redy8009 5 months ago
@JapaneseAnimationMan No. As he said in the video, it would bounce back before it got anywhere near the blade. Benchmade is smart, theres a reason for every modification design.
Redy8009 5 months ago
@JapaneseAnimationMan I assume it has a latch gate.
TankMedia 4 months ago
The spacers aren't decorative, they actually add weight to the handles and give the knife more balance towards the handles. I thought they were also decorative, but I found out that they were heavier than usual spacers lol
MystikEssence 10 months ago
i've come to like the 51 more than the 42.....
UDflyer04 10 months ago
just picked up my model 51. cheap balisongs just don't compare. Its like holding a Les Paul after a Fender squire. People pay more for cellphones that they will replace after a few years, this knife is going to last much much longer.
MPSecare 10 months ago 2
Comment removed
NuclearXmas 10 months ago
@MPSecare I got those two guitar and i can't agree more ^^
oignongrognon 10 months ago
This has been flagged as spam show
@MPSecare I got those two guitars and i can't agree more ^^
oignongrognon 10 months ago
have the inserts uparmored.
superpwn2000 10 months ago
The handles look sandwiched. If that's the case, how sturdy are they? Can you squeeze them and have the two sides come together like you did in your "Quality vs Crap" video?
BoozyBeggar 10 months ago
@BoozyBeggar On my 51 if I squeeze the middle as hard as I can they will squish together about 1 to 2 millimeters.
ehhhhhhfssssssfdtg 10 months ago
@ehhhhhhfssssssfdtg Ah, so its solid. Good, thanks for the info.
BoozyBeggar 10 months ago
I suppose you wasted my time talking about f*cking "pouch".
EasyEnergy 10 months ago
Should i get this or 32 morpho?
deerslayer700 11 months ago
I have this blade and it's amazing, but I hope Benchmade comes out with another full titanium blade. I really want this "click-clack" noise that full metal will give.
jessehbk3 11 months ago
Does the latch ever get in the way during flips?
Insertnamehere01 11 months ago
@Insertnamehere01 No. I can't figure out how to explain the system but no it won't get in the way
ehhhhhhfssssssfdtg 10 months ago
just bought mine. can't wait to see it next week
jessehbk3 11 months ago
i found it funny that in New York, where (legal) concealed weapons are few and far in between because of the strict laws, you can carry any knife (as defined by the state) you want as long as you dont intend to injure with it.
while in South Carolina, where they have tax free gun sales on Labor Day and very simple and lenient CCW laws, you cant carry a knife over 2.5 inches....
CrimsonOmen407 11 months ago
dog
12345678927164 11 months ago
my favourite model
lucdavid007 11 months ago
Comment removed
NuclearXmas 11 months ago
Just got my 51 today, I do seem to have a problem though. My latch doesn't seem to pop open unless pressure is applied to the actual latch itself via thumb while squeezing. Not sure if theres some adjustment i need to make. Lit
Vehei00 11 months ago
@Vehei00 probably benchmades fault
thejustinl1 11 months ago
15 assholes dont know how to live
thay disliked this vid
12345678927164 11 months ago
he shod do a new review on the 51 in HD!!!!!
12345678927164 11 months ago
hey where did you find one for 190
rsinall93 11 months ago
@rsinall93 $165 in PA.
12345678927164 11 months ago
I sadly rate this a 4/5 because, I lost the T6 torx screw next to the bite handle on the pocket clip side after 36 hours of purchase and approximately 1000 opening and closures. The latch screws constantly need re-screwing and if you screw them to tight they will make the latch stuck. As my first balisong I'd say it's extremely precision engineered in design but the screws were over looked. I would use loc-tite but that could compromise the spinning axles. The safe side latch paint wares off to.
IMFDB 11 months ago
Just bought one....cost me an arm and a leg but OH MY GOD the difference between a 15 bucks cheapo and this is amazing.
podsmokingloser 11 months ago
AWTHOME
TheTrappybeaver 11 months ago
Comment removed
AlexCheungy 11 months ago
u make me feel bad when u say cheapo balisong and such those are just to expensive for me to afford
SPINEXM1 11 months ago
@SPINEXM1 it is what it is, I feel bad when I see cool old muscles cards I can never buy, thats just life...if your really into teh hobby you will save upo for a nice one if you diotn care that much then your cheapo will be fine
cutlerylover 11 months ago 17
@cutlerylover yeah, thats true, i bought the BMW e46 from 2002 year, and now i dunno who will buy fuel for me coz we've got bad times in Poland.
szolekxxx 11 months ago
@cutlerylover "If something's worth doing, it's worth doing right"
crephotos 10 months ago
@cutlerylover hey i would like to trade but i do not know where or what website can you pleas fill me in thx
912jazzfreak 9 months ago
@cutlerylover I couldnt agree more jeff, You should not feel bad because someone says they are "Cheapo" because the truth is they are, Its hard to find a decent balisong for anything under 100$ besides a Kimura, Other balisongs will break and are made very poorly, If you truely love the hobby you would save up for a Benchmade, $200 is not that much money and it is defently worth it to invest into a Benchmade balisong.
