CLaNZeR looking at the Flexible V-Ramp Part 4

[pgpeachess]

my two cents -i don't know how you say it in UK: why couldn't the sides of that drum be built like the blue wing part, which will be eliminated and could the top magnet be attached to some sort of spring?

PS. why don't you listen to the people telling you that it's never going to work? i'll answer that for you: it's already been done by others (and maybe even by you).

[soverato3]

you know its never going to work.... so why are you making this?

[perpetualmotion100]

alot of people are in need of free energy, not just the well off looking for a cheaper way . people can run dehumidifiers to make water, power farms.STOP POVERTY NOW! and the GASOLOONS! not to mention pollution this system of slavery. What the hell is stopping YOU!?i can see in the pictures your well off fully capable of finishing this project yet its been years since you started . SLOTH !

[pwleigh]

The cam needs to have a magnet glued to the end and the riser bar a magnet on it, Both north or south facing. By doing this the cam need not hit the riser bar at all

[catatuning89]

if u gonna build this motor please try to replace that liniar magnet over the top with an electromagnet and post the results

[thepresident1981]

im gonna biuld one of these

btw im gonna use 1 magnet for the cam and not 2 but thats just me

[robot797]

more of this pleas

[B1TSH1FT3R]

In all the replication effort i have seen, I notice nobody put in the little magnet "nudger" that is under the wheel and activasted by the same cam that lifts the top bar.

Which makes me realize that the motor must be real weak if that nudger is all that keeps it going.

[shalom1181]

i am sure you get a thousand questions a day but, what do you cut the Plexiglas glass pieces with? i did it with a jig saw... not a pretty sight....

[XxWhoopiexX]

You are a very good worker, Sean!

Greetings from Peter

[NuArkdUBSTEp]

what about a spring to take a little bit of extra weight off the bar? so it pushes up nice and easy aswell

[MadWizard777]

Great work. Keep it coming. 2011: The year overunity is achieved !

[shubus]

Yah, I think Upuauta has a good idea....adding a 2nd cam on the other side will solve the friction and movement issues of the bar.

[Blurns]

in Roobert33's video he used a bearing on his bar to reduce the friction, but repelling magnets on the cam is a pretty neat idea too.

[llewgnal]

Put magnets on edge of the cam,,,

Gary

[marthale7]

Suggest a counter spring or even a helium ballon on the rod for counter weight :-) Nice work.

[Upuauta]

Hi CLaNZeR, How about adding a second Cam on the other side and even guide on the other side. Now with one Cam it´s pushing it up, but because it´s only on one side it (difficult to say for me) some how cants the thing so hindering the up/down movement. But great work so far. I think you´re very close to let it run. I wish you a happy new year.