2011 NitroMad48 Update!!! Platinum Revo, Losi LST2, Baja 5B, Upcoming Cars, Gear, and Videos!

[nitroracer3]

whats better a revo or a slayer pro

[nitroracer3]

How fast does your revo run with the os 18

[TheTwitch96]

hey i have a tmaxx 4910 truck and i got a new engine. the savage 4.6 engine. would i need to upgrade my trannsmission with this upgrade?

[xxDankLongboardsxx]

More toutirials on the revo

[DJaftershocks]

Can you do more reviews, unboxings, tutorials, and something like ask squirrel.

[1698oscar]

not that this has happened 2 me but wat would u hav 2 do about 2stroke engine (baja 5b) flooded engine

[nitromad48]

@1698oscar Same as a nitro, just pull the spark plug out, and tip it upside down, and pull the starter 2 or 3 times and put the spark plug back in.

[jccb487]

@nitromad48 Do u have lots of problems with your revos clutch do u have an upgraded one or is it just stock and i nootice in the clutch bell they have metal sealed bearing and at my hobby shop he keeps giving me rubber sealed bearings and when i take of the clutch the rubber seals are missing and half the balls for the bearings does this happen to u i have the stock clutch system on a os 21tm and i dont know why its happening is the clutch overheating??? it happens every 1 or 2 tanks plz Help!!!

[nitromad48]

@jccb487 I just have the stock one, except for my bearings. I dont use the rubber ones. But you shouldnt be having those problems, unless you dont have any play in the bell. That will cause it to blow.

[jccb487]

@nitromad48 Then what bearings do u run in the revo the balls bearing just fall out when i open the clutch bell the ball bearings just fall out and the middle ring of the bearing just falls out it almost looks like the clutch and bearing OVER HEAT!!! and the guy at my hobby shop says not to drive on the grass do u drive on the grass what do u think about this???

[nitromad48]

@jccb487 I run the RC Boca bearings. and not to run on grass is just dumb. I rip my trucks on grass all the time, if you have a properly set up clutch, and slipper, grass should even be remotely a problem. He would only be saying that because he doesnt know how to set up his clutch properly. Make sure you have minimum 1mm of play on the bell, grab the boca bearings, you can get them off their site, and be sure your slipper has a little slip but not much or else if will overheat.

[Pyromaniac1827]

i want more tutorials.

[Xx408cXx]

Hey bro nice work on ur revo!! Jus wanted to know if u had a revo 2.5r? I just bought one on ebay for a project truck but didnt know it was missin so many parts specially on the throttle its missin those parts n the steering dude gave me servos but missin parts as well lol ! This is my first revo truck n having problems on were the parts suppose to go n wat other parts i need but i did hav a tmaxx .15 n a savage b4 but im kinda new with the revo parts mayb u cud help me out how everything is su

[1698oscar]

the rc action vid was awsome cant wait for more vidz

[traxxasdriver101]

@ kewl nitro and thx for the responds haha

[alecpahios]

You should make a video showing the differences and feature of the losi eight 2.0 and the losi eight-t 2.0

[xtm100]

@nitromad48 i have a question about your revo, is that a small block OS with a big block pipe? or what please reply

[nitromad48]

@xtm100 Lol yes it is, works amazing! I just threw a big block gasket over the small block gasket and it works wonders! ;)

[xtm100]

@nitromad48 ok might put my jp-4 on my OS revo when i get it on friday thanks

[traxxasdriver101]

Can u put a wing on the slayer pro cause I want to do tht with mine and how Mich does a wing cost

[nitromad48]

@traxxasdriver101 Yes you can use the revo wing mount. And it costs about $30 for the mount and depending on the wing itself around $20-$30.

[Geofiveo]

What is your wing setup on the Losi? Looks a little different and more secure. Thanks

[nitromad48]

@Geofiveo I've had several people ask me that, I'll make a vid for you guys ;)

[thecomputernerd0111]

running videos

[traxxasman555]

Loved the running vid what do u think is better a traxxas summit or a slash 4x4

[nitromad48]

@traxxasman555 If your doing more crawling and serious terrain bashing then you'll want the summit. If you want top speed and agility and race-ability then you'll want the slash 4x4 ;)

[offspringfanman96]

i was also wondering if you knew of really good 2 or 3 channel radio systems under 80 bucks?

[nitromad48]

@offspringfanman96 27MHZ or 2.4GHZ?

[offspringfanman96]

@nitromad48 dosnt matter, would prefer a 2.4 :)

[nitromad48]

@offspringfanman96 Go for the spektrum DX3E. Good radio for the price and it's still 2.4GHZ.

[offspringfanman96]

@nitromad48 how much??

[nitromad48]

@offspringfanman96 $99.

[offspringfanman96]

@nitromad48 thats a little over my price range, do they make a 2 channel 2.4 gig?

[nitromad48]

@offspringfanman96 I would look into a used radio then. Try to get a used DX2.0. You can get them real cheap ;)

[offspringfanman96]

can you change the background music, i think its somewhat distracting.

[tornadofreak100]

running vids

[masonis1]

running videos are awesome!

[katpis]

Hey josh, its hard to say i like both the running and the tutorials, personally i love the running videos, unless i dont know how to take somthing apart, then i will run to your channel and look it up... but i really like your editing so i have to say running vids.....

as for electrics have a buddy i will be bashing with he has a eRevo with a 6s lipo... i should have some vids of that thing on my channel this week.. stay tuned...

[1003676]

i think tutorials would be better

[SuperHonda11]

some runnin vids of the baja 5b on track vs a nitro or a hpi petrol or king motors will be cool :)

[RCRacing88]

Video response: Revo reciever box and servo mount

[SuperHonda11]

man not just the rc action video is good,every vid you have done is epic

[nitromad48]

@SuperHonda11 Thanks man! Lots more to come!

[savage76893]

@nitromad48 i got to agree with superhonda11 iv watch every video of yours there fuckin awsome

[nitromad48]

@savage76893 Thanks bro!

[RClimits]

make a vid of your shop, i havent been there in a while and it looks like have done some changes

[nitromad48]

@RClimits Yeah I might do that when I get the chance.

[martinrc1996]

more running vids! :)

[TheRacerKing105]

like 75% how to and 25% running

lots of baja running

[idrummerboy13]

maybe some electric ..

[2much0wnag3]

Hey could you tell me what cut off/ failsafes i need to run when using a 1/5 scale and could you give the brands if possible, thanks much appreciated :)

[Pesco420]

more running videos please.

[2much0wnag3]

Good Video, could you do more tips and tricks because your trucks look awsome!

[JMONEY09O8]

So are you still goin brushless on anything.Never thought i would go brushless ither until i drove one and i was hooked.

[keith179150]

losi 8-eight t 2.0 rtr

[martinrc1996]

@keith179150 so true, the 8ight is the best car i ever have owned!!!

[r2koooolmi]

THAT LAST VID WAS "F"ING AMAZING!!!!