Extr3meTrampoline 8 months ago
what happens when you drop it on like cement or tile?
TheMrairsoftkid 1 year ago
@TheMrairsoftkid if you drop it on the tip it will most probably snap the tip off but if you drop it anywhere else (apart from the blade) it should be fine
TheNeedyCat 11 months ago
@TheMrairsoftkid it looks better
12345678927164 11 months ago
at 27:32 : Gentlemen...
keaganater234 1 year ago
Gentlemen...
keaganater234 1 year ago
a live blade lol i hate messing up gun and knife terms. the other day i said check out my new pistol sheath XD
afrojew6969 1 year ago
Jeff-
is it illegal to own a balisong if you're in a state that doesnt alow you to carry them? because my dad gave me one that he had before they became illegal in my state and i dont want to get in trouble.
-Schneib
schneibgamer1 1 year ago
@schneibgamer1 im not jeff obiously (wish i was) but most of the time you are allowed to be in possession but not have it concealed (carried) but you can google it
M1Garand30Cal 1 year ago
were do i find which states they are legal to carry in?
jubjubem 1 year ago
anyone know how good of a flipper the 51 is?
BFBC22 1 year ago
@BFBC22
i think it flips very well and i have the 4x series to compare it to
UDflyer04 1 year ago
i am looking for a model 42 can any 1 healp me out?
XxxxXAndrewXxxxX1 1 year ago
@XxxxXAndrewXxxxX1 go to the benchmade website
RAINMAN22TP 1 year ago
@RAINMAN22TP they discontinued them
XxxxXAndrewXxxxX1 1 year ago
does it have a spring latch the same as the benchmade model 42?
xShotgun1414x 1 year ago
@xShotgun1414x yes
pinolikescheeseidont 1 year ago
doggy
yoyosrule321 1 year ago
@yoyosrule321 you r really really funny btw, like lol. i would date u if i was a girl. if iwas ugly betty
pinolikescheeseidont 1 year ago
@cutlerylover what kind of oil
pinolikescheeseidont 1 year ago
@cutlerylover is there a model of this that comes with a Bowie style blade instead of the spearpoint blade?
Sculcrusha 1 year ago
not there isnt
pinolikescheeseidont 1 year ago
@cutlerylover you are by far the best reviewer/collector/trainer there is on youtube, i have watched all your balisong vids. i am a collecter myself but nothing compared to u keep it up pls and how about a reveiw on the model 53
pinolikescheeseidont 1 year ago
@pinolikescheeseidont there is 1
rubinsteinskate 1 year ago
thnx
pinolikescheeseidont 1 year ago
whats loctite
pinolikescheeseidont 1 year ago
@pinolikescheeseidont
Basically, from what I understand, loctite (blue 242 I believe is what you would use) makes it that your knife's pivots will not come loose. If you want to loosen it you could heat it up.
inverseactuality 1 year ago
Would you recommend this as a beginner flipper?
inverseactuality 1 year ago
@cutlerylover whee do you live man like i want to move there just for the wepons to be legal un like fuckin canada
AZAZOZ 1 year ago
@AZAZOZ
Just move the the USA. With proper licenses you can own grenade launchers (and HE frag grenades fro them) full auto guns, silencers, and just about any type of weapon you can imagine. Of course you need a clean criminal record and money for tax stamps but it's still possible. Without licenses you can get a flamethrower, and I beleive a minigun.
inverseactuality 1 year ago
This has been flagged as spam show
many people dont know it but you can put your weed in that pouch
noodlesman12 1 year ago
many people dont know it but you can put your weed in that puch
noodlesman12 1 year ago
@jimkressin Because of how it opens.
Kylef7735 1 year ago
i got my first real bali in the mail today, its the bm 51
slowridetodeath 1 year ago
How do you take the clip off? I unscrewed it, but the two threaded prongs are stuck to it.
LUVleeKristine7881 1 year ago