How to Repair and Disassemble a PSP 1000

[bolimac]

holy crap!! I was considering changing the shell but now I'm not so sure anymore

[dzitiatri]

Remember when assembling to take on the metal protection wall at 12:20

[iwkab7]

Very good Tutorial i heve done everything like you, then i put everything together but ther is one thing i still heve one part left ;)

Doesn`t matter my PSP is working perfectly thx.

[MEGAONE302]

You forgot the UMD door spring.

[Dante66642]

can help my psp is a fat 1000 i accidentally drop it from my bed i guess its a 2-3 feet drop my sd card flew from my psp and of course my psp shut off as i try turn it on the green light goes on but the screen stays black when i tried to shut it off again it wont do anything either taking the battery or letting its battery run out will turn of the psp sometimes miraculously its works perfects but most of the time happens the same turns green but the screens stays black and wont shut off

[x12creations]

Please do a 2000 tutorial!

[MrCrashReboot]

insane

[JStarkers]

Thanks for this, helped me alot to get to the memory card reader and once there i bent the pins down and now it reads the mem card again!

[MrT14177]

Yes!! It did help switch my psp back plate

!!!:)

[Jaimegirl96]

do you have to completely disassemble and reassemble the psp if you are wanting to change shells?

[PowerbookMedic]

@Jaimegirl96 - Yes.

[Jaimegirl96]

@PowerbookMedic ugh, thanks for replying lol

[mdmazumdar]

@PowerbooHow to repair a broken memory slot cover

[SUPERIORSoundwave8]

thanx for how to detach lcd screen im trying to fix my wifi switch but damn history hw and hunting o and thanx i liked and subed

[dadabluesy]

HELP ME!!! I just got through putting my psp in a new case and everything is working fine except my joystick. It is only working on down and get stuck in this direction. It is a brand new joystick my old one work fine too in old case, could my new case be too tight. Email me@ dandarroux@yahoo.com

[oscarguzman70]

this was very useful for me great detailing for it 

[pinetree4c]

This is great, I am trying to get the wifi to work, and the switch is broken off, are there steps I can skip? Or am I going to be able to do anything to correct the problem anyway?

[PowerbookMedic]

@pinetree4c - You'll have to replace the component.

[MatYangO]

@pinetree4c Same with me, it was on off while it dropped from a table with the WLAN switch faced down so it's now stuck in off :(

[phattacorider]

Damn, sucks the UMD door removal is one of the last steps :(

[TGIxJ4BB3RxMODZxTUTS]

Thumbs up if your screws rounded off :(

[cwbychsr]

Can you do a video on a full assemble of PSP 1001, from just parts? Plz!

[vegitogogetagohan]

AMAZING TUTORIUL! please i am begging you. i have bought a new housing case for my psp 1000 and i am really confused on how to put it in the new case .... please oh please make the same "HD 10/10 tutoriul on how to put the psp in the new case. Thanks. i will be so happy and subscribe on top if you do that :) and again please.

[soulflame456]

just bought a new housing cover for my psp but dont really think i'll be able to do all that to change it :S

[iM1LT0N]

one of my gold pins is broken from the memory card slot, and I was wandering if could could fix it myself? because when I put my memory stick in the slot my psp turns off and I can't use my saved data.

[HeRnAnDeZ503100]

I Just bought a housing for the psp 1000...can you make a tutorial or explain me how to take of the back and front face plates ... plz

[tabio01]

Whats That Clear Thing That Makes The Analog Stick Move??Because I Lost Mine And I Wanna Buy One... I Just Dont Know The Name

[modestas31]

nice thx very good video best :)

[fandomshikashu]

Oh it was a pain in the behind actually fixing this thing! Cleaning saliva out of the power surge board, then fixing two screws (which I wasn't supose to take out) to the point that I had to almost take the whole PSP apart (some parts did not budge, but found workaround)!

Anyway, great tutorial in showing what is needed for several parts (needed flat tool!) and for giving your time to teach us the steps to repair the PSP 1000 series! Thanks!!!

[OmegPirate]

great video. i hate sony right now though. the screws in mine seem to all be over tightened and i even had to take a dremil to one of them. seriously those really flat silver ones just refuse to loosen and the metal is too soft so the head is ruined after 1 try... oh and also what size screwdriver should i use for the last 4 screws in the umd drive? double 0 just isnt small enough.

[16redshift]

damn i cant remove my bottom screw

[Kazei0]

Can you please tell me, how hard is it to put everything back once you take most of it apart? I think I need to replace my charging socket and it LOOKS easy except for the part where you have to unhook a plug/cord.. Are those hard to put back too?

[PowerbookMedic]

@Kazei0 - Putting it back together is not that difficult.

[perfectseal123]

yes it was really difficult putting it together

[Telekenetoh]

@Kazei0 it's as hard to put back together as you make it. Diagram it step by step and you're fine.

[pinedae77]

@POWERBOOKMEDIC What model is that psp? Is it a ta-79 or a Ta-86

[navi1007]

ok so once you open it what are you supposed to do?

[PowerbookMedic]

@navi1007 - It depends on what you need to repair.

[navi1007]

@PowerbookMedic oh and how do you repair it?

[demonslayer9101]

very nice mate, thanks alot for this, gonna use this guide to do a case mod on my psp :)

[XxDeViLBrInGeRxX]

question:to change the earphone plug, do I have to weld?

[zeshybadboy]

LOL nice video but u accidently said A B Y S <<< thats DS :L 

[ModdingTutorials27]

Great Tutorial!